Equivalent & Substitute Parts: APT2X30D100J (Microchip Technology)

Part Overview

The Microchip Technology APT2X30D100J is a diode module categorized under Diodes, Rectifiers. It features a configuration of two independent diodes with a maximum DC reverse voltage of 1000 V and an average rectified current of 28 A per diode. The component is manufactured in the SOT-227-4, miniBLOC package and supports chassis mounting. This module is actively supplied and RoHS3 compliant, ensuring suitability for applications with environmental compliance requirements.

Selection of alternative models may be required due to inventory management, production continuity, or strategic sourcing objectives. Substitution is determined by matching key electrical and mechanical parameters.

Substiute Parts

APT2X30D100J

Microchip TechnologyIn Stock: 1007APT2X30D100J Datasheet

Current PartRFQ

APT2X31D100J

Microchip TechnologyIn Stock: 785APT2X31D100J Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution within the Diodes, Rectifiers category is determined by strict equivalence in essential parameters. These parameters are:

• Diode configuration
• Maximum DC reverse voltage
• Average rectified current per diode
• Forward voltage at rated current
• Reverse recovery time
• Reverse leakage current
• Package type and mounting configuration
• Compliance and certification status

Only parts matching these attributes are permitted as direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

APT2X30D100J and APT2X31D100J are both active status products, RoHS3 compliant, REACH unaffected, and have the same moisture sensitivity level and export control classification. Substitution is approved based on equivalent compliance and certifications.

Frequently Asked Questions (FAQ)

Q: What criteria must be satisfied for substituting APT2X30D100J in the Diodes, Rectifiers category?
A: The substitute must match diode configuration, voltage ratings, current ratings, package type, speed, recovery time, leakage characteristics, and compliance status.

Q: Is the SOT-227-4, miniBLOC package important for interchangeability?
A: Yes. Matching the package and mounting type is required for compatibility in mechanical installation.

Q: Do the substitute parts maintain environmental and export compliance?
A: Both APT2X30D100J and APT2X31D100J are ROHS3 compliant, REACH unaffected, and classified ECCN EAR99.

Q: Are there differences in electrical parameters between the main and substitute parts?
A: All key electrical parameters are identical per provided data. No differences exist for substitution.

Q: Is the supplier device package (ISOTOP®) compatible between the main and substitute parts?
A: Yes. Both parts utilize the ISOTOP® package.