ASD3-24.576MHZ-EC-T3 Equivalent & Substitute Parts

Part Overview

The ASD3-24.576MHZ-EC-T3 is a 24.576 MHz XO (Standard) HCMOS Oscillator manufactured by Abracon LLC. This surface mount crystal oscillator operates at 1.8V with Enable/Disable functionality, housed in a 4-SMD, No Lead package. The part is Active status and ROHS3 compliant. Substitute parts are identified when parametric specifications match across frequency, output type, voltage supply, operating temperature range, and package configuration.

Substiute Parts

ASD3-24.576MHZ-EC-T3

Abracon LLCIn Stock: 875ASD3-24.576MHZ-EC-T3 Datasheet

Current PartRFQ

ASD3-24.576MHZ-EC-T

Abracon LLCIn Stock: 8795ASD3-24.576MHZ-EC-T Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ASD3-24.576MHZ-EC-T3 are identified based on matching the following critical parameters:

• Frequency: 24.576 MHz
• Output Type: HCMOS
• Voltage Supply: 1.8V
• Function: Enable/Disable
• Operating Temperature Range: -20°C ~ 70°C
• Frequency Stability: ±50ppm
• Package Configuration: 4-SMD, No Lead
• Physical Dimensions: 0.098" L x 0.079" W (2.50mm x 2.00mm)
• Maximum Height: 0.039" (1.00mm)
• Current Specifications: 4mA (Max Supply), 20µA (Max Disable)
• Compliance: ROHS3 Compliant

The ASD3-24.576MHZ-EC-T variant differs only in packaging format (Tape & Reel vs. standard packaging), maintaining identical electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the ASD3-24.576MHZ-EC-T3 and ASD3-24.576MHZ-EC-T are Active status products from Abracon LLC with identical electrical and mechanical specifications. Selection between these parts depends on procurement and assembly requirements. The ASD3-24.576MHZ-EC-T3 is supplied in standard packaging, while the ASD3-24.576MHZ-EC-T is supplied in Tape & Reel format. Both parts maintain ROHS3 compliance and are suitable for applications requiring 24.576 MHz HCMOS oscillators with 1.8V supply and Enable/Disable control.

Frequently Asked Questions (FAQ)

Q: Can ASD3-24.576MHZ-EC-T replace ASD3-24.576MHZ-EC-T3 in production?

A: Yes. Both parts are electrically and mechanically identical. The difference is packaging format only. ASD3-24.576MHZ-EC-T uses Tape & Reel packaging, while ASD3-24.576MHZ-EC-T3 uses standard packaging. Substitution is valid for applications where packaging format does not constrain assembly processes.

Q: What are the critical parameters for substitution?

A: Frequency (24.576 MHz), output type (HCMOS), supply voltage (1.8V), Enable/Disable function, operating temperature range (-20°C ~ 70°C), frequency stability (±50ppm), and package configuration (4-SMD, No Lead) must remain constant.

Q: Are there any compliance differences between the substitute parts?

A: No. Both parts are ROHS3 compliant and carry identical regulatory certifications (REACH Unaffected, ECCN EAR99, HTSUS 8542.39.0001).

Q: What is the physical footprint compatibility?

A: Both parts use identical 4-SMD, No Lead packages with dimensions of 0.098" L x 0.079" W (2.50mm x 2.00mm) and maximum seated height of 0.039" (1.00mm). PCB layout and assembly tooling are interchangeable.

Q: How do current specifications compare?

A: Maximum supply current is 4mA for both parts. Maximum disable current is 20µA for both parts. Power consumption characteristics are identical.