ASD1-48.000MHZ-EC-T3 Equivalent & Substitute Parts

Part Overview

The ASD1-48.000MHZ-EC-T3 is a 48 MHz XO (Standard) HCMOS oscillator manufactured by Abracon LLC. This surface mount crystal oscillator operates at 3V with enable/disable functionality, housed in a 4-SMD, No Lead package. The device is classified as Active product status with ROHS3 compliance and REACH unaffected designation. Substitute parts are identified when packaging or inventory requirements necessitate alternative sourcing while maintaining identical electrical and mechanical specifications.

Substiute Parts

ASD1-48.000MHZ-EC-T3

Abracon LLCIn Stock: 753ASD1-48.000MHZ-EC-T3 Datasheet

Current PartRFQ

ASD1-48.000MHZ-EC-T

Abracon LLCIn Stock: 1054ASD1-48.000MHZ-EC-T Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The ASD1-48.000MHZ-EC-T3 has one identified parametric equivalent: ASD1-48.000MHZ-EC-T. Substitution eligibility is determined by the following critical parameters:

• Frequency: 48 MHz (exact match required)
• Output Configuration: HCMOS (exact match required)
• Supply Voltage: 3V (exact match required)
• Frequency Stability: ±50ppm (exact match required)
• Operating Temperature Range: -20°C ~ 70°C (exact match required)
• Package Type: 4-SMD, No Lead (exact match required)
• Physical Dimensions: 2.50mm x 2.00mm x 1.00mm (exact match required)
• Compliance: ROHS3 Compliant, REACH Unaffected (exact match required)

The substitute part differs only in packaging configuration (Tape & Reel vs. standard packaging), which does not affect electrical or mechanical performance in the application circuit.

Parameter Comparison

Engineering Selection Recommendations

Both ASD1-48.000MHZ-EC-T3 and ASD1-48.000MHZ-EC-T are Active status products from Abracon LLC with identical electrical specifications and mechanical form factors. Selection between these parts should be based on procurement and assembly requirements:

• ASD1-48.000MHZ-EC-T3 is suitable for standard packaging applications with lower volume requirements.
• ASD1-48.000MHZ-EC-T in Tape & Reel packaging is optimized for high-volume automated assembly processes.

Both parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory compatibility across applications. No functional differences exist between these parts in circuit operation.

Frequently Asked Questions (FAQ)

Q: Can ASD1-48.000MHZ-EC-T be used as a direct replacement for ASD1-48.000MHZ-EC-T3?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Tape & Reel vs. standard). Circuit performance and PCB footprint compatibility are identical.

Q: Does packaging format affect circuit performance?

A: No. Packaging format (Tape & Reel or standard) does not affect electrical characteristics, frequency stability, output type, or operating parameters. The component itself is identical.

Q: Are there any compliance differences between these parts?

A: No. Both parts carry identical ROHS3 compliance and REACH unaffected status. Regulatory requirements are met by either part.

Q: Which part should be selected for high-volume production?

A: ASD1-48.000MHZ-EC-T in Tape & Reel packaging is recommended for high-volume automated assembly due to packaging efficiency and handling compatibility with pick-and-place equipment.

Q: What are the critical parameters that must match for substitution?

A: Frequency (48 MHz), output type (HCMOS), supply voltage (3V), frequency stability (±50ppm), operating temperature range (-20°C ~ 70°C), package type (4-SMD, No Lead), and physical dimensions (2.50mm x 2.00mm x 1.00mm) must all match exactly for functional equivalence.