Equivalent & Substitute Parts Reference for APT20M22B2VRG

Part Overview

The APT20M22B2VRG (Microsemi Corporation) is an N-channel Power MOSFET with a drain-to-source voltage rating of 200 V and a continuous drain current of 100A (Tc), offered in a T-MAX™ [B2] through-hole package. This device belongs to the POWER MOS V® series and delivers a maximum power dissipation of 520W (Tc), suitable for high-current switching applications. The product is currently classified as Obsolete, necessitating the selection of alternative models with matching electrical and mechanical parameters for ongoing designs or replacements.

Substiute Parts

APT20M22B2VRG

Microsemi CorporationIn Stock: 890APT20M22B2VRG Datasheet

Current PartRFQ

IXFH120N20P

IXYSIn Stock: 2220IXFH120N20P Datasheet

SimilarRFQ

IXFR140N20P

IXYSIn Stock: 1443IXFR140N20P Datasheet

SimilarRFQ

IXTH130N20T

IXYSIn Stock: 32587IXTH130N20T Datasheet

SimilarRFQ

IXTQ120N20P

IXYSIn Stock: 5935IXTQ120N20P Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are grouped strictly based on matching electrical and mechanical parameters. The primary criteria for equivalence are:

• Category: Transistors, FETs, MOSFETs
• FET Type: N-Channel
• Technology: MOSFET (Metal Oxide)
• Drain to Source Voltage (Vdss): 200 V
• Current - Continuous Drain (Id) @ 25°C: Comparable or higher
• Drive Voltage (Max Rds On, Min Rds On): 10V
• Rds On (Max): Comparable value
• Package Type: Through Hole, TO-247-3 or compatible
• Moisture Sensitivity Level (MSL): 1 (Unlimited)
• REACH Status: Unaffected

No additional substitution criteria are considered beyond provided data. Only parts meeting these parameters in the same product category are included in the equivalence list.

Parameter Comparison

Engineering Selection Recommendations

APT20M22B2VRG is designated Obsolete. Substitute selections are confined to models that are Active and comply with the specified environmental certifications (RoHS3, REACH Unaffected) and electrical/mechanical characteristics explicitly listed. All substitute parts included above conform to offered Moisture Sensitivity Level (MSL) requirements and meet REACH status criteria.

Frequently Asked Questions (FAQ)

Q1: What are the essential substitution criteria for APT20M22B2VRG?
A1: Substitute components must match the N-Channel MOSFET type, 200 V drain to source rating, comparable or higher continuous drain current, appropriate Rds On values, through-hole mounting, and a compatible package.

Q2: Are all substitute parts compatible with the TO-247-3 footprint?
A2: Substitute parts provided use TO-247-3, TO-3P-3, or compatible through-hole packages as per the listed package/case parameter.

Q3: Are substitute models RoHS or REACH compliant?
A3: All substitutes listed are REACH Unaffected and hold RoHS3 conformity status, as provided.

Q4: What distinguishes the listed substitute parts from the obsolete model?
A4: Substitute parts are Active products, uphold required electrical characteristics, and meet environmental and mechanical parameter requirements shared with the main device.

Q5: Can moisture sensitivity affect the substitution process?
A5: Moisture Sensitivity Level (MSL) for all listed substitutes is 1 (Unlimited), equivalent to the main model, and suitable for unrestricted device handling.

Q6: Is there any consideration outside the provided data for substitution?
A6: No. Only explicitly specified parameters are considered for substitution equivalence. No assumptions or extrapolations are used beyond supplied information.