ASPI-F1010-6R8M-T Equivalent & Substitute Parts

Part Overview

The ASPI-F1010-6R8M-T is a 6.8 µH shielded molded inductor manufactured by Abracon LLC, rated for 18.5 A continuous current with a maximum DC resistance of 8.9 mOhm. This component is classified as an active product and is designed for surface mount applications in power conversion, filtering, and energy storage circuits. The part is packaged in Tape & Reel format and complies with RoHS3 and REACH standards.

Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity. Substitutes must maintain identical electrical performance across inductance value, current rating, DC resistance, and thermal operating range to ensure functional interchangeability in circuit applications.

Substiute Parts

ASPI-F1010-6R8M-T

Abracon LLCIn Stock: 1242ASPI-F1010-6R8M-T Datasheet

Current PartRFQ

EXL1V1010-6R8-R

Eaton - Electronics DivisionIn Stock: 1440EXL1V1010-6R8-R Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ASPI-F1010-6R8M-T are identified based on strict parametric equivalence across all critical electrical and mechanical specifications. The substitution logic is based on the following key parameters:

Electrical Parameters:

• Inductance value: 6.8 µH
• Inductance tolerance: ±20%
• Continuous current rating: 18.5 A
• Saturation current (Isat): 18.5 A
• DC resistance maximum: 8.9 mOhm
• Operating temperature range: -40°C to 125°C
• Inductance test frequency: 100 kHz

Mechanical Parameters:

• Core material: Alloy Powder
• Shielding: Shielded
• Mounting type: Surface Mount
• Package dimensions: 11.90 mm × 11.00 mm × 10.00 mm (maximum height)
• Packaging format: Tape & Reel

Compliance Parameters:

• RoHS compliance status
• Moisture sensitivity level: 1 (Unlimited)

Parts are classified as substitutes only when all electrical parameters, mechanical dimensions, and compliance certifications match the main part specification. No deviations in inductance, current rating, DC resistance, or thermal range are permitted for substitution classification.

Parameter Comparison

Engineering Selection Recommendations

ASPI-F1010-6R8M-T (Abracon LLC)

This is the primary part specification. It is an active product with RoHS3 compliance and REACH unaffected status. The part carries MSL 1 rating, indicating unlimited moisture sensitivity protection. Current inventory availability is 1189 pieces in new original condition.

EXL1V1010-6R8-R (Eaton - Electronics Division)

This part is a parametric equivalent substitute with identical electrical and mechanical specifications. It is an active product with RoHS compliance and MSL 1 rating. Current inventory availability is 1344 pieces in new original condition. The substitute part includes a specified self-resonant frequency of 15 MHz, which is not provided for the main part but does not affect substitution eligibility.

Both parts are suitable for direct substitution in applications requiring a 6.8 µH shielded molded inductor with 18.5 A current rating and 8.9 mOhm maximum DC resistance. Selection between the two parts may be based on procurement lead time, inventory availability, cost, or supply chain preference, as all electrical and mechanical parameters are equivalent.

Frequently Asked Questions (FAQ)

Q: Can the EXL1V1010-6R8-R be used as a direct replacement for the ASPI-F1010-6R8M-T?

A: Yes. The EXL1V1010-6R8-R is a parametric equivalent with identical inductance (6.8 µH), current rating (18.5 A), DC resistance (8.9 mOhm maximum), operating temperature range (-40°C to 125°C), and physical dimensions (11.90 mm × 11.00 mm × 10.00 mm maximum height). Both parts are shielded molded inductors with alloy powder cores and surface mount packaging in Tape & Reel format.

Q: Are there any differences in compliance or certification between these parts?

A: Both parts are active products with MSL 1 rating. The ASPI-F1010-6R8M-T carries RoHS3 compliance and REACH unaffected status. The EXL1V1010-6R8-R carries RoHS compliance. Both certifications are compatible for applications requiring environmental compliance. The HTSUS codes differ (8504.50.4000 versus 8504.50.8000), which may affect tariff classification in specific trade scenarios.

Q: What are the critical parameters that must match for substitution?

A: Substitution requires matching of inductance value (6.8 µH), inductance tolerance (±20%), continuous current rating (18.5 A), saturation current (18.5 A), DC resistance maximum (8.9 mOhm), operating temperature range (-40°C to 125°C), shielding type (shielded), core material (alloy powder), and physical dimensions (11.90 mm × 11.00 mm × 10.00 mm maximum height). All these parameters are identical between the main part and substitute.

Q: Does the self-resonant frequency specification affect substitution?

A: The self-resonant frequency is not specified for the ASPI-F1010-6R8M-T but is specified as 15 MHz for the EXL1V1010-6R8-R. This parameter does not affect substitution eligibility, as it is not a matching criterion for the main part. Both parts are suitable for applications operating at the specified 100 kHz inductance test frequency and within the -40°C to 125°C thermal range.

Q: Are the packaging formats identical?

A: Yes. Both parts are supplied in Tape & Reel (TR) format, which is the standard surface mount packaging for high-volume production applications. The physical package dimensions and height are identical, ensuring compatibility with automated assembly equipment and PCB layouts designed for either part.

Q: What inventory considerations should be evaluated?

A: The ASPI-F1010-6R8M-T has 1189 pieces available in new original condition. The EXL1V1010-6R8-R has 1344 pieces available in new original condition. Inventory selection may be based on procurement timeline, supply chain logistics, or cost optimization, as both parts are active products with equivalent specifications.