ASJ-106-D-G-T/R Equivalent & Substitute Parts

Part Overview

The ASJ-106-D-G-T/R is a 4.60mm stereo phone jack connector manufactured by Adam Tech, designed for audio applications requiring a female surface mount, right angle configuration with solder termination. This connector features three conductors (TRS - Tip, Ring, Sleeve) for stereo signal transmission and includes a board guide for mechanical stability.

The ASJ-106-D-G-T/R is classified as obsolete. Locating equivalent substitute parts is necessary to maintain design continuity and ensure component availability for production and repair applications.

Substiute Parts

ASJ-106-D-G-T/R

Adam TechIn Stock: 896ASJ-106-D-G-T/R Datasheet

Current PartRFQ

SJ1-3513-SMT-TR

CUI DevicesIn Stock: 1889SJ1-3513-SMT-TR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ASJ-106-D-G-T/R is determined by strict alignment of the following parameters:

• Connector Type: Phone Jack with 4.6mm stereo (TRS) configuration
• Gender: Female
• Signal Lines: Stereo (3 Conductor, TRS)
• Mating Diameter: 4.60mm (0.141", 1/8", Mini Plug)
• Number of Contacts: 3 Conductors, 3 Contacts
• Mounting Type: Surface Mount, Right Angle
• Termination: Solder
• Shielding: Unshielded
• Contact Plating: Gold
• Mating Length/Depth: 0.551" (14.00mm)

The substitute part SJ1-3513-SMT-TR manufactured by CUI Devices meets all critical substitution criteria. Both connectors share identical mechanical interfaces, electrical signal configuration, and physical dimensions required for direct functional replacement in audio jack applications.

Parameter Comparison

Engineering Selection Recommendations

The SJ1-3513-SMT-TR is a direct functional equivalent to the ASJ-106-D-G-T/R for applications requiring a 4.6mm stereo phone jack connector with surface mount, right angle solder termination.

Selection of the SJ1-3513-SMT-TR is supported by the following factors:

• Both connectors maintain identical mechanical and electrical interfaces
• The substitute part is in active production status, ensuring long-term availability
• Both parts maintain ROHS3 compliance and REACH unaffected status
• Both parts carry MSL 1 (Unlimited) moisture sensitivity rating
• The substitute part operates across an extended temperature range (-25°C ~ 85°C versus -20°C ~ 70°C)
• The substitute part supports higher current capacity (1 A versus 500 mA)

Application-specific electrical requirements must be evaluated when the original design operates at the maximum voltage (30VDC) or current (500 mA) specifications of the ASJ-106-D-G-T/R, as the substitute part is rated for 12VDC maximum.

Frequently Asked Questions (FAQ)

Q: Can the SJ1-3513-SMT-TR be used as a direct replacement for the ASJ-106-D-G-T/R?

A: Yes. Both connectors share identical mechanical dimensions, contact configuration, mounting orientation, and termination method. The connectors are mechanically and electrically interchangeable for 4.6mm stereo audio jack applications.

Q: What are the key differences between these two connectors?

A: The primary differences are product status (obsolete versus active), operating temperature range, voltage rating, and current capacity. The SJ1-3513-SMT-TR supports extended temperature operation and higher current capacity. The ASJ-106-D-G-T/R is rated for higher voltage (30VDC versus 12VDC).

Q: Are there packaging differences between these connectors?

A: Both connectors are supplied in Tape & Reel (TR) packaging, suitable for automated assembly processes.

Q: What compliance certifications apply to both parts?

A: Both connectors are ROHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) moisture sensitivity ratings.

Q: Should I consider the voltage rating difference when selecting a substitute?

A: Yes. If your application requires operation at voltages exceeding 12VDC, the voltage rating difference must be evaluated against your circuit design specifications. The ASJ-106-D-G-T/R supports 30VDC operation, while the SJ1-3513-SMT-TR is rated for 12VDC maximum.