AT04-08PD-PM15 Equivalent & Substitute Parts

Part Overview

The AT04-08PD-PM15 is an 8-position rectangular connector receptacle housing manufactured by Amphenol Sine Systems Corp as part of the PanelMate™ AT series. This panel-mount receptacle housing accommodates male pin contacts with crimp termination and features IP67-rated sealing, a mounting flange, and strain relief. The part is classified as Active product status with full RoHS3 compliance and REACH unaffected designation. Substitute parts are identified when equivalent electrical and mechanical parameters are required but alternative housing colors are acceptable for application requirements.

Substiute Parts

AT04-08PD-PM15

Amphenol Sine Systems CorpIn Stock: 1204AT04-08PD-PM15 Datasheet

Current PartRFQ

AT04-08PA-PM15

Amphenol Sine Systems CorpIn Stock: 1068AT04-08PA-PM15 Datasheet

Parametric EquivalentRFQ

AT04-08PC-PM15

Amphenol Sine Systems CorpIn Stock: 913AT04-08PC-PM15 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the AT04-08PD-PM15 are determined by equivalence across all critical electrical and mechanical parameters. The substitution logic is based on the following criteria:

Substitution-Determining Parameters:

• Connector type (Receptacle)
• Contact type (Male Pin)
• Number of positions (8)
• Number of rows (2)
• Mounting type (Panel Mount)
• Contact termination method (Crimp)
• Fastening type (Latch Holder)
• Feature set (IP67, Mounting Flange, Sealed, Strain Relief)
• Insulation material (Thermoplastic)
• Operating temperature range (-55°C ~ 125°C)
• Series designation (PanelMate™ AT)
• Compliance certifications (RoHS3, REACH Unaffected)

Variable Parameter:

• Housing color (Brown, Gray, Green)

The AT04-08PD-PM15, AT04-08PA-PM15, and AT04-08PC-PM15 are functionally equivalent across all electrical and mechanical specifications. These parts differ only in housing color, which does not affect electrical performance, mechanical compatibility, or environmental sealing characteristics. All three parts share the same base product number prefix (AT04-08P) with color designation suffixes (D, A, C).

Parameter Comparison

Engineering Selection Recommendations

All three parts—AT04-08PD-PM15, AT04-08PA-PM15, and AT04-08PC-PM15—are Active status products with identical electrical and mechanical specifications. Selection between these parts is based on housing color requirements and inventory availability.

Compliance Status: All substitute parts maintain ROHS3 compliance and REACH unaffected designation, ensuring regulatory equivalence for applications subject to these standards.

Functional Equivalence: The parts are electrically and mechanically interchangeable. The 8-position, 2-row configuration, IP67 sealing, panel-mount design, and crimp termination method are identical across all three variants.

Inventory Considerations: The AT04-08PD-PM15 (Brown) has the highest inventory level at 1187 pieces. The AT04-08PA-PM15 (Gray) maintains 1056 pieces, and the AT04-08PC-PM15 (Green) has 833 pieces available.

Selection should prioritize application-specific color requirements. When color is not a functional constraint, any of the three parts satisfies the electrical and mechanical requirements of the PanelMate™ AT series 8-position receptacle housing specification.

Frequently Asked Questions (FAQ)

Q: Are AT04-08PD-PM15, AT04-08PA-PM15, and AT04-08PC-PM15 electrically identical?

A: Yes. All three parts are electrically identical. They share the same 8-position, 2-row configuration, male pin contact type, crimp termination, and IP67 sealing characteristics. The only difference is housing color.

Q: Can I substitute AT04-08PA-PM15 (Gray) for AT04-08PD-PM15 (Brown) in my application?

A: Substitution is valid if housing color is not a functional requirement. All electrical, mechanical, and environmental specifications are equivalent. Both parts operate across the same temperature range (-55°C ~ 125°C) and maintain identical sealing and fastening characteristics.

Q: Do these parts require contacts to be purchased separately?

A: Yes. All three housing variants are supplied without contacts. Male pin contacts must be sourced and crimped separately according to application requirements.

Q: What is the difference between the base product numbers AT04-08PD, AT04-08PA, and AT04-08PC?

A: The base product numbers differ only in the color designation suffix. AT04-08PD denotes Brown, AT04-08PA denotes Gray, and AT04-08PC denotes Green. All other specifications remain identical.

Q: Are all three parts RoHS3 compliant?

A: Yes. AT04-08PD-PM15, AT04-08PA-PM15, and AT04-08PC-PM15 are all ROHS3 compliant and REACH unaffected, meeting regulatory requirements for restricted substance use.

Q: Can these receptacle housings be used with different contact types?

A: No. These housings are designed specifically for male pin contacts with crimp termination. The internal geometry and fastening mechanism are configured for this contact type only.

Q: What does the "PM15" suffix indicate in the part number?

A: The PM15 suffix indicates the specific packaging configuration. All three variants share this packaging designation, confirming they are supplied in the same box packaging format.

Q: If my application requires a specific housing color for identification purposes, which part should I select?

A: Select based on your color requirement: AT04-08PD-PM15 for Brown, AT04-08PA-PM15 for Gray, or AT04-08PC-PM15 for Green. All three parts are functionally equivalent and will perform identically in the application.