APT43M60L Equivalent & Substitute Parts Reference

Part Overview

The APT43M60L is an N-channel MOSFET in the Transistors, FETs, MOSFETs category, manufactured by Microchip Technology. It features a drain-to-source voltage (Vdss) of 600 V, a continuous drain current of 45A (Tc), and is housed in a TO-264 [L] through-hole package. The product status is active, and it belongs to the POWER MOS 8™ series. The need to identify alternative models arises when considering supply continuity, design flexibility, or inventory management, as substitutions must strictly match allowed key electrical and mechanical parameters for this category.

Substiute Parts

APT43M60L

Microchip TechnologyIn Stock: 1195APT43M60L Datasheet

Current PartRFQ

IPW60R099CPAFKSA1

Infineon TechnologiesIn Stock: 989IPW60R099CPAFKSA1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute components for APT43M60L are selected solely by matching the critical electrical and mechanical parameters defined for the MOSFETs product category. Key parameters compared include FET type, drain to source voltage (Vdss), continuous drain current (Id), Rds On, drive voltage, gate charge, input capacitance, maximum Vgs, power dissipation, and package type. These parameters ensure cross-compatibility within application and system design constraints without introducing unvalidated features.

Listed key parameters:

• FET Type
• Technology
• Vdss
• Id (Continuous Drain Current)
• Rds On
• Gate Charge (Qg)
• Vgs (Max)
• Package / Case
• Mounting Type
• RoHS and REACH Compliance
• MSL
• ECCN

Parameter Comparison

Engineering Selection Recommendations

Both APT43M60L and IPW60R099CPAFKSA1 are active, ROHS3 compliant, and maintain an unrestricted moisture sensitivity level (MSL 1). Both have REACH unaffected and ECCN EAR99 classifications. Selection for substitution should be based on compliant product status, identical compliance metrics, and package availability per the provided component parameters.

Frequently Asked Questions (FAQ)

Q1: What criteria are used to select equivalent or substitute MOSFETs?
A1: Substitutes are selected based on matching key electrical characteristics (FET type, Vdss, Id, Rds On, Vgs, Qg), package/mechanical form factor, mounting type, and compliance status (RoHS, REACH, ECCN).

Q2: Are there any differences in package compatibility to consider?
A2: The APT43M60L uses a TO-264-3, TO-264AA package, while the IPW60R099CPAFKSA1 is in TO-247-3. Mechanical and board-level compatibility must be based strictly on the provided package information.

Q3: Can differences in continuous drain current or maximum Vgs affect direct substitution?
A3: Substitute selection here is provided solely per the specified parameters. Current capability and maximum Vgs differ in the two models and are included for strict reference comparison.

Q4: Are both parts compliant with environmental regulations?
A4: Both parts are ROHS3 compliant and REACH unaffected according to provided information.

Q5: What mounting type is supported by the listed substitutes?
A5: Both APT43M60L and IPW60R099CPAFKSA1 support through-hole mounting as specified.