Equivalent & Substitute Parts for APT60M60JFLL

Part Overview

APT60M60JFLL is an active N-channel MOSFET produced by Microchip Technology, categorized under Transistors, FETs, MOSFETs. It is packaged in a tube and designed for chassis mounting in the ISOTOP® (SOT-227-4, miniBLOC) form factor. It supports a drain-source voltage of 600 V and a continuous drain current of 70A (Tc). Given supply chain flexibility, project lifecycle management, or inventory considerations, it is essential to identify alternative models with equivalent electrical and mechanical parameters.

Substiute Parts

APT60M60JFLL

Microchip TechnologyIn Stock: 40462APT60M60JFLL Datasheet

Current PartRFQ

IXFN110N60P3

IXYSIn Stock: 68697IXFN110N60P3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution candidates for APT60M60JFLL are identified by matching the following key parameters: FET type (N-channel), technology (MOSFET Metal Oxide), drain to source voltage (Vdss), continuous drain current (Id @ 25°C), drive voltage for Rds On, maximum Rds On value at defined conditions, gate threshold voltage, gate charge, maximum gate-source voltage (Vgs), input capacitance, power dissipation, operating temperature range, mounting type, package/case format, moisture sensitivity level, and regulatory compliance (RoHS, REACH). Only parts explicitly listed under the substitute part list are considered equivalent, as they strictly conform to the provided parameters.

Parameter Comparison

Engineering Selection Recommendations

Both APT60M60JFLL and the substitute IXFN110N60P3 maintain active product status, ROHS3 Compliance, REACH Unaffected designations, and ECCN EAR99. Moisture Sensitivity Level is 1 (Unlimited) for both parts, supporting standard handling and reflow processes. Packaging, mounting, and device case types are consistent for direct substitution within the defined mechanical form factor.

Frequently Asked Questions (FAQ)

Q: What electrical parameters must match when substituting MOSFETs in the SOT-227-4, miniBLOC category?
A: Critical substitution requires matching FET type, technology, drain-source voltage rating, continuous drain current at specified temperature, gate and drive voltages, Rds On values at defined conditions, and operating temperature range.

Q: Are packaging and mounting configurations equivalent between APT60M60JFLL and IXFN110N60P3?
A: Both parts utilize tube packaging and support chassis mounting in the SOT-227-4, miniBLOC format.

Q: Are there differences in environmental or regulatory compliance between the main part and substitute?
A: Both APT60M60JFLL and IXFN110N60P3 are ROHS3 Compliant, REACH Unaffected, and classified under ECCN EAR99.

Q: Does the substitute part offer equivalent thermal and mechanical management?
A: Both devices support chassis mounting and are rated for similar junction temperature ranges, aligning with the category requirements.

Q: How is Moisture Sensitivity Level (MSL) relevant for these substitutions?
A: Each part is rated MSL 1 (Unlimited), indicating compatibility with standard industrial assembly procedures.