ASPIAIG-H6530-2R2M-T Equivalent & Substitute Parts

Part Overview

The ASPIAIG-H6530-2R2M-T is a 2.2 µH shielded drum core wirewound inductor manufactured by Abracon LLC, rated for 8 A continuous current with 18mOhm DC resistance. This component is classified as obsolete, making equivalent and substitute parts necessary for ongoing production and maintenance applications. The part is AEC-Q200 qualified and RoHS3 compliant, suitable for automotive and industrial applications requiring reliable inductance in surface mount configurations.

Substiute Parts

ASPIAIG-H6530-2R2M-T

Abracon LLCIn Stock: 1058ASPIAIG-H6530-2R2M-T Datasheet

Current PartRFQ

MPXV1D0630L2R2

KEMETIn Stock: 2053MPXV1D0630L2R2 Datasheet

DirectRFQ

SDCHA1V6045-2R2-R

Eaton - Electronics DivisionIn Stock: 2333SDCHA1V6045-2R2-R Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ASPIAIG-H6530-2R2M-T are selected based on the following critical parameters that must align with the original specification:

Primary Matching Criteria:

• Inductance value: 2.2 µH (±20% tolerance acceptable)
• Current rating: minimum 8 A continuous
• DC resistance: 18 mOhm or lower
• Shielding: Shielded or semi-shielded configuration
• Mounting: Surface mount, nonstandard package
• Compliance: AEC-Q200 qualified, RoHS3 compliant
• Operating temperature: -40°C minimum to 125°C maximum

Substitute Parts Identified:

1. MPXV1D0630L2R2 (KEMET) - Direct equivalent with enhanced specifications
2. SDCHA1V6045-2R2-R (Eaton - Electronics Division) - Functional equivalent with different core material

Both substitutes maintain the 2.2 µH inductance value, meet or exceed current rating requirements, and satisfy all compliance certifications. Differences in core material, DCR, and physical dimensions are documented in the parameter comparison table below.

Parameter Comparison

Engineering Selection Recommendations

MPXV1D0630L2R2 (KEMET) is the primary direct equivalent. This part maintains shielded configuration, exceeds the original current rating (8.7 A vs. 8 A), and provides comparable DC resistance (18.3 mOhm Max vs. 18 mOhm). The extended operating temperature range (-55°C to 155°C) provides additional margin beyond the original specification. Physical dimensions are nearly identical (7.00 mm x 6.50 mm vs. 7.10 mm x 6.50 mm), with slightly reduced height (3.00 mm vs. 3.20 mm). AEC-Q200 qualification and RoHS3 compliance are maintained. This part is recommended for direct substitution in applications where the original ASPIAIG-H6530-2R2M-T is no longer available.

SDCHA1V6045-2R2-R (Eaton) is a functional equivalent with design trade-offs. The semi-shielded configuration and nickel zinc ferrite core material differ from the original metal core design. The continuous current rating is reduced to 6 A, which is below the original 8 A specification and unsuitable for applications requiring the full 8 A rating. However, the saturation current (9.5 A) and DC resistance (15 mOhm) are favorable. The significantly higher self-resonant frequency (55 MHz vs. 24 MHz) indicates different frequency response characteristics. Physical dimensions are smaller (6.00 mm x 6.00 mm), but height is increased (4.50 mm vs. 3.20 mm). This part is suitable only for applications with current requirements of 6 A or less and where the different core material and shielding characteristics are acceptable.

Both substitutes are active products with established supply chains, addressing the obsolescence of the original part.

Frequently Asked Questions (FAQ)

Q: Can MPXV1D0630L2R2 be used as a direct replacement for ASPIAIG-H6530-2R2M-T?

A: Yes. Both parts share identical inductance (2.2 µH), tolerance (±20%), and inductance test frequency (100 kHz). The KEMET part exceeds the current rating requirement (8.7 A vs. 8 A) and maintains comparable DC resistance (18.3 mOhm Max vs. 18 mOhm). Physical dimensions are nearly identical, with the KEMET part being slightly smaller in footprint and height. Both are AEC-Q200 qualified and RoHS3 compliant. This is the recommended substitute.

Q: Is SDCHA1V6045-2R2-R compatible with the original part?

A: Compatibility depends on application current requirements. The Eaton part is rated for 6 A continuous current, which is below the original 8 A specification. If your application requires the full 8 A rating, this part is not suitable. The semi-shielded configuration and different core material (nickel zinc ferrite vs. metal) produce different electromagnetic characteristics, including higher self-resonant frequency (55 MHz vs. 24 MHz). Use this part only in applications with 6 A or lower current requirements and where the different shielding and frequency response are acceptable.

Q: What are the key differences in physical dimensions?

A: MPXV1D0630L2R2 dimensions are 7.00 mm x 6.50 mm x 3.00 mm (height), compared to the original 7.10 mm x 6.50 mm x 3.20 mm. This represents a minimal footprint difference and reduced height, making it suitable for space-constrained layouts. SDCHA1V6045-2R2-R is significantly smaller in footprint (6.00 mm x 6.00 mm) but taller (4.50 mm), which may affect PCB layout compatibility depending on available vertical clearance.

Q: Are all substitute parts AEC-Q200 qualified?

A: Yes. Both MPXV1D0630L2R2 and SDCHA1V6045-2R2-R carry AEC-Q200 qualification, matching the original part. All three parts are RoHS3 compliant and have MSL rating 1 (Unlimited), indicating no moisture sensitivity concerns.

Q: What is the difference between shielded and semi-shielded inductors?

A: Shielded inductors (ASPIAIG-H6530-2R2M-T and MPXV1D0630L2R2) provide complete electromagnetic shielding, minimizing radiated emissions and susceptibility to external magnetic fields. Semi-shielded inductors (SDCHA1V6045-2R2-R) provide partial shielding, offering a balance between EMI performance and cost. For applications requiring full EMI suppression, shielded configurations are preferred.

Q: How do core materials affect inductor performance?

A: The original ASPIAIG-H6530-2R2M-T uses a metal core, MPXV1D0630L2R2 uses metal composite, and SDCHA1V6045-2R2-R uses nickel zinc ferrite. These materials produce different frequency response characteristics, saturation behavior, and temperature coefficients. The self-resonant frequency varies significantly: 24 MHz (metal), 30 MHz (metal composite), and 55 MHz (nickel zinc ferrite). Select based on your circuit's operating frequency and required bandwidth.

Q: What is the significance of DC resistance (DCR) values?

A: DCR represents resistive losses in the inductor winding. Lower DCR reduces power dissipation and heat generation. The original part specifies 18 mOhm, MPXV1D0630L2R2 specifies 18.3 mOhm Max, and SDCHA1V6045-2R2-R specifies 15 mOhm. For high-current applications, lower DCR is advantageous. SDCHA1V6045-2R2-R offers the lowest DCR, but its 6 A current rating limits its use in 8 A applications.

Q: Can I use these parts interchangeably in my design?

A: MPXV1D0630L2R2 is recommended for direct interchangeability. SDCHA1V6045-2R2-R requires design review if your application requires 8 A continuous current. Verify that the different core material, shielding type, and frequency response characteristics are compatible with your circuit requirements before implementation.