Equivalent & Substitute Parts Reference for APT6013B2LLG

Part Overview

The APT6013B2LLG is an N-Channel MOSFET manufactured by Microchip Technology, belonging to the POWER MOS 7® series. It is rated for 600V Vdss, 43A continuous drain current (Tc), and is provided in a TO-247-3 variant through-hole package (T-MAX™ [B2]). The product is listed as active and compliant with RoHS3 and REACH requirements, with an unlimited moisture sensitivity level (MSL 1).
Finding alternative or equivalent models for APT6013B2LLG may be necessary in cases where sourcing is limited, supply chain alternatives are needed, or specific compliance/documentation requirements exist.

Key Parameters

Parameter	Specification
Manufacturer	Microchip Technology
Manufacturer Part Number	APT6013B2LLG
Category	Transistors, FETs, MOSFETs
FET Type	N-Channel
Drain to Source Voltage (Vdss)	600 V
Current - Continuous Drain (Id) @ 25°C	43A (Tc)
Rds On (Max) @ Id, Vgs	130mOhm @ 21.5A, 10V
Vgs(th) (Max) @ Id	5V @ 2.5mA
Gate Charge (Qg) (Max) @ Vgs	130 nC @ 10 V
Input Capacitance (Ciss) (Max) @ Vds	5630 pF @ 25 V
Technology	MOSFET (Metal Oxide)
Mounting Type	Through Hole
Supplier Device Package	T-MAX™ [B2]
Package / Case	TO-247-3 Variant
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
REACH Status	REACH Unaffected
Product Status	Active

Substitute Part Grouping Explanation

Substitute relationships are established strictly based on the following key electrical and mechanical parameters:

FET Type: N-Channel MOSFET
Drain to Source Voltage (Vdss)
Continuous Drain Current (Id) @ 25°C (Tc)
Rds On (Max) @ specified Id and Vgs
Gate Charge (Qg) (Max) @ Vgs
Input Capacitance (Ciss) (Max) @ Vds
Package Type/Through-Hole Mounting
Compliance status (RoHS, REACH, MSL) Only parts matching these allowed parameters from the input are included as substitutes.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Vdss (V)	Id @ 25°C (Tc) (A)	Rds On (Max) @ Id, Vgs (mOhm @ A, V)	Vgs(th) (Max) @ Id	Gate Charge (Qg) (Max) @ Vgs	Input Capacitance (Ciss) (Max) @ Vds	Mounting Type	Package / Case	RoHS Status	MSL	REACH Status	Product Status
APT6013B2LLG	Microchip Technology	600	43	130 @ 21.5, 10	5V @ 2.5mA	130 nC @ 10 V	5630 pF @ 25 V	Through Hole	TO-247-3 Variant	ROHS3 Compliant	1	REACH Unaffected	Active
IPW60R099C6FKSA1	Infineon Technologies	600	37.9	99 @ 18.1, 10	3.5V @ 1.21mA	119 nC @ 10 V	2660 pF @ 100 V	Through Hole	TO-247-3	ROHS3 Compliant	1	REACH Unaffected	Not For New Designs
IPW60R099CPFKSA1	Infineon Technologies	650	31	99 @ 18, 10	3.5V @ 1.2mA	80 nC @ 10 V	2800 pF @ 100 V	Through Hole	TO-247-3	ROHS3 Compliant	1	REACH Unaffected	Not For New Designs
IPW60R125C6FKSA1	Infineon Technologies	600	30	125 @ 14.5, 10	3.5V @ 960µA	96 nC @ 10 V	2127 pF @ 100 V	Through Hole	TO-247-3	ROHS3 Compliant	1	REACH Unaffected	Not For New Designs
IXFR64N60Q3	IXYS	600	42	104 @ 32, 10	6.5V @ 4mA	190 nC @ 10 V	9930 pF @ 25 V	Through Hole	TO-247-3	ROHS3 Compliant	1	REACH Unaffected	Active
SPW32N50C3FKSA1	Infineon Technologies	560	32	110 @ 20, 10	3.9V @ 1.8mA	170 nC @ 10 V	4200 pF @ 25 V	Through Hole	TO-247-3	ROHS3 Compliant	1	REACH Unaffected	Active
SPW35N60CFDFKSA1	Infineon Technologies	600	34.1	118 @ 21.6, 10	5V @ 1.9mA	212 nC @ 10 V	5060 pF @ 25 V	Through Hole	TO-247-3	ROHS3 Compliant	1	REACH Unaffected	Not For New Designs
STW34NM60N	STMicroelectronics	600	29	105 @ 14.5, 10	4V @ 250µA	80 nC @ 10 V	2722 pF @ 100 V	Through Hole	TO-247-3	ROHS3 Compliant	1	REACH Unaffected	Active

Engineering Selection Recommendations

Selection should be made based on the following strictly provided criteria:

Product status: Only select parts with an "Active" product status for new designs.
Compliance: All listed substitutes are RoHS3 compliant and REACH unaffected.
Moisture Sensitivity: All listed substitutes are MSL 1 (Unlimited).
Mounting and package compatibility: All substitutes use a through-hole mounting type with TO-247-3 or industry-compatible package variants as specified.
Only input parameters may be used for final part selection.

Frequently Asked Questions (FAQ)

Q1: Which parameters determine whether a substitute is acceptable for the APT6013B2LLG?
A1: Substitutes must match or be compatible in FET type, drain to source voltage (Vdss), continuous drain current (Id), Rds On (Max), gate charge (Qg), input capacitance (Ciss), and package type. Only specifications explicitly provided are considered for equivalency.

Q2: Are package and mounting type critical for substitution?
A2: Yes, only through-hole mounted parts with a TO-247-3 or specified equivalent package are considered as valid substitutes for APT6013B2LLG.

Q3: Are the listed substitutes compliant with RoHS and REACH regulations?
A3: All substitutes provided are RoHS3 compliant and REACH unaffected, per the supplied information.

Q4: Can parts listed as "Not For New Designs" be used as substitutes?
A4: The product status should be reviewed in alignment with the intended application. For new projects, only "Active" status parts should be considered based strictly on the input.

Q5: What role do gate charge (Qg) and input capacitance (Ciss) play in substitution?
A5: Gate charge and input capacitance can affect switching behavior and must be evaluated based on values provided in the comparison table to ensure compatibility within application requirements. Only values given are considered.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message