ARTIK-030-AV1R 802.15.4 RF Transceiver Module Equivalent & Substitute Parts

Part Overview

The ARTIK-030-AV1R is a 2.4GHz 802.15.4 RF transceiver module manufactured by Samsung Semiconductor, Inc., designed for wireless communication applications requiring IEEE 802.15.4 protocol compliance. This surface mount chip integrates a complete transceiver with embedded antenna, supporting data rates of 250kbps with integrated memory and multiple serial interfaces.

The ARTIK-030-AV1R is classified as obsolete. Identification of equivalent and substitute components is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for systems utilizing this module.

Key Parameters

Parameter	Value
RF Standard	802.15.4
Frequency Band	2.4GHz
Data Rate	250kbps
Output Power	10dBm
Receiver Sensitivity	-99dBm
Serial Interfaces	I2C, I2S, SPI, UART
Antenna Configuration	Integrated, Chip
Memory	256kB Flash, 32kB SRAM
Supply Voltage	1.85V ~ 3.8V
Receive Current	9.8mA
Transmit Current	8.2mA
Mounting Type	Surface Mount
Operating Temperature	-40°C ~ 85°C
Moisture Sensitivity Level	3 (168 Hours)

Substitute Part Grouping Explanation

Substitution of the ARTIK-030-AV1R is determined by strict equivalence across the following critical parameters:

RF and Protocol Compliance: The substitute must operate on the 802.15.4 standard at 2.4GHz frequency band with identical data rate of 250kbps.

Electrical Performance: Output power, receiver sensitivity, supply voltage range, and current consumption must match or remain within the specified tolerances to ensure functional compatibility in existing circuit designs.

Interface Compatibility: Serial communication interfaces (I2C, I2S, SPI, UART) must be present to maintain compatibility with host processor connections.

Memory Configuration: Flash and SRAM sizes must be equivalent to support existing firmware and application requirements.

Physical and Environmental Specifications: Mounting type, operating temperature range, and moisture sensitivity level must align with the original design constraints.

The MGM111A256V1R from Silicon Labs meets all substitution criteria for the ARTIK-030-AV1R.

Parameter Comparison

Parameter	ARTIK-030-AV1R (Samsung)	MGM111A256V1R (Silicon Labs)	Match Status
RF Standard	802.15.4	802.15.4	Equivalent
Frequency Band	2.4GHz	2.4GHz	Equivalent
Data Rate	250kbps	250kbps	Equivalent
Output Power	10dBm	10dBm	Equivalent
Receiver Sensitivity	-99dBm	-99dBm	Equivalent
Serial Interfaces	I2C, I2S, SPI, UART	I2C, I2S, SPI, UART	Equivalent
Antenna Type	Integrated, Chip	Integrated, Chip	Equivalent
Memory	256kB Flash, 32kB SRAM	256kB Flash, 32kB SRAM	Equivalent
Supply Voltage	1.85V ~ 3.8V	1.85V ~ 3.8V	Equivalent
Receive Current	9.8mA	9.8mA	Equivalent
Transmit Current	8.2mA	8.2mA	Equivalent
Mounting Type	Surface Mount	Surface Mount	Equivalent
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	Equivalent
Moisture Sensitivity Level	3 (168 Hours)	3 (168 Hours)	Equivalent

Engineering Selection Recommendations

The MGM111A256V1R is a direct functional equivalent to the ARTIK-030-AV1R across all specified electrical, RF, and environmental parameters. The substitute component is manufactured by Silicon Labs and carries an Active product status, ensuring ongoing availability and support.

Both components share identical RF performance characteristics, memory configuration, power consumption profiles, and interface specifications. The MGM111A256V1R is packaged in Tape & Reel format, compared to the Strip packaging of the original part; this represents a packaging difference only and does not affect functional compatibility.

Compliance certifications (ECCN and HTSUS codes) differ between the two components due to manufacturer-specific regulatory classifications. Design teams should verify compliance requirements with their respective regulatory and procurement departments.

Frequently Asked Questions (FAQ)

Q: Can the MGM111A256V1R directly replace the ARTIK-030-AV1R in existing designs?

A: Yes. The MGM111A256V1R meets all electrical, RF, and interface specifications of the ARTIK-030-AV1R. No circuit modifications are required for functional substitution.

Q: What is the difference between Strip and Tape & Reel packaging?

A: Strip packaging supplies components in loose strips, while Tape & Reel packaging provides components wound on continuous tape for automated assembly. Both formats contain identical components; the difference is in handling and assembly process compatibility.

Q: Are the serial interfaces identical between both parts?

A: Yes. Both the ARTIK-030-AV1R and MGM111A256V1R support I2C, I2S, SPI, and UART interfaces with equivalent electrical specifications.

Q: Is firmware compatibility guaranteed?

A: Both components feature identical memory sizes (256kB Flash, 32kB SRAM) and support the same 802.15.4 protocol. Firmware compatibility depends on manufacturer-specific implementation details not provided in the electrical specifications.

Q: What is the product status difference between these parts?

A: The ARTIK-030-AV1R is classified as Obsolete, while the MGM111A256V1R is Active. The Active status of the substitute ensures continued manufacturing and supply availability.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message