ASE22 Equivalent & Substitute Parts

Part Overview

The ASE22 is a slide switch manufactured by TE Connectivity ALCOSWITCH Switches, classified as a Double Pole Double Throw (DPDT) switch with a 300mA AC current rating at 115V. This through-hole mounted component features a shorting contact timing configuration and is designed for On-On switch function applications. The part is currently in active production status with 846 units available in inventory.

Equivalent and substitute parts are identified to provide design flexibility, ensure supply chain continuity, and accommodate varying procurement requirements while maintaining identical electrical and mechanical performance characteristics.

Substiute Parts

ASE22

TE Connectivity ALCOSWITCH SwitchesIn Stock: 939ASE22 Datasheet

Current PartRFQ

1825010-1

TE Connectivity ALCOSWITCH SwitchesIn Stock: 11741825010-1 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ASE22 is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part 1825010-1 qualifies as a direct equivalent based on the following criteria:

Electrical Parameters (Must Match Exactly):

• Circuit configuration: DPDT
• Current rating: 300mA AC
• Voltage rating: 115V AC
• Contact timing: Shorting (MBB)
• Switch function: On-On

Mechanical Parameters (Must Match Exactly):

• Mounting type: Through Hole
• Termination style: PC Pin
• Actuator length: 2.79mm
• Switch travel: 2.79mm
• Operating force: 950gf
• Mechanical life: 15,000 cycles
• Electrical life: 15,000 cycles

Material & Environmental Parameters (Must Match Exactly):

• Contact material: Copper Alloy
• Contact finish: Silver
• Actuator material: Polyamide (PA46), Nylon 4/6
• Operating temperature range: -40°C to 80°C
• RoHS compliance: ROHS3 Compliant

Both parts belong to the TE Connectivity ALCOSWITCH Switches ASE series and maintain identical performance specifications across all provided parameters.

Parameter Comparison

Engineering Selection Recommendations

Both ASE22 and 1825010-1 are active production components manufactured by TE Connectivity ALCOSWITCH Switches with full ROHS3 compliance. Selection between these parts is based on procurement and inventory considerations rather than technical performance differences.

ASE22 is appropriate for applications where the base product number ASE2 designation is specified or preferred in design documentation.

1825010-1 is appropriate for applications where the alternative base product number 1825010 designation is specified or where higher inventory availability (1102 units versus 846 units) supports supply chain requirements.

Both parts satisfy identical electrical performance requirements for DPDT switching applications at 300mA AC and 115V AC ratings. Both maintain equivalent mechanical durability with 15,000 cycle life ratings and operate across the full -40°C to 80°C temperature range. Through-hole PC pin termination and silver-plated copper alloy contacts ensure consistent signal integrity and reliability in both configurations.

Frequently Asked Questions (FAQ)

Q: Can ASE22 and 1825010-1 be used interchangeably in the same circuit?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters. They share identical DPDT circuit configuration, 300mA AC current rating, 115V AC voltage rating, contact timing, switch function, mounting type, termination style, actuator dimensions, operating force, life cycle ratings, temperature range, contact materials, and RoHS compliance status.

Q: What determines whether a part qualifies as a substitute for ASE22?

A: A substitute part must match ASE22 across all provided electrical parameters (circuit type, current rating, voltage rating, contact timing, switch function), all mechanical parameters (mounting type, termination style, actuator length, switch travel, operating force, mechanical and electrical life), all material specifications (contact material, contact finish, actuator material), and all environmental ratings (operating temperature range, RoHS compliance).

Q: Are there differences in packaging or availability between ASE22 and 1825010-1?

A: Both parts are supplied in bulk packaging. ASE22 has 846 units in current inventory, while 1825010-1 has 1102 units in current inventory. No other packaging differences are specified.

Q: Do both parts meet the same regulatory and compliance standards?

A: Yes. Both ASE22 and 1825010-1 are ROHS3 compliant. Both carry the same ECCN (EAR99) and HTSUS (8536.50.9050) classifications. The ASE22 lists REACH status as Vendor Undefined, while 1825010-1 lists REACH status as REACH Unaffected.

Q: What is the difference between the base product numbers ASE2 and 1825010?

A: The base product numbers differ between the two parts, but this distinction does not affect electrical or mechanical performance. Both parts belong to the TE Connectivity ALCOSWITCH Switches ASE series and maintain identical specifications across all functional parameters.

Q: Are the contact materials and finishes identical between both parts?

A: Yes. Both ASE22 and 1825010-1 use copper alloy contact material with silver finish and polyamide (PA46) nylon 4/6 actuator material.

Q: What is the mechanical life expectancy for both parts?

A: Both parts are rated for 15,000 mechanical cycles and 15,000 electrical cycles under specified operating conditions within the -40°C to 80°C temperature range.