ASPI-F1010-100M-T Equivalent & Substitute Parts

Part Overview

The ASPI-F1010-100M-T is a 10 µH shielded molded inductor manufactured by Abracon LLC, designed for surface mount applications requiring high current handling capability. This component features an alloy powder core with a current rating of 15.5 A and saturation current of 14.6 A, making it suitable for power conversion and filtering applications in industrial and commercial electronics. The part is active in production with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical and mechanical parameters are required due to component availability, supply chain considerations, or design flexibility within established specifications.

Substiute Parts

ASPI-F1010-100M-T

Abracon LLCIn Stock: 1352ASPI-F1010-100M-T Datasheet

Current PartRFQ

EXL1V1010-100-R

Eaton - Electronics DivisionIn Stock: 1242EXL1V1010-100-R Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ASPI-F1010-100M-T is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Inductance value: 10 µH at 100 kHz test frequency
• Inductance tolerance: ±20%
• Current rating: 15.5 A continuous
• Saturation current: 14.6 A minimum
• DC resistance: 13.75 mOhm maximum

Mechanical & Physical Parameters:

• Core material: Alloy powder construction
• Shielding: Shielded configuration required
• Mounting: Surface mount technology
• Package dimensions: 0.469" L × 0.433" W × 0.394" H maximum (11.90mm × 11.00mm × 10.00mm)
• Package format: Nonstandard case

Environmental & Compliance Parameters:

• Operating temperature: -40°C to 125°C
• Moisture sensitivity: MSL 1 (Unlimited)
• Packaging: Tape & Reel format

The EXL1V1010-100-R from Eaton - Electronics Division meets all specified parameters and is classified as a parametric equivalent substitute.

Parameter Comparison

Engineering Selection Recommendations

Both the ASPI-F1010-100M-T and EXL1V1010-100-R are active production components with full regulatory compliance. Selection between these parts is based on the following engineering criteria:

Compliance Status: The ASPI-F1010-100M-T carries RoHS3 compliance certification. The EXL1V1010-100-R carries RoHS compliance certification. Both parts are REACH unaffected and classified under ECCN EAR99 for export control purposes.

Supply Chain Considerations: Current inventory levels show 1295 pieces of ASPI-F1010-100M-T and 1148 pieces of EXL1V1010-100-R available as new original stock. Both components are supplied in Tape & Reel packaging format suitable for automated assembly processes.

Electrical Performance: All critical electrical parameters are identical between the two parts, including inductance value, current ratings, saturation characteristics, and DC resistance specifications. Both components operate across the identical temperature range of -40°C to 125°C.

Physical Compatibility: Both parts share identical footprint dimensions and height specifications, ensuring direct mechanical substitution on printed circuit boards without layout modifications.

Component Selection Logic: Selection should be based on availability, lead time requirements, and established supplier relationships. No performance differentiation exists between the two parts within the specified operating parameters.

Frequently Asked Questions (FAQ)

Q: Can the EXL1V1010-100-R be used as a direct replacement for the ASPI-F1010-100M-T?

A: Yes. The EXL1V1010-100-R is a parametric equivalent substitute. All electrical specifications, physical dimensions, and environmental ratings are identical. Direct substitution is supported without circuit modifications.

Q: Are there any differences in the inductance value or tolerance between these parts?

A: No. Both parts specify 10 µH inductance with ±20% tolerance, measured at 100 kHz test frequency.

Q: Do both parts have identical current handling capabilities?

A: Yes. Both the ASPI-F1010-100M-T and EXL1V1010-100-R are rated for 15.5 A continuous current with 14.6 A saturation current and 13.75 mOhm maximum DC resistance.

Q: Are the physical dimensions identical for PCB layout purposes?

A: Yes. Both parts measure 0.469" L × 0.433" W (11.90mm × 11.00mm) with a maximum seated height of 0.394" (10.00mm). No layout modifications are required when substituting between these parts.

Q: What is the operating temperature range for both components?

A: Both parts operate across -40°C to 125°C. This range is identical for both the ASPI-F1010-100M-T and EXL1V1010-100-R.

Q: Are both parts supplied in the same packaging format?

A: Yes. Both components are supplied in Tape & Reel (TR) format, suitable for automated pick-and-place assembly equipment.

Q: What are the moisture sensitivity ratings for these inductors?

A: Both parts carry MSL 1 (Unlimited) moisture sensitivity level, indicating no special moisture control requirements during storage or handling.

Q: Do both parts meet RoHS compliance requirements?

A: Yes. The ASPI-F1010-100M-T meets RoHS3 compliance, and the EXL1V1010-100-R meets RoHS compliance. Both are REACH unaffected.

Q: Is there a difference in the self-resonant frequency between these parts?

A: The ASPI-F1010-100M-T does not specify a self-resonant frequency value. The EXL1V1010-100-R specifies 10 MHz self-resonant frequency. This parameter difference does not affect substitution eligibility based on the provided electrical and mechanical specifications.

Q: Can these parts be used interchangeably in high-frequency applications?

A: Both parts are tested and specified at 100 kHz inductance test frequency. Application suitability at frequencies above this specification requires evaluation against the specific circuit requirements and frequency-dependent performance characteristics of the application.