Equivalent & Substitute Parts Reference for ASD3300-2

Part Overview

Manufacturer part number ASD3300-2 from IDEC is a configurable switch component categorized as a non-illuminated selector actuator within the TWTD series. This model features a momentary action type, requires contact block(s), and is compatible with a 30.5mm round panel cutout. It is RoHS3 compliant and disposable with a Moisture Sensitivity Level (MSL) of 1 (unlimited). The part is currently classified as obsolete, which necessitates the identification of direct alternatives for ongoing designs, maintenance, or inventory replenishment.

Substiute Parts

ASD3300-2

IDECIn Stock: 971ASD3300-2 Datasheet

Current PartRFQ

ASD0339T8

IDECIn Stock: 745ASD0339T8 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute selection for ASD3300-2 is performed by matching all allowed and specified parameters, which include manufacturer (IDEC), product category (Configurable Switch Components), actuator type (Selector), action type (Momentary), illumination (Non-Illuminated), series compatibility (TWTD or alternatives with equivalent specifications), contact block requirement, panel cutout dimension (30.5mm round), RoHS compliance, and MSL rating. Substitutes only qualify if they directly match these parameters without exception.

Key parameters for substitution:

• Manufacturer
• Category
• Series compatibility
• Actuator Type
• Type (Momentary)
• Illumination (Non-Illuminated)
• Requires: Contact Block(s)
• Panel Cutout Dimensions: 30.5mm (Round)
• RoHS Status
• MSL

Parameter Comparison

Engineering Selection Recommendations

Substitute ASD0339T8 is a suitable equivalent for ASD3300-2 based on identical manufacturer, product category, actuator type, momentary action, non-illuminated configuration, contact block requirement, 30.5mm round panel cutout, RoHS3 compliance, and MSL 1 (unlimited) status. Substitution aligns with the need for an active, in-production alternative due to the obsolete status of ASD3300-2. No differing compliance or certification information is noted within the provided data.

Frequently Asked Questions (FAQ)

Q1: What determines if ASD0339T8 can replace ASD3300-2?
A1: Substitution is defined by identical manufacturer, product category, actuator type (selector), momentary action, non-illuminated status, identical panel cutout dimension (30.5mm round), contact block compatibility, and matching RoHS3 and MSL 1 compliance.

Q2: Is the panel cutout dimension critical for substitution?
A2: The specified 30.5mm round panel cutout dimension must be matched to ensure mechanical compatibility within the application.

Q3: Are both parts RoHS compliant?
A3: Both ASD3300-2 and ASD0339T8 are specified as ROHS3 compliant.

Q4: Is the substitute part available?
A4: According to the provided data, ASD0339T8 is an active status product and is listed as new original in stock.

Q5: Are there differences in required accessories?
A5: Both parts require contact block(s), as explicitly stated. No additional requirements are specified.