ARR06D104KGS Equivalent & Substitute Parts

Part Overview

The ARR06D104KGS is a 0.1 µF ceramic capacitor rated at 100V with X7R temperature coefficient, manufactured by KEMET in radial through-hole configuration. This component is classified as Active product status with 815 units in current inventory. The ARR series operates across an extended temperature range of -55°C to 200°C, making it suitable for high-temperature applications. Substitute parts are identified based on matching electrical specifications (capacitance, voltage rating, tolerance) and mechanical compatibility (radial package, lead spacing, mounting type), while accounting for differences in temperature coefficient classification and reliability ratings.

Substiute Parts

ARR06D104KGS

KEMETIn Stock: 882ARR06D104KGS Datasheet

Current PartRFQ

M39014/02-1230

KEMETIn Stock: 1301M39014/02-1230 Datasheet

DirectRFQ

M39014/02-1310

KYOCERA AVXIn Stock: 1404M39014/02-1310 Datasheet

DirectRFQ

M39014/02-1310V

KYOCERA AVXIn Stock: 1512M39014/02-1310V Datasheet

DirectRFQ

M39014/02-1350

KEMETIn Stock: 1495M39014/02-1350 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Electrical Compatibility Requirements:

• Capacitance: 0.1 µF (exact match required)
• Voltage Rating: 100V (exact match required)
• Tolerance: ±10% (exact match required)

Mechanical Compatibility Requirements:

• Mounting Type: Through Hole (exact match required)
• Package Type: Radial (exact match required)
• Lead Spacing: 0.200" (5.08mm) (exact match required)
• Lead Style: Straight (exact match required)

Allowable Variations:

• Temperature Coefficient: X7R (main part) to BX (substitute parts) — BX coefficient provides narrower temperature stability (-55°C to 125°C) compared to X7R (-55°C to 200°C)
• Failure Rate: Varies across substitute options (M, R, S ratings)
• Packaging Format: Bulk or Bag configurations are interchangeable for component selection

All substitute parts listed maintain identical electrical performance at rated conditions and are mechanically compatible with the ARR06D104KGS footprint.

Parameter Comparison

Engineering Selection Recommendations

Temperature Operating Range Consideration: The ARR06D104KGS operates to 200°C due to its X7R temperature coefficient. All substitute parts (M39014/02 series) feature BX temperature coefficient with maximum operating temperature of 125°C. Selection of substitute parts is appropriate only for applications where the operating temperature does not exceed 125°C.

Reliability and Failure Rate: Substitute parts are classified under MIL-PRF-39014 military specification with defined failure rates:

• M39014/02-1230: Failure Rate M (1%)
• M39014/02-1310: Failure Rate R (0.01%)
• M39014/02-1310V: Failure Rate R (0.01%)
• M39014/02-1350: Failure Rate S (0.001%)

Higher reliability grades (R and S) are suitable for applications requiring enhanced component dependability.

Compliance Status: All parts are RoHS non-compliant and REACH Affected or Unaffected as specified. M39014/02-1310 and M39014/02-1310V carry REACH Unaffected status, while M39014/02-1230 and M39014/02-1350 are REACH Affected.

Inventory Availability: Current stock levels: ARR06D104KGS (815 units), M39014/02-1230 (1281 units), M39014/02-1310 (1310 units), M39014/02-1310V (1466 units), M39014/02-1350 (1442 units).

Frequently Asked Questions (FAQ)

Q: Can M39014/02 series parts directly replace ARR06D104KGS in all applications?

A: Direct replacement is valid only for applications operating at or below 125°C. The ARR06D104KGS X7R coefficient supports operation to 200°C, while M39014/02 series BX coefficient is limited to 125°C. Verify application temperature requirements before substitution.

Q: What is the difference between M39014/02-1310 and M39014/02-1310V?

A: Both parts are electrically and mechanically identical with identical failure rate R (0.01%). The primary difference is REACH compliance status: M39014/02-1310 is REACH Unaffected, while M39014/02-1310V is also REACH Unaffected. Both are manufactured by KYOCERA AVX. Selection between these parts depends on supply chain and regulatory requirements.

Q: How do failure rates affect component selection?

A: Failure rate classifications (M, R, S) indicate expected defect rates per 1000 hours of operation under specified conditions. M39014/02-1350 with S rating (0.001%) provides the lowest failure rate, suitable for critical applications. M39014/02-1310 and M39014/02-1310V with R rating (0.01%) provide intermediate reliability. M39014/02-1230 with M rating (1%) is suitable for general-purpose applications with less stringent reliability requirements.

Q: Are packaging differences (Bulk vs. Bag) significant for substitution?

A: Packaging format (Bulk or Bag) does not affect electrical or mechanical performance. Selection between packaging types is based on procurement, handling, and inventory management requirements only.

Q: What are the physical dimension differences between the main part and substitutes?

A: ARR06D104KGS dimensions are 0.300" L x 0.100" W with 0.300" seated height. M39014/02 series dimensions are 0.290" L x 0.090" W with 0.200" to 0.300" seated height. These minor dimensional variations remain within standard PCB footprint tolerances for radial through-hole components with 0.200" lead spacing.

Q: Is the ARR06D104KGS suitable for high-temperature applications above 125°C?

A: Yes. The ARR06D104KGS X7R temperature coefficient supports continuous operation from -55°C to 200°C. M39014/02 series substitutes are limited to -55°C to 125°C and are not suitable for applications exceeding 125°C.