ASD2K00-RR Equivalent & Substitute Parts

Part Overview

The ASD2K00-RR is a configurable switch operator manufactured by IDEC, designed as a maintained-type keylock actuator for the TWTD series. This component functions as a switch body accessory requiring compatible contact blocks for complete assembly. The ASD2K00-RR is classified as obsolete, making identification of active equivalent parts essential for ongoing system maintenance and new installations.

Substiute Parts

ASD2K00-RR

IDECIn Stock: 866ASD2K00-RR Datasheet

Current PartRFQ

ASD0201KT8C

IDECIn Stock: 656ASD0201KT8C Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ASD2K00-RR is determined by strict alignment of the following parameters:

• Actuator Type: Keylock (non-illuminated operation)
• Switch Type: Maintained action
• Panel Cutout Dimensions: 30.5mm round opening
• Manufacturer Compatibility: IDEC
• RoHS Compliance: ROHS3 Compliant
• Moisture Sensitivity Level: MSL 1

The substitute part ASD0201KT8C meets all critical substitution criteria. While it belongs to the TWND series rather than TWTD, both series share identical mechanical and electrical interface specifications for keylock-type maintained switch operators with 30.5mm round panel cutouts.

Parameter Comparison

Engineering Selection Recommendations

The ASD0201KT8C is the designated substitute for the obsolete ASD2K00-RR. Selection is based on:

• Product Status Alignment: ASD0201KT8C maintains active product status, ensuring continued availability and supply chain reliability.
• Regulatory Compliance: Both parts maintain ROHS3 compliance, satisfying environmental and regulatory requirements.
• Mechanical Compatibility: Identical 30.5mm round panel cutout dimensions ensure direct mechanical fit without panel modification.
• Functional Equivalence: Both parts provide maintained keylock actuation with non-illuminated operation and identical moisture sensitivity ratings.
• Manufacturer Consistency: Both components are manufactured by IDEC, maintaining design and quality standards.

Frequently Asked Questions (FAQ)

Q: Can ASD0201KT8C directly replace ASD2K00-RR in existing installations?

A: Yes. Both parts share identical mechanical interface dimensions (30.5mm round cutout), actuator type (keylock), operation type (maintained), and electrical characteristics (non-illuminated). The series designation change from TWTD to TWND does not affect compatibility when mechanical and functional parameters are identical.

Q: What contact blocks are compatible with ASD0201KT8C?

A: The ASD0201KT8C requires compatible contact blocks as specified in IDEC documentation for the TWND series. Verify contact block part numbers against the TWND series compatibility matrix.

Q: Are there packaging differences between the main part and substitute?

A: The ASD2K00-RR was supplied in standard packaging, while ASD0201KT8C is supplied in bulk packaging. This does not affect component functionality or performance.

Q: Does the series change from TWTD to TWND affect system performance?

A: No. The series designation reflects product line organization. Both TWTD and TWND series maintain identical specifications for keylock-type maintained switch operators with 30.5mm round panel cutouts.

Q: Are both parts RoHS compliant?

A: Yes. Both ASD2K00-RR and ASD0201KT8C are ROHS3 compliant, meeting environmental and regulatory standards.