ARJ11C-MASAB-B-A-1MU2 Equivalent & Substitute Parts

Part Overview

The ARJ11C-MASAB-B-A-1MU2 is a 1-port RJ45 through-hole connector manufactured by Abracon LLC, designed for 10/100 Base-T Ethernet applications with AutoMDIX capability. This connector features a 90° right-angle orientation, solder termination, and integrated board lock mechanism. The part is currently active in production with 783 units in stock.

Substitute parts are identified when equivalent electrical and mechanical specifications are met, enabling component interchangeability in applications where the original part becomes unavailable or when inventory constraints require alternative sourcing.

Substiute Parts

ARJ11C-MASAB-B-A-1MU2
Abracon LLCIn Stock: 874ARJ11C-MASAB-B-A-1MU2 Datasheet
ARJ11C-MASAB-B-A-1MU2
Current Part
A63-113-213N491
Mercury United Electronics, Inc.In Stock: 1394A63-113-213N491 Datasheet
A63-113-213N491
MFR Recommended

Key Parameters

Parameter Value
Connector Type RJ45
Number of Ports 1
Mounting Type Through Hole
Orientation 90° Angle (Right)
Termination Solder
Applications 10/100 Base-T, AutoMDIX
Shielding Shielded, EMI Finger
Features Board Lock
Operating Temperature 0°C ~ 70°C
Contact Finish Gold
RoHS Status ROHS3 Compliant
MSL Rating 1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ARJ11C-MASAB-B-A-1MU2 is determined by strict equivalence across the following critical parameters:

  • Connector Type: RJ45
  • Number of Ports: 1
  • Mounting Type: Through Hole
  • Orientation: 90° Angle (Right)
  • Termination: Solder
  • Applications: 10/100 Base-T, AutoMDIX
  • Shielding: Shielded, EMI Finger
  • Features: Board Lock
  • Operating Temperature Range: 0°C ~ 70°C
  • Contact Finish: Gold
  • RoHS Compliance: ROHS3 Compliant
  • MSL Rating: 1 (Unlimited)

The substitute part A63-113-213N491 manufactured by Mercury United Electronics, Inc. meets all specified electrical and mechanical requirements for direct substitution in applications requiring this connector category.

Parameter Comparison

Parameter ARJ11C-MASAB-B-A-1MU2 (Abracon LLC) A63-113-213N491 (Mercury United Electronics, Inc.)
Connector Type RJ45 RJ45
Number of Ports 1 1
Number of Rows 1 1
Mounting Type Through Hole Through Hole
Orientation 90° Angle (Right) 90° Angle (Right)
Termination Solder Solder
Applications 10/100 Base-T, AutoMDIX 10/100 Base-T, AutoMDIX
Shielding Shielded, EMI Finger Shielded, EMI Finger
Features Board Lock Board Lock
Tab Direction Up Up
Contact Finish Gold Gold
Operating Temperature 0°C ~ 70°C 0°C ~ 70°C
Number of Cores per Jack 4 4
LED Color Yellow - Green Yellow - Green
RoHS Status ROHS3 Compliant ROHS3 Compliant
MSL Rating 1 (Unlimited) 1 (Unlimited)
REACH Status REACH Unaffected REACH Unaffected
ECCN EAR99 EAR99
HTSUS 8536.69.4040 8536.69.4040
Height Above Board 0.535" (14.69mm) 0.530" (13.45mm)
Contact Finish Thickness 6.00µin (0.152µm) 15.0µin (0.38µm)

Engineering Selection Recommendations

Both the ARJ11C-MASAB-B-A-1MU2 and A63-113-213N491 are active production parts with ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements for electronic component deployment. The substitute part A63-113-213N491 maintains functional equivalence across all critical electrical and mechanical parameters specified for 10/100 Base-T Ethernet applications.

The A63-113-213N491 demonstrates higher contact finish thickness (15.0µin versus 6.00µin), which may provide extended contact durability in high-cycle insertion applications. Both parts are classified as MSL 1 (Unlimited), indicating no moisture sensitivity constraints during storage or handling.

Selection between these parts should be based on availability, lead time requirements, and procurement cost considerations, as both meet the specified application requirements.

Frequently Asked Questions (FAQ)

Q: Can A63-113-213N491 be used as a direct replacement for ARJ11C-MASAB-B-A-1MU2?

A: Yes. Both connectors meet equivalent specifications for RJ45 1-port through-hole solder termination with 90° right-angle orientation, 10/100 Base-T AutoMDIX capability, shielded EMI finger design, and board lock features. Operating temperature range, contact finish material, and regulatory compliance are identical.

Q: What is the difference in height above board between these parts?

A: The ARJ11C-MASAB-B-A-1MU2 has a height of 0.535" (14.69mm), while the A63-113-213N491 measures 0.530" (13.45mm). This 0.005" (0.14mm) difference is within typical PCB layout tolerances for through-hole connector applications.

Q: Are there differences in contact finish specifications?

A: The ARJ11C-MASAB-B-A-1MU2 specifies 6.00µin (0.152µm) contact finish thickness, while the A63-113-213N491 specifies 15.0µin (0.38µm). Both use gold contact finish. The thicker finish on the substitute part may provide enhanced contact durability in applications with frequent mating cycles.

Q: Do both parts have the same MSL rating?

A: Yes. Both the ARJ11C-MASAB-B-A-1MU2 and A63-113-213N491 are rated MSL 1 (Unlimited), indicating no moisture sensitivity requirements during storage, handling, or assembly processes.

Q: Are regulatory certifications equivalent?

A: Yes. Both parts are ROHS3 compliant, REACH unaffected, classified as EAR99 for export control purposes, and share the same HTSUS code (8536.69.4040).

Request Quote (Ships tomorrow)