ASFL-6.000MHZ-C Equivalent & Substitute Parts

Part Overview

The ASFL-6.000MHZ-C is a 6 MHz oscillator manufactured by Abracon LLC. This part is classified as Obsolete and is no longer in active production. Due to its obsolete status, locating original inventory may present supply chain challenges. Identifying equivalent and substitute parts ensures design continuity and maintains project timelines when the original component becomes unavailable.

Substiute Parts

ASFL-6.000MHZ-C

Abracon LLCIn Stock: 1175ASFL-6.000MHZ-C Datasheet

Current PartRFQ

ASFL1-6.000MHZ-EC-T

Abracon LLCIn Stock: 1181ASFL1-6.000MHZ-EC-T Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ASFL-6.000MHZ-C is determined by the following critical parameters:

Frequency Match: The substitute part must operate at 6.000 MHz to maintain circuit timing specifications.

Compliance Alignment: Both the original and substitute parts must meet ROHS3 compliance and REACH unaffected status to satisfy regulatory requirements.

Moisture Sensitivity: MSL rating of 1 (Unlimited) indicates no moisture sensitivity constraints, allowing flexibility in substitute selection.

Manufacturer Continuity: Abracon LLC manufactures both the original and substitute part, ensuring design consistency and technical support continuity.

The ASFL1-6.000MHZ-EC-T is identified as the direct substitute for the ASFL-6.000MHZ-C based on matching frequency, compliance certifications, and manufacturer origin.

Parameter Comparison

Engineering Selection Recommendations

The ASFL1-6.000MHZ-EC-T is the appropriate substitute for the obsolete ASFL-6.000MHZ-C based on the following factors:

Product Status Transition: The ASFL1-6.000MHZ-EC-T holds Active product status, ensuring ongoing availability and manufacturer support, whereas the original part is Obsolete.

Regulatory Compliance: Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying environmental and regulatory requirements for new designs and production runs.

Moisture Sensitivity Alignment: Both parts carry MSL 1 (Unlimited) rating, indicating identical moisture handling requirements during storage and assembly.

Manufacturer Consistency: Abracon LLC manufactures both parts, maintaining design lineage and technical documentation continuity.

When transitioning from ASFL-6.000MHZ-C to ASFL1-6.000MHZ-EC-T, confirm that the circuit design accommodates the specified electrical characteristics of the substitute part, including 3.3V supply voltage, HCMOS/TTL output configuration, and surface mount package requirements.

Frequently Asked Questions (FAQ)

Q: Why is the ASFL-6.000MHZ-C no longer available?

A: The ASFL-6.000MHZ-C is classified as Obsolete, indicating that Abracon LLC has discontinued production. The ASFL1-6.000MHZ-EC-T represents the active product line replacement.

Q: Are the ASFL-6.000MHZ-C and ASFL1-6.000MHZ-EC-T electrically equivalent?

A: Both parts operate at 6 MHz with identical compliance certifications (ROHS3, REACH unaffected) and moisture sensitivity ratings (MSL 1). The ASFL1-6.000MHZ-EC-T provides additional specifications including 3.3V supply voltage, HCMOS/TTL output, and ±50ppm frequency stability.

Q: What is the package difference between these parts?

A: The ASFL-6.000MHZ-C package type is not specified in available documentation. The ASFL1-6.000MHZ-EC-T uses a 4-SMD, No Lead surface mount package with dimensions of 5.00mm x 3.20mm and maximum seated height of 1.30mm.

Q: Can I use ASFL1-6.000MHZ-EC-T in existing designs originally specified for ASFL-6.000MHZ-C?

A: Substitution is possible when the circuit design supports the electrical specifications of the ASFL1-6.000MHZ-EC-T, including 3.3V supply voltage and surface mount assembly. Physical board layout modifications may be required if the original design accommodated a different package type.

Q: What is the frequency stability of the substitute part?

A: The ASFL1-6.000MHZ-EC-T provides ±50ppm frequency stability across the operating temperature range of -20°C to 70°C.

Q: Are there any supply current differences?

A: The ASFL1-6.000MHZ-EC-T draws a maximum supply current of 15mA during normal operation and 10µA during disable mode. The original part specifications do not include current ratings in available documentation.