ASPIAIG-H6530-1R5M-T Equivalent & Substitute Parts

Part Overview

The ASPIAIG-H6530-1R5M-T is a 1.5 µH shielded drum core wirewound inductor manufactured by Abracon LLC, rated for 8.5 A continuous current with a DC resistance of 13.8mOhm. This component is designed for surface mount applications in power conversion and filtering circuits requiring low inductance values with high current capacity.

The ASPIAIG-H6530-1R5M-T is classified as obsolete. Identifying equivalent substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications currently utilizing this inductor.

Substiute Parts

ASPIAIG-H6530-1R5M-T

Abracon LLCIn Stock: 886ASPIAIG-H6530-1R5M-T Datasheet

Current PartRFQ

MPXV1D0630L1R5

KEMETIn Stock: 2276MPXV1D0630L1R5 Datasheet

MFR RecommendedRFQ

SDCHA1V6045-1R5-R

Eaton - Electronics DivisionIn Stock: 2132SDCHA1V6045-1R5-R Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ASPIAIG-H6530-1R5M-T are qualified based on the following electrical and mechanical parameters:

Primary Matching Criteria:

• Inductance value: 1.5 µH (±20% tolerance)
• Inductance tolerance: ±20%
• Mounting type: Surface Mount
• Inductance test frequency: 100 kHz
• AEC-Q200 compliance
• RoHS3 compliance

Secondary Compatibility Parameters:

• Current rating: minimum 8.5 A (saturation current ≥ 11.5 A)
• DC resistance: ≤ 13.8 mOhm (lower DCR preferred for thermal performance)
• Operating temperature range: must encompass -40°C ~ 125°C
• Shielding type: Shielded or Semi-Shielded acceptable
• Package dimensions: nonstandard surface mount packages with similar footprint and height constraints

The two qualified substitutes meet these criteria with variations in core material, current ratings, and thermal characteristics that remain within acceptable operating parameters for equivalent circuit applications.

Parameter Comparison

Engineering Selection Recommendations

MPXV1D0630L1R5 (KEMET) is the primary recommended substitute. This part maintains active product status with superior current rating (10.5 A vs. 8.5 A), lower DC resistance (12.7 mOhm vs. 13.8 mOhm), and extended operating temperature range (-55°C ~ 155°C). The metal composite core provides comparable performance to the original metal core design. Footprint dimensions (7.00mm x 6.50mm) are nearly identical to the main part, with slightly reduced height (3.00 mm vs. 3.20 mm), ensuring PCB layout compatibility. Full AEC-Q200 and ROHS3 compliance is maintained.

SDCHA1V6045-1R5-R (Eaton - Electronics Division) is a secondary substitute suitable for applications where current requirements do not exceed 7 A. This part offers the lowest DC resistance (11.7 mOhm) and highest self-resonant frequency (75 MHz), beneficial for high-frequency filtering applications. The semi-shielded design and nickel zinc ferrite core provide alternative electromagnetic characteristics. Footprint is smaller (6.00mm x 6.00mm) but height is increased (4.50 mm), requiring PCB layout verification. Full AEC-Q200 and ROHS3 compliance is maintained.

Both substitutes satisfy compliance requirements (AEC-Q200, ROHS3, REACH Unaffected, EAR99 classification) and moisture sensitivity specifications (MSL 1 - Unlimited).

Frequently Asked Questions (FAQ)

Q: Can MPXV1D0630L1R5 be used as a direct replacement for ASPIAIG-H6530-1R5M-T?

A: Yes. Both parts share identical inductance (1.5 µH), tolerance (±20%), and test frequency (100 kHz). The MPXV1D0630L1R5 exceeds the current rating requirement (10.5 A vs. 8.5 A) and provides lower DC resistance (12.7 mOhm vs. 13.8 mOhm). Footprint dimensions are nearly identical (7.00mm x 6.50mm vs. 7.10mm x 6.50mm), and height is slightly reduced (3.00 mm vs. 3.20 mm). PCB layout compatibility is maintained.

Q: What are the limitations of SDCHA1V6045-1R5-R as a substitute?

A: The SDCHA1V6045-1R5-R has a lower current rating (7.0 A vs. 8.5 A). This part is suitable only for applications where circuit current does not exceed 7 A. The footprint is smaller (6.00mm x 6.00mm vs. 7.10mm x 6.50mm) and height is increased (4.50 mm vs. 3.20 mm), requiring PCB layout verification. The semi-shielded design differs from the fully shielded original part.

Q: Are both substitutes AEC-Q200 qualified?

A: Yes. Both MPXV1D0630L1R5 and SDCHA1V6045-1R5-R carry AEC-Q200 ratings, meeting automotive-grade reliability standards equivalent to the original part.

Q: What is the impact of different core materials on circuit performance?

A: The original part uses a metal core, MPXV1D0630L1R5 uses metal composite, and SDCHA1V6045-1R5-R uses nickel zinc ferrite. These materials affect DC resistance, self-resonant frequency, and temperature stability. Metal composite (KEMET) provides the closest performance match to the original metal core design. Nickel zinc ferrite (Eaton) offers higher self-resonant frequency (75 MHz vs. 37 MHz), beneficial for high-frequency applications but with lower current capacity.

Q: Are there packaging differences between the main part and substitutes?

A: The main part and MPXV1D0630L1R5 are supplied in Tape & Reel (TR) packaging. Footprint dimensions are nearly identical. SDCHA1V6045-1R5-R is also supplied in Tape & Reel (TR) but has a smaller footprint (6.00mm x 6.00mm) and greater height (4.50 mm), requiring PCB design verification before implementation.

Q: Do all parts meet RoHS and REACH compliance requirements?

A: Yes. The main part and both substitutes are ROHS3 compliant, REACH Unaffected, and classified as EAR99 for export control purposes. All parts have MSL 1 (Unlimited) moisture sensitivity ratings.