ARJM11D7-007-AB-CW4 Equivalent & Substitute Parts

Part Overview

The ARJM11D7-007-AB-CW4 is a 1 Port RJ45 Through Hole 10/100 Base-T connector with AutoMDIX functionality, manufactured by Abracon LLC. This component is classified as Obsolete, indicating discontinued production. The part features a 90° right-angle orientation, solder termination, and integrated board lock mechanism suitable for PCB-mounted network applications. Due to its obsolete status, identifying functionally equivalent active production alternatives is essential for design continuity and supply chain management.

Substiute Parts

ARJM11D7-007-AB-CW4

Abracon LLCIn Stock: 792ARJM11D7-007-AB-CW4 Datasheet

Current PartRFQ

ARJM11D7-009-AB-CW2

Abracon LLCIn Stock: 869ARJM11D7-009-AB-CW2 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ARJM11D7-007-AB-CW4 is determined by strict alignment of the following critical parameters:

• Connector Type: RJ45
• Number of Ports: 1
• Mounting Type: Through Hole
• Orientation: 90° Angle (Right)
• Height Above Board: 0.543" (13.80mm)
• Termination: Solder
• Applications: 10/100 Base-T, AutoMDIX
• Shielding: Shielded
• Features: Board Lock
• Operating Temperature Range: 0°C ~ 70°C
• RoHS Compliance: ROHS3 Compliant

The ARJM11D7-009-AB-CW2 meets all substitution criteria as an active production equivalent within the ARJM11 series, maintaining identical mechanical, electrical, and environmental specifications.

Parameter Comparison

Engineering Selection Recommendations

The ARJM11D7-009-AB-CW2 is the qualified substitute for the obsolete ARJM11D7-007-AB-CW4. Both components maintain identical mechanical footprints, electrical performance characteristics, and environmental compliance ratings. The substitute part is in active production status with confirmed inventory availability (835 Pcs), ensuring supply chain continuity. Both parts satisfy ROHS3 compliance and REACH unaffected status, meeting regulatory requirements for current manufacturing standards. The transition from the obsolete to active part number presents no functional or compliance barriers for direct substitution in existing designs.

Frequently Asked Questions (FAQ)

Q: Can the ARJM11D7-009-AB-CW2 be used as a direct replacement for the ARJM11D7-007-AB-CW4?

A: Yes. Both parts share identical mechanical dimensions (0.543" height), connector type (RJ45), mounting configuration (Through Hole, 90° right angle), and electrical specifications (10/100 Base-T, AutoMDIX). No PCB layout modifications are required.

Q: What is the difference between these two part numbers?

A: The primary difference is product status. The ARJM11D7-007-AB-CW4 is obsolete, while the ARJM11D7-009-AB-CW2 is in active production. Additionally, the contact finish thickness differs (30.0µin versus 6.00µin), though both maintain gold plating and equivalent electrical performance.

Q: Are there any compliance or certification differences?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and carry identical MSL ratings (1 - Unlimited). Regulatory requirements are satisfied equally by both components.

Q: What is the inventory status of the substitute part?

A: The ARJM11D7-009-AB-CW2 has 835 Pcs of new original stock available, ensuring immediate procurement capability.

Q: Will this substitution require design changes?

A: No design changes are necessary. The substitute part maintains the same footprint, orientation, and electrical interface as the original component.