ARD10012M06 Equivalent & Substitute Parts

Part Overview

The ARD10012M06 is an RF Switch IC featuring Single-Pole Double-Throw (SPDT) topology designed for general-purpose applications across the 0 Hz to 18 GHz frequency range. This active product from Panasonic Electric Works operates at 12V supply voltage with 50Ohm impedance, delivering 60 dB minimum isolation and 0.5 dB maximum insertion loss at 18 GHz test frequency. The module-based pin contact package with RoHS compliance and unlimited moisture sensitivity rating (MSL 1) makes it suitable for demanding RF switching applications. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained across the specified parameter set.

Key Parameters

Parameter	Value
Manufacturer Part Number	ARD10012M06
Manufacturer	Panasonic Electric Works
Series	ARD
Product Status	Active
RF Type	General Purpose
Circuit Topology	SPDT
Frequency Range	0 Hz ~ 18 GHz
Isolation (Min)	60 dB
Insertion Loss (Max)	0.5 dB
Test Frequency	18 GHz
Impedance	50 Ohm
Voltage - Supply	12V
Operating Temperature Range	-55°C ~ 85°C
Package / Case	Module, Pin Contacts
RoHS Status	RoHS Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
ECCN	EAR99

Substitute Part Grouping Explanation

Substitute parts for the ARD10012M06 are qualified based on strict equivalence across the following critical parameters:

Circuit Topology: SPDT configuration maintained
Frequency Range: 0 Hz ~ 18 GHz operation preserved
RF Performance: 60 dB minimum isolation and 0.5 dB maximum insertion loss at 18 GHz
Impedance: 50 Ohm characteristic impedance
Operating Temperature: -55°C ~ 85°C range
Package Type: Module with pin contacts
Compliance: RoHS and MSL ratings

The ARD15105Q qualifies as a parametric equivalent based on matching RF performance specifications, frequency range, impedance, package configuration, and environmental ratings. The primary design consideration is supply voltage differentiation: ARD10012M06 operates at 12V while ARD15105Q operates at 5V. This voltage difference requires circuit-level evaluation for power supply compatibility in the target application.

Parameter Comparison

Parameter	ARD10012M06	ARD15105Q	Match Status
Manufacturer	Panasonic Electric Works	Panasonic Electric Works	Equivalent
Series	ARD	ARD	Equivalent
Product Status	Active	Active	Equivalent
RF Type	General Purpose	General Purpose	Equivalent
Circuit Topology	SPDT	SPDT	Equivalent
Frequency Range	0 Hz ~ 18 GHz	0 Hz ~ 18 GHz	Equivalent
Isolation (Min)	60 dB	60 dB	Equivalent
Insertion Loss (Max)	0.5 dB	0.5 dB	Equivalent
Test Frequency	18 GHz	18 GHz	Equivalent
Impedance	50 Ohm	50 Ohm	Equivalent
Voltage - Supply	12V	5V	Different
Operating Temperature Range	-55°C ~ 85°C	-55°C ~ 85°C	Equivalent
Package / Case	Module, Pin Contacts	Module, Pin Contacts	Equivalent
RoHS Status	RoHS Compliant	ROHS3 Compliant	Equivalent
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	Equivalent
ECCN	EAR99	EAR99	Equivalent

Engineering Selection Recommendations

Both ARD10012M06 and ARD15105Q are active products from Panasonic Electric Works with equivalent RF performance specifications and identical package configurations. Selection between these parts is determined by power supply architecture requirements:

ARD10012M06 is specified for 12V supply operation and maintains RoHS compliance with unlimited MSL rating.

ARD15105Q is specified for 5V supply operation and maintains ROHS3 compliance with unlimited MSL rating, offering enhanced environmental compliance status.

The choice between these parts depends on the available supply voltage in the target circuit. Both parts satisfy identical RF switching performance requirements across the 0 Hz to 18 GHz frequency range with matching isolation, insertion loss, and impedance characteristics. Compliance certifications (RoHS/ROHS3, EAR99, MSL 1) are equivalent for both parts.

Frequently Asked Questions (FAQ)

Q: Can ARD15105Q replace ARD10012M06 in an existing design?

A: ARD15105Q is electrically and mechanically equivalent to ARD10012M06 across all RF performance parameters and package specifications. The critical difference is supply voltage: ARD10012M06 requires 12V while ARD15105Q requires 5V. Substitution is possible only if the circuit power supply can be modified to provide 5V instead of 12V to the RF switch IC.

Q: Are the RF performance specifications identical between these parts?

A: Yes. Both parts deliver 60 dB minimum isolation, 0.5 dB maximum insertion loss at 18 GHz, 50 Ohm impedance, and operate across the 0 Hz to 18 GHz frequency range. RF switching performance is equivalent.

Q: What is the significance of ROHS3 compliance on ARD15105Q versus RoHS compliance on ARD10012M06?

A: Both parts meet RoHS environmental compliance requirements. ROHS3 represents an updated compliance designation. Both are acceptable for applications requiring RoHS compliance.

Q: Are the package and pin configurations identical?

A: Yes. Both parts use Module package type with pin contacts, ensuring mechanical and electrical interface compatibility when supply voltage requirements are satisfied.

Q: What operating temperature range applies to both parts?

A: Both ARD10012M06 and ARD15105Q operate across -55°C to 85°C, providing equivalent thermal performance specifications.

Q: Is inventory availability a factor in part selection?

A: ARD10012M06 has 862 pieces in stock while ARD15105Q has 755 pieces in stock. Availability should be evaluated based on project timeline and quantity requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message