Equivalent & Substitute Parts Reference: ASD3K00-1-RC

Part Overview

ASD3K00-1-RC is a configurable switch component manufactured by IDEC, classified under Configurable Switch Components. The product is supplied in bulk packaging and features a keylock actuator type with non-illuminated maintained operation. It is compatible with the IDEC TWTD series and designed for 30.5mm round panel cutouts. The device is RoHS3 compliant and has an MSL rating of 1 (unlimited), but it is listed as obsolete. Given its part status as obsolete, identifying fully compatible substitute components is necessary for continued service, repair, or new designs requiring a keylock non-illuminated maintained switch configured for the same mechanical and electrical constraints.

Substiute Parts

ASD3K00-1-RC

IDECIn Stock: 949ASD3K00-1-RC Datasheet

Current PartRFQ

ASD0302KT8D

IDECIn Stock: 1073ASD0302KT8D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitution grouping is determined strictly by matching all provided electrical and mechanical parameters relevant to configurable switch components. Key parameters governing substitute selection include actuator type (keylock), function (maintained), illumination (non-illuminated), compatible series, panel cutout dimensions (30.5mm round), and compliance (RoHS3, MSL 1). Only parts with an exact match across these fields are designated as valid substitutes.

Parameter Comparison

Engineering Selection Recommendations

The original part number ASD3K00-1-RC is obsolete. The ASD0302KT8D is active and retains all required environmental compliance certifications, including RoHS3 status and an unlimited moisture sensitivity level (MSL 1). Substitution should be strictly considered based on product life cycle status and equivalence of certifications as summarized in the table above.

Frequently Asked Questions (FAQ)

Q1: What are the main criteria for selecting a substitute part for the ASD3K00-1-RC configurable switch component?
A1: All substitute parts must match the actuator type, operation mode, illumination, compatible series, panel cutout dimensions, compliance standards, and environmental ratings as documented.

Q2: Are the series (TWTD and TWND) compatible for substitute purposes?
A2: The substitute listed, ASD0302KT8D, is compatible as it specifies both IDEC and the required panel cutout dimension, matching the original key parameters.

Q3: What packaging types are supported for direct substitution?
A3: Both the original and substitute parts are provided in bulk packaging, ensuring equivalence in mechanical handling.

Q4: What is the compliance status for available substitutes?
A4: Both the ASD3K00-1-RC and ASD0302KT8D parts are ROHS3 compliant and rated as MSL 1 (unlimited), ensuring regulatory and environmental compatibility.

Q5: Is illumination type a factor in substitution?
A5: Only non-illuminated maintained keylock mechanisms, as specified, are valid substitutes. No illuminated or momentary variants are included.

Q6: Can other actuator types or panel cutout sizes be substituted?
A6: No. Only keylock actuators with a 30.5mm round panel cutout dimension are valid substitutes per the provided parameters.