AR1335CSSC11SMKA0-CP2 Equivalent & Substitute Parts

Part Overview

The AR1335CSSC11SMKA0-CP2 is a 13-megapixel CMOS image sensor manufactured by onsemi, designed for 1/3-inch optical format applications. This component features a 4208H x 3120V active pixel array with 1.1µm x 1.1µm pixel dimensions, capable of 30 frames per second operation. The device is packaged in a 63-pin ODCSP (6.29x5.69mm) ball grid array configuration.

The AR1335CSSC11SMKA0-CP2 carries an obsolete product status. Locating equivalent or substitute components becomes necessary for ongoing production support, design revisions, or inventory replenishment when original stock is unavailable.

Substiute Parts

AR1335CSSC11SMKA0-CP2

onsemiIn Stock: 1002AR1335CSSC11SMKA0-CP2 Datasheet

Current PartRFQ

AR1335CSSC11SMKA0-CP

onsemiIn Stock: 4288AR1335CSSC11SMKA0-CP Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AR1335CSSC11SMKA0-CP2 is determined by strict alignment of the following parameters:

• Sensor type (CMOS)
• Resolution and active pixel array (4208H x 3120V)
• Pixel dimensions (1.1µm x 1.1µm)
• Frame rate capability (30 fps)
• Package configuration (63-ODCSP, 6.29x5.69mm)
• Compliance certifications (RoHS3, REACH Unaffected)
• Moisture sensitivity level (MSL 4)

The AR1335CSSC11SMKA0-CP qualifies as a direct substitute based on identical electrical and mechanical specifications across all critical parameters.

Parameter Comparison

Engineering Selection Recommendations

The AR1335CSSC11SMKA0-CP is the manufacturer-recommended substitute for the obsolete AR1335CSSC11SMKA0-CP2. Both components maintain identical electrical and mechanical specifications across all critical parameters, including sensor architecture, pixel configuration, frame rate, and package dimensions.

The substitute part carries active product status, ensuring ongoing availability and manufacturing support. Both components satisfy ROHS3 compliance and REACH unaffected requirements, maintaining regulatory alignment for applications requiring these certifications.

The supply voltage specification (1.8V, 2.8V) is documented for the active substitute part, providing explicit power supply requirements for system design integration.

Frequently Asked Questions (FAQ)

Q: Can AR1335CSSC11SMKA0-CP replace AR1335CSSC11SMKA0-CP2 in existing designs?

A: Yes. Both components share identical sensor specifications, pixel array dimensions, frame rate capability, and package configuration. The substitute part is the manufacturer-recommended replacement for the obsolete variant.

Q: Are there differences in package dimensions between these parts?

A: No. Both components use the 63-ODCSP package with identical dimensions of 6.29x5.69mm. PCB footprints and mechanical mounting requirements remain unchanged.

Q: What is the significance of the product status difference?

A: The AR1335CSSC11SMKA0-CP2 is classified as obsolete, indicating discontinued manufacturing. The AR1335CSSC11SMKA0-CP maintains active status, ensuring continued production, technical support, and supply chain availability.

Q: Are compliance certifications maintained across both parts?

A: Yes. Both components are ROHS3 compliant and REACH unaffected. MSL rating remains 4 (72 Hours) for both variants, maintaining identical moisture handling requirements.

Q: What supply voltage should be applied to the substitute part?

A: The AR1335CSSC11SMKA0-CP operates at 1.8V and 2.8V supply voltages. Confirm specific voltage requirements with your system design specifications and power distribution architecture.