ASD3K00-2-RL Equivalent & Substitute Parts

Part Overview

The ASD3K00-2-RL is a configurable switch operator manufactured by IDEC, classified as a maintained-type keylock actuator with non-illuminated design. This component functions as a switch body requiring separate contact block(s) for complete assembly. The part is currently obsolete, necessitating identification of active equivalent alternatives to support ongoing maintenance and new system designs. Substitute parts must maintain functional compatibility through matching electrical characteristics, mechanical interface dimensions, and actuator behavior.

Substiute Parts

ASD3K00-2-RL

IDECIn Stock: 1175ASD3K00-2-RL Datasheet

Current PartRFQ

ASD0306KT8G

IDECIn Stock: 829ASD0306KT8G Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ASD3K00-2-RL is determined by the following critical parameters:

• Actuator Type: Keylock (non-illuminated design)
• Switch Type: Maintained operation
• Mechanical Interface: 30.5mm round panel cutout
• Functional Requirement: Contact block(s) required for operation
• Regulatory Compliance: ROHS3 compliance maintained
• Moisture Sensitivity: MSL 1 rating

The substitute part ASD0306KT8G satisfies all substitution criteria through matching actuator type, switch operation mode, panel cutout dimension, contact block requirement, and regulatory compliance status. The transition from TWTD series (obsolete) to TWND series (active) represents a product line evolution within IDEC's configurable switch portfolio, with maintained functional equivalence across the specified parameters.

Parameter Comparison

Engineering Selection Recommendations

The ASD0306KT8G serves as the direct functional equivalent for the obsolete ASD3K00-2-RL. Selection of this substitute is supported by:

• Identical electrical and mechanical parameter alignment across all critical substitution criteria
• Active product status ensuring ongoing availability and supply chain continuity
• Maintained ROHS3 compliance and MSL 1 rating, preserving regulatory and environmental specifications
• Series transition from TWTD to TWND within IDEC's product architecture, reflecting standard product line evolution
• Equivalent panel mounting interface (30.5mm round cutout) enabling direct mechanical replacement

Frequently Asked Questions (FAQ)

Q: Can ASD0306KT8G directly replace ASD3K00-2-RL in existing assemblies?

A: Yes. Both parts share identical panel cutout dimensions (30.5mm round), actuator type (keylock), switch operation (maintained), and illumination status (non-illuminated). Contact block compatibility must be verified separately based on your specific contact block selection.

Q: What is the difference between TWTD and TWND series?

A: TWTD is the obsolete series designation for ASD3K00-2-RL. TWND is the active series designation for ASD0306KT8G. Both series maintain equivalent functional specifications for keylock, non-illuminated, maintained-type switch operators with 30.5mm panel cutout dimensions.

Q: Are there packaging differences between these parts?

A: ASD3K00-2-RL packaging is not specified in available data. ASD0306KT8G is supplied in bulk packaging. Confirm packaging requirements with your procurement process.

Q: Do both parts require contact blocks?

A: Yes. Both ASD3K00-2-RL and ASD0306KT8G require separate contact block(s) for complete functional assembly. Contact block selection is independent of the switch operator body selection.

Q: Are regulatory certifications equivalent?

A: Yes. Both parts maintain ROHS3 compliance and MSL 1 (unlimited moisture sensitivity level) ratings, ensuring equivalent regulatory and environmental performance.