ARJM11B1-007-AB-EW2 Equivalent & Substitute Parts

Part Overview

The ARJM11B1-007-AB-EW2 is a 1 Port RJ45 Through Hole 10/100 Base-T connector with AutoMDIX functionality, manufactured by Abracon LLC. This modular connector features a 90° right angle orientation, solder termination, and integrated LED indicators (Green-Yellow). The part is currently classified as Obsolete, necessitating identification of active equivalent alternatives to maintain design continuity and ensure supply chain availability for new production and field replacements.

Substiute Parts

ARJM11B1-007-AB-EW2

Abracon LLCIn Stock: 785ARJM11B1-007-AB-EW2 Datasheet

Current PartRFQ

ARJM11B1-009-AB-EW2

Abracon LLCIn Stock: 2349ARJM11B1-009-AB-EW2 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ARJM11B1-007-AB-EW2 is determined by strict equivalence across the following critical parameters:

Connector Type (RJ45), Number of Ports (1), Mounting Type (Through Hole), Orientation (90° Angle Right), Height Above Board (0.535"), Termination (Solder), LED Color (Green-Yellow), Shielding (Shielded), Features (Board Lock), Operating Temperature Range (-40°C ~ 85°C), Contact Finish (Gold), and RoHS Compliance (ROHS3).

The substitute part ARJM11B1-009-AB-EW2 maintains identical electrical and mechanical specifications across all these parameters. The primary distinction is product status: the substitute is Active, ensuring ongoing availability and manufacturing support.

Parameter Comparison

Engineering Selection Recommendations

The ARJM11B1-009-AB-EW2 is the direct equivalent substitute for the ARJM11B1-007-AB-EW2. Both parts are manufactured by Abracon LLC within the ARJM11 series and maintain identical electrical and mechanical specifications. The substitute part is classified as Active, providing assured long-term availability and manufacturing support.

Both parts satisfy ROHS3 compliance, REACH unaffected status, and EAR99 export classification. The substitute is supplied in Tray packaging, which is standard for production quantities. Selection of the substitute part eliminates obsolescence risk while maintaining full functional and physical compatibility with existing PCB designs.

Frequently Asked Questions (FAQ)

Q: Are the ARJM11B1-007-AB-EW2 and ARJM11B1-009-AB-EW2 electrically identical?

A: Yes. Both parts are RJ45 connectors with identical pin configurations, 10/100 Base-T AutoMDIX support, shielding, and contact specifications. They are electrically interchangeable.

Q: Will the substitute part fit the same PCB footprint?

A: Yes. Both parts share identical mounting type (Through Hole), orientation (90° Right Angle), and height above board (0.535" / 14.69mm). PCB layout modifications are not required.

Q: What is the difference between these two part numbers?

A: The primary difference is product status. The ARJM11B1-007-AB-EW2 is Obsolete, while the ARJM11B1-009-AB-EW2 is Active. The substitute part is supplied in Tray packaging. All other specifications are identical.

Q: Are both parts RoHS compliant?

A: Yes. Both parts are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: Can I use the substitute part in new designs?

A: Yes. The substitute part is Active and recommended for new designs. It provides the same functionality and specifications as the original part while ensuring supply chain continuity.