AT04-08PB-PM16 Equivalent & Substitute Parts

Part Overview

The AT04-08PB-PM16 is an 8-position rectangular connector receptacle housing manufactured by Amphenol Sine Systems Corp as part of the PanelMate™ AT series. This panel-mount receptacle housing features a black thermoplastic body with IP67 rating, mounting flange, reduced wire seals, and strain relief. The connector accommodates male pin contacts via crimp termination and utilizes a latch holder fastening mechanism. The part is currently active in production with ROHS3 compliance and REACH unaffected status. Substitute parts are necessary when specific color coding requirements, inventory availability, or application-specific identification schemes necessitate alternative housing colors while maintaining identical electrical and mechanical specifications.

Substiute Parts

AT04-08PB-PM16

Amphenol Sine Systems CorpIn Stock: 1073AT04-08PB-PM16 Datasheet

Current PartRFQ

AT04-08PA-PM16

Amphenol Sine Systems CorpIn Stock: 936AT04-08PA-PM16 Datasheet

Parametric EquivalentRFQ

AT04-08PC-PM16

Amphenol Sine Systems CorpIn Stock: 1244AT04-08PC-PM16 Datasheet

Parametric EquivalentRFQ

AT04-08PD-PM16

Amphenol Sine Systems CorpIn Stock: 1064AT04-08PD-PM16 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The AT04-08PB-PM16 and its substitute parts form a parametric equivalent group within the PanelMate™ AT series. All parts in this group share identical electrical and mechanical specifications across the following critical parameters: 8-position configuration, 2-row arrangement, panel-mount installation, crimp contact termination, latch holder fastening, thermoplastic insulation material, -55°C to 125°C operating temperature range, IP67 environmental rating, mounting flange, reduced wire seals, and strain relief features. The substitution group differs only in housing color: Black (AT04-08PB-PM16), Gray (AT04-08PA-PM16), Green (AT04-08PC-PM16), and Brown (AT04-08PD-PM16). All parts maintain ROHS3 compliance, REACH unaffected status, and active product status. Substitution within this group is valid when color differentiation is the only design requirement variance.

Parameter Comparison

Engineering Selection Recommendations

All parts within this substitute group maintain active product status and full regulatory compliance. Selection between AT04-08PB-PM16 (Black), AT04-08PA-PM16 (Gray), AT04-08PC-PM16 (Green), and AT04-08PD-PM16 (Brown) is determined by application-specific color coding requirements or panel identification schemes. Each part carries ROHS3 compliance and REACH unaffected certification, ensuring equivalent environmental and regulatory standing. Inventory availability varies across the group: AT04-08PC-PM16 (Green) maintains the highest stock level at 1143 pieces, while AT04-08PA-PM16 (Gray) maintains the lowest at 867 pieces. All parts are packaged in boxes and carry identical electrical performance characteristics, mechanical dimensions, and environmental ratings. Selection should be based on color specification requirements and supply chain availability.

Frequently Asked Questions (FAQ)

Q: Are all parts in this substitute group electrically and mechanically identical?

A: Yes. All parts share identical specifications for connector type, contact configuration, position count, row arrangement, mounting method, termination type, fastening mechanism, insulation material, operating temperature range, and environmental features. The only difference is housing color.

Q: Can AT04-08PA-PM16, AT04-08PC-PM16, and AT04-08PD-PM16 be used interchangeably with AT04-08PB-PM16?

A: Substitution is valid when color differentiation is not a design requirement. If the application specifies black housing, only AT04-08PB-PM16 is appropriate. If color coding is used for circuit identification or panel organization, the specified color must be selected.

Q: Do all parts in this group require separate contact purchases?

A: Yes. All parts carry the note "Contacts Not Included." Male pin contacts must be procured separately and crimped into the housing during assembly.

Q: What is the difference between the base product numbers and the full part numbers?

A: The base product number (AT04-08PB, AT04-08PA, AT04-08PC, AT04-08PD) identifies the housing variant. The full part number includes the suffix "-PM16," which specifies the packaging configuration (Box). All variants use identical packaging.

Q: Are there any temperature or environmental performance differences between color variants?

A: No. All variants operate across the identical temperature range of -55°C to 125°C and maintain the same IP67 environmental rating, mounting flange design, reduced wire seals, and strain relief features.

Q: What compliance certifications apply to all parts in this group?

A: All parts are ROHS3 compliant and REACH unaffected. These certifications are uniform across the entire substitute group.

Q: Which part has the best inventory availability?

A: AT04-08PC-PM16 (Green) has the highest stock level at 1143 pieces. AT04-08PA-PM16 (Gray) has the lowest at 867 pieces. AT04-08PB-PM16 (Black) and AT04-08PD-PM16 (Brown) maintain intermediate levels at 1009 and 978 pieces respectively.