ARJM11C7-130-AB-CW2 Equivalent & Substitute Parts

Part Overview

The ARJM11C7-130-AB-CW2 is a 1 Port RJ45 Through Hole modular connector manufactured by Abracon LLC, designed for 10/100 Base-T Ethernet applications with AutoMDIX and Power over Ethernet (PoE) support. The connector features a 90° right-angle orientation, solder termination, and integrated EMI shielding with board lock functionality.

This part is currently listed as Obsolete. Identifying equivalent substitute parts ensures design continuity and maintains supply chain reliability for applications requiring identical electrical and mechanical specifications.

Substiute Parts

ARJM11C7-130-AB-CW2

Abracon LLCIn Stock: 1103ARJM11C7-130-AB-CW2 Datasheet

Current PartRFQ

ARJM11C7-104-AB-CW2

Abracon LLCIn Stock: 803ARJM11C7-104-AB-CW2 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ARJM11C7-130-AB-CW2 is determined by strict equivalence across the following critical parameters:

• Connector Type & Port Configuration: RJ45, single port
• Mechanical Compatibility: Through hole mounting, 90° right-angle orientation, 0.543" (13.80mm) height above board
• Electrical Performance: 10/100 Base-T, AutoMDIX, Power over Ethernet (PoE) support
• Signal Integrity: Shielded construction with EMI finger protection
• Termination Method: Solder termination
• Environmental Compliance: ROHS3 Compliant, MSL 1, REACH Unaffected

The ARJM11C7-104-AB-CW2 meets all specified parameters and qualifies as a direct substitute. The primary distinction is product status: the substitute part is Active, whereas the original part is Obsolete.

Parameter Comparison

Engineering Selection Recommendations

The ARJM11C7-104-AB-CW2 is the manufacturer-recommended substitute for the obsolete ARJM11C7-130-AB-CW2. Both parts maintain identical electrical and mechanical specifications, ensuring direct compatibility in existing designs.

Selection should prioritize the ARJM11C7-104-AB-CW2 due to its Active product status, which guarantees ongoing availability and manufacturer support. Both parts satisfy ROHS3 compliance and REACH requirements, making either suitable for regulated applications.

Frequently Asked Questions (FAQ)

Q: Can the ARJM11C7-104-AB-CW2 be used as a direct replacement for the ARJM11C7-130-AB-CW2?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters, including connector type, port configuration, mounting method, orientation, height, termination, shielding, and operating temperature range.

Q: What is the primary reason to substitute the ARJM11C7-130-AB-CW2?

A: The original part is Obsolete. The ARJM11C7-104-AB-CW2 is an Active product from the same manufacturer and series, ensuring continued supply availability and manufacturer support.

Q: Are there any differences in PCB layout or footprint requirements?

A: No differences are specified in the provided parameters. Both parts share identical mounting type, orientation, and height above board specifications.

Q: Do both parts support Power over Ethernet (PoE)?

A: Yes. Both the ARJM11C7-130-AB-CW2 and ARJM11C7-104-AB-CW2 support Power over Ethernet (PoE) applications with 10/100 Base-T and AutoMDIX functionality.

Q: Are there compliance or environmental differences between the two parts?

A: No. Both parts are ROHS3 Compliant, REACH Unaffected, and rated for MSL 1 (Unlimited moisture sensitivity level). Operating temperature ranges are identical at 0°C ~ 70°C.