Equivalent & Substitute Parts for IDEC ASD3100-2 Configurable Switch Component

Part Overview

The IDEC ASD3100-2 is a configurable switch body selector (non-illuminated) defined for use within the "Configurable Switch Components" category. It is manufactured by IDEC, part of the TWTD series, and is characterized by a momentary, non-illuminated selector actuator. The ASD3100-2 has been designated as "Obsolete," necessitating the selection of alternative or equivalent models with matching electrical and mechanical parameters for continued design support and inventory continuity.

Substiute Parts

ASD3100-2

IDECIn Stock: 911ASD3100-2 Datasheet

Current PartRFQ

ASD0310T8

IDECIn Stock: 901ASD0310T8 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are identified based on strict equivalence across the following parameters: manufacturer, category, series compatibility, packaging type, actuator type (selector), operation type (momentary), illumination (non-illuminated), panel cutout dimensions (30.5mm round), and compliance status (RoHS, MSL). All substitute parts listed are required to match these parameters for assured functional and mechanical interchangeability within the IDEC configurable switch components category.

Parameter Comparison

Engineering Selection Recommendations

Selection between ASD3100-2 and ASD0310T8 should be based on product status and compliance. ASD3100-2 is marked as obsolete, while ASD0310T8 is indicated as active. Both parts are RoHS3 compliant and meet Moisture Sensitivity Level 1 (unlimited), supporting standard inventory and handling requirements.

Frequently Asked Questions (FAQ)

Q1: What key parameters govern interchangeability for IDEC configurable switch body selectors?
A1: Interchangeability is governed by manufacturer, category, series compatibility, packaging, actuator type, operation type, illumination option, panel cutout dimensions, and regulatory compliance (RoHS, MSL).

Q2: Can ASD0310T8 directly replace ASD3100-2 in the same panel configuration?
A2: Based on matching actuator type, operation, illumination, compatible panel cutout, and regulatory status, ASD0310T8 matches all specified criteria for substitution.

Q3: Are there any differences in compliance or moisture sensitivity between ASD3100-2 and ASD0310T8?
A3: Both parts are RoHS3 compliant and have Moisture Sensitivity Level 1 (unlimited).

Q4: Does the packaging impact substitution?
A4: Both ASD3100-2 and ASD0310T8 are provided in bulk packaging, ensuring consistency in assembly and inventory management.

Q5: Is there a change in series compatibility to consider?
A5: ASD3100-2 is from the TWTD series, while ASD0310T8 is from the TWND series; both are part of the IDEC product family and are compatible with specified series as listed.