ASD1-50.000MHZ-EC-T3 Equivalent & Substitute Parts

Part Overview

The ASD1-50.000MHZ-EC-T3 is a 50 MHz XO (Standard) HCMOS oscillator manufactured by Abracon LLC. This surface mount crystal oscillator operates at 3V with enable/disable functionality, designed for applications requiring stable 50 MHz frequency generation. The part is Active status and ROHS3 compliant. Substitute parts are identified when inventory constraints, packaging preferences, or supply chain requirements necessitate alternative sourcing while maintaining electrical and mechanical compatibility.

Substiute Parts

ASD1-50.000MHZ-EC-T3

Abracon LLCIn Stock: 869ASD1-50.000MHZ-EC-T3 Datasheet

Current PartRFQ

ASD1-50.000MHZ-EC-T

Abracon LLCIn Stock: 1237ASD1-50.000MHZ-EC-T Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The ASD1-50.000MHZ-EC-T3 has one identified parametric equivalent: ASD1-50.000MHZ-EC-T. Substitution is valid based on the following criteria:

• Identical frequency: 50 MHz
• Identical output type: HCMOS
• Identical supply voltage: 3V
• Identical frequency stability: ±50ppm
• Identical operating temperature range: -20°C ~ 70°C
• Identical maximum supply current: 12mA
• Identical disable mode current: 20µA
• Identical package type: 4-SMD, No Lead
• Identical physical dimensions: 2.50mm x 2.00mm x 1.00mm
• Identical mounting type: Surface Mount
• Identical RoHS compliance: ROHS3 Compliant

The only difference between the main part and substitute is packaging format: the main part uses standard packaging while the substitute is supplied in Cut Tape (CT) format.

Parameter Comparison

Engineering Selection Recommendations

Both ASD1-50.000MHZ-EC-T3 and ASD1-50.000MHZ-EC-T are Active status products from Abracon LLC with identical electrical and mechanical specifications. Selection between these parts is determined by packaging and supply requirements:

• ASD1-50.000MHZ-EC-T3 is suitable for standard packaging applications with 795 units currently in stock.
• ASD1-50.000MHZ-EC-T is suitable for applications requiring Cut Tape format with 1145 units currently in stock.

Both parts maintain ROHS3 compliance and REACH Unaffected status, meeting regulatory requirements for industrial and commercial applications. The identical electrical parameters ensure direct functional interchangeability in circuit designs.

Frequently Asked Questions (FAQ)

Q: Can ASD1-50.000MHZ-EC-T replace ASD1-50.000MHZ-EC-T3 in my design?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format. If your assembly process accommodates Cut Tape (CT) format, ASD1-50.000MHZ-EC-T is a direct substitute.

Q: What is the difference between standard packaging and Cut Tape (CT) format?

A: Standard packaging and Cut Tape format differ in how components are supplied for assembly. Cut Tape format is typically used for automated pick-and-place equipment. Verify your assembly equipment compatibility before selecting Cut Tape format.

Q: Are both parts RoHS compliant?

A: Yes. Both ASD1-50.000MHZ-EC-T3 and ASD1-50.000MHZ-EC-T are ROHS3 compliant and REACH Unaffected.

Q: Do these oscillators require any special handling?

A: Both parts have Moisture Sensitivity Level listed as Not Applicable, indicating standard handling procedures are sufficient.

Q: What is the frequency stability specification?

A: Both parts maintain ±50ppm frequency stability across the operating temperature range of -20°C to 70°C.