ASD32K00-2-RRC Equivalent & Substitute Parts

Part Overview

The ASD32K00-2-RRC is a configurable switch body component manufactured by IDEC, designed for keylock non-illuminated applications within the TWTD series. This part is classified as obsolete and requires contact block(s) for complete functionality. The component features a momentary action type with a 30.5mm round panel cutout dimension.

Due to its obsolete status, locating replacement units from original inventory may present supply chain challenges. Identifying equivalent substitute parts ensures continued availability for maintenance, repair, and new assembly applications where this component specification is required.

Substiute Parts

ASD32K00-2-RRC

IDECIn Stock: 1095ASD32K00-2-RRC Datasheet

Current PartRFQ

ASD0328KT8

IDECIn Stock: 848ASD0328KT8 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ASD32K00-2-RRC is determined by alignment of the following critical parameters:

Mandatory Matching Parameters:

• Manufacturer: IDEC
• Actuator Type: Keylock
• Illumination: Non-Illuminated
• Type: Momentary
• Panel Cutout Dimensions: 30.5mm (Round)
• Requires: Contact Block(s)
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Series Compatibility: The ASD32K00-2-RRC operates within the TWTD series. Substitute parts may operate within compatible IDEC series (such as TWND) provided all other electrical and mechanical parameters remain aligned.

The substitute part ASD0328KT8 satisfies all mandatory matching parameters and maintains full compliance with environmental and regulatory requirements.

Parameter Comparison

Engineering Selection Recommendations

ASD0328KT8 as Primary Substitute:

The ASD0328KT8 is the designated substitute for the obsolete ASD32K00-2-RRC. This substitution is valid based on the following engineering criteria:

1. Electrical Compatibility: Both parts share identical actuator type (keylock), illumination status (non-illuminated), and operational type (momentary). Contact block requirements are equivalent.

2. Mechanical Compatibility: Panel cutout dimensions are identical at 30.5mm round, ensuring direct mechanical fit in existing panel installations.

3. Regulatory Compliance: Both parts maintain ROHS3 compliance and identical MSL ratings (1 - Unlimited), confirming equivalent environmental performance and handling requirements.

4. Product Status Advantage: The ASD0328KT8 carries active product status, providing superior long-term availability compared to the obsolete ASD32K00-2-RRC.

5. Series Transition: While the substitute operates within the TWND series rather than the original TWTD series, all functional and mechanical parameters remain aligned, supporting direct substitution in applications.

Frequently Asked Questions (FAQ)

Q: Can the ASD0328KT8 directly replace the ASD32K00-2-RRC in existing installations?

A: Yes. Both parts share identical panel cutout dimensions (30.5mm round), actuator type (keylock), illumination status (non-illuminated), and operational characteristics (momentary). Direct mechanical and electrical substitution is supported.

Q: What is the significance of the series change from TWTD to TWND?

A: The series designation indicates the product line within IDEC's configurable switch portfolio. The TWND series substitute maintains all critical electrical and mechanical parameters required for functional equivalence, including actuator type, illumination, operation type, and panel cutout dimensions.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts maintain identical RoHS3 compliance status and Moisture Sensitivity Level (MSL) ratings of 1 (Unlimited). Environmental and regulatory performance is equivalent.

Q: Why is the ASD32K00-2-RRC listed as obsolete?

A: Obsolete status indicates the part is no longer in active production. The ASD0328KT8 provides functional and mechanical equivalence while maintaining active product status and current availability.

Q: Do both parts require contact blocks?

A: Yes. Both the ASD32K00-2-RRC and ASD0328KT8 require contact block(s) for complete functionality. Contact block selection should be based on the specific switching requirements of the application.

Q: What packaging format is available for the substitute part?

A: The ASD0328KT8 is supplied in bulk packaging, consistent with the original ASD32K00-2-RRC packaging format.