ARJM11D7-130-AB-CW2 Equivalent & Substitute Parts

Part Overview

The ARJM11D7-130-AB-CW2 is a 1 Port RJ45 Through Hole modular connector manufactured by Abracon LLC, designed for 10/100 Base-T Ethernet applications with AutoMDIX and Power over Ethernet (PoE) support. This connector features a 90° right-angle orientation, solder termination, and integrated LED indicators (Green-Yellow). The part is currently classified as Obsolete, necessitating identification of active equivalent alternatives to maintain design continuity and ensure supply chain availability.

Substiute Parts

ARJM11D7-130-AB-CW2

Abracon LLCIn Stock: 1081ARJM11D7-130-AB-CW2 Datasheet

Current PartRFQ

ARJM11D7-114-AB-CW2

Abracon LLCIn Stock: 993ARJM11D7-114-AB-CW2 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ARJM11D7-130-AB-CW2 is determined by strict equivalence across the following critical parameters:

• Connector Type & Port Configuration: RJ45, single port
• Mechanical Compatibility: Through hole mounting, 90° right-angle orientation, 0.543" (13.80mm) height above board, solder termination
• Electrical & Functional Specifications: 10/100 Base-T, AutoMDIX, Power over Ethernet (PoE) support, 4 cores per jack, shielded construction
• Physical Features: Board lock, up tab direction, green-yellow LED indicators
• Material & Compliance: Gold contact finish, ROHS3 compliance, MSL 1 rating

The ARJM11D7-114-AB-CW2 meets all these criteria and is classified as Active, making it a direct functional equivalent.

Parameter Comparison

Engineering Selection Recommendations

The ARJM11D7-114-AB-CW2 is the recommended substitute for the obsolete ARJM11D7-130-AB-CW2. Both parts are manufactured by Abracon LLC within the same ARJM11 series and maintain identical electrical, mechanical, and environmental specifications. The substitute part is currently in Active product status, ensuring ongoing availability and supply chain support. Both parts satisfy ROHS3 compliance and REACH unaffected requirements, with equivalent MSL 1 ratings suitable for unlimited moisture exposure conditions. The transition from the obsolete to the active part number presents no functional or compliance compromises for 10/100 Base-T Ethernet applications with PoE support.

Frequently Asked Questions (FAQ)

Q: Can the ARJM11D7-114-AB-CW2 be used as a direct replacement for the ARJM11D7-130-AB-CW2?

A: Yes. Both connectors are electrically and mechanically identical across all specified parameters, including connector type, port configuration, mounting method, orientation, termination, physical dimensions, LED indicators, shielding, and operating temperature range. The substitute part is the manufacturer-recommended equivalent.

Q: What is the primary reason for substitution?

A: The ARJM11D7-130-AB-CW2 is classified as Obsolete. The ARJM11D7-114-AB-CW2 is an Active part number that provides identical functionality while ensuring continued supply availability.

Q: Are there any compliance or certification differences between the two parts?

A: No. Both parts maintain identical ROHS3 compliance, REACH unaffected status, MSL 1 rating, and EAR99 ECCN classification.

Q: Will PCB layout or footprint require modification?

A: No. Both parts share identical mechanical specifications: 90° right-angle orientation, 0.543" (13.80mm) height above board, through-hole solder termination, and board lock features. PCB design remains unchanged.

Q: Are the LED indicators identical?

A: Yes. Both parts feature Green-Yellow LED indicators with identical functional behavior for 10/100 Base-T status indication.

Q: What is the operating temperature range for both parts?

A: Both parts operate within the range of 0°C to 70°C.