APT6010LLLG Equivalent & Substitute Parts Reference

Part Overview

The APT6010LLLG is an N-channel power MOSFET manufactured by Microchip Technology, categorized under Transistors, FETs, MOSFETs. It features a 600V drain-to-source voltage, 54A continuous drain current (Tc), low Rds(on) of 100mOhm, and is housed in a TO-264 package for through-hole mounting. This device is part of the POWER MOS 7® series and maintains an active product status with comprehensive RoHS3 and REACH compliance.

Sourcing alternative models for APT6010LLLG is essential in scenarios of inventory shortage, allocation constraints, or for cost optimization. Equivalent and substitute selection must be strictly based on matching electrical and mechanical parameters as documented.

Key Parameters

Parameter	APT6010LLLG
Category	Transistors, FETs, MOSFETs
FET Type	N-Channel
Drain to Source Voltage (Vdss)	600 V
Current - Continuous Drain (Id) @ 25°C	54A (Tc)
Rds On (Max) @ Id, Vgs	100mOhm @ 27A, 10V
Vgs(th) (Max) @ Id	5V @ 2.5mA
Gate Charge (Qg) (Max) @ Vgs	150 nC @ 10 V
Input Capacitance (Ciss) (Max) @ Vds	6710 pF @ 25 V
Mounting Type	Through Hole
Package / Case	TO-264-3, TO-264AA
RoHS Status	ROHS3 Compliant
REACH Status	REACH Unaffected
MSL	1 (Unlimited)
Product Status	Active

Substitute Part Grouping Explanation

Substitute parts for APT6010LLLG are grouped strictly according to the following electrical and mechanical key parameters:

MOSFET type (N-Channel)
Drain-to-source voltage (Vdss)
Current - continuous drain (Id) at 25°C (Tc)
Maximum Rds(on) under specified test conditions
Vgs(th) (Max) at specified test current
Gate charge (Qg, Max) @ Vgs
Input capacitance (Ciss, Max) @ Vds
Through-hole mounting type
Package compatibility (TO-264-3, TO-264AA, or similar for direct footprint compatibility)
RoHS and REACH status for environmental compliance Only parts matching or exceeding these criteria are included as valid substitutes.

Parameter Comparison

Parameter	APT6010LLLG	FCH104N60	FCH104N60F-F085	IXFB60N80P	IXFK48N60Q3
FET Type	N-Channel	N-Channel	N-Channel	N-Channel	N-Channel
Drain to Source Voltage (Vdss)	600 V	600 V	600 V	800 V	600 V
Current - Continuous Drain (Id) @ 25°C	54A (Tc)	37A (Tc)	37A (Tc)	60A (Tc)	48A (Tc)
Rds On (Max) @ Id, Vgs	100mOhm @ 27A, 10V	104mOhm @ 18.5A, 10V	104mOhm @ 18.5A, 10V	140mOhm @ 30A, 10V	140mOhm @ 24A, 10V
Vgs(th) (Max) @ Id	5V @ 2.5mA	3.5V @ 250µA	5V @ 250µA	5V @ 8mA	6.5V @ 4mA
Gate Charge (Qg) (Max) @ Vgs	150 nC @ 10 V	82 nC @ 10 V	139 nC @ 10 V	250 nC @ 10 V	140 nC @ 10 V
Input Capacitance (Ciss) (Max) @ Vds	6710 pF @ 25 V	4165 pF @ 380 V	4302 pF @ 100 V	18000 pF @ 25 V	7020 pF @ 25 V
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Package / Case	TO-264-3, TO-264AA	TO-247-3	TO-247-3	TO-264-3, TO-264AA	TO-264-3, TO-264AA
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
REACH Status	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected
Product Status	Active	Obsolete	Not For New Designs	Active	Active

Engineering Selection Recommendations

From a compliance viewpoint, all parts listed are ROHS3 Compliant and REACH Unaffected, satisfying standard regulatory requirements. Product status is critical for lifecycle management. APT6010LLLG, IXFB60N80P, and IXFK48N60Q3 are classified as Active, indicating continued manufacturer support. FCH104N60 is Obsolete and FCH104N60F-F085 is Not For New Designs, which are significant for long-term sourcing considerations. All substitute devices with a package/case of TO-264-3 or TO-264AA provide direct mechanical compatibility. Moisture Sensitivity Level (MSL) is 1 or Not Applicable for these models, aligning with unlimited floor life requirements.

Frequently Asked Questions (FAQ)

Q: What are the primary criteria used for determining equivalent and substitute MOSFETs for APT6010LLLG?
A: Substitute selection is strictly based on matching or exceeding the following parameters: MOSFET type (N-Channel), drain-to-source voltage, maximum continuous drain current at 25°C, maximum Rds(on) at specified test currents, package compatibility (TO-264-3 or equivalent through-hole package), and matching RoHS/REACH compliance.

Q: Are there mechanical or pinout differences among these substitute MOSFETs?
A: Parts with TO-264-3 or TO-264AA package types provide the same mechanical footprint. Substitute models with TO-247-3 package require mechanical and PCB footprint verification for direct replacement.

Q: How does product status impact selection for engineering designs?
A: Active product status ensures ongoing manufacturer support and availability. "Obsolete" or "Not For New Designs" statuses indicate supply limitations or pending lifecycle end; these should be considered only with adequate inventory or for non-new designs.

Q: How is environmental compliance addressed?
A: All substitute MOSFETs listed maintain ROHS3 Compliant and REACH Unaffected designations, supporting adherence to standard hazardous substance and chemical regulations.

Q: What package considerations are necessary when substituting APT6010LLLG?
A: Only MOSFETs in TO-264-3 or TO-264AA packages are directly compatible with the APT6010LLLG footprint. Devices in alternative through-hole packages must be evaluated for PCB fit and mechanical integration.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message