Equivalent & Substitute Parts for APT10090SLLG

Part Overview

APT10090SLLG is an N-Channel MOSFET from Microchip Technology, belonging to the POWER MOS 7® series. It features a Drain to Source Voltage (Vdss) of 1000 V and a continuous drain current of 12A (Tc), with a maximum Rds On of 900mOhm at 6A, 10V. The device is packaged in a D3PAK (TO-268-3, D³Pak (2 Leads + Tab), TO-268AA) and is intended for surface mount applications. The part is currently active and compliant with ROHS3 and REACH standards.

Due to supply chain variability, lead-time constraints, or project requirements, it is necessary for engineers to identify alternative models that maintain compliance with the electrical, package, and environmental parameters defined by the original part.

Key Parameters

Parameter	APT10090SLLG
Category	Transistors, FETs, MOSFETs
FET Type	N-Channel
Technology	MOSFET (Metal Oxide)
Drain to Source Voltage (Vdss)	1000 V
Current - Continuous Drain (Id) @ 25°C	12A (Tc)
Rds On (Max) @ Id, Vgs	900mOhm @ 6A, 10V
Vgs(th) (Max) @ Id	5V @ 1mA
Gate Charge (Qg) (Max) @ Vgs	71 nC @ 10 V
Input Capacitance (Ciss) (Max) @ Vds	1969 pF @ 25 V
Mounting Type	Surface Mount
Supplier Device Package	D3Pak
Package / Case	TO-268-3, D³Pak (2 Leads + Tab), TO-268AA
RoHS Status	ROHS3 Compliant
REACH Status	REACH Unaffected
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Product Status	Active

Substitute Part Grouping Explanation

Substitutes are selected based on compatibility in electrical characteristics, package type, and compliance. Key parameters for substitution include:

N-Channel MOSFET type
MOSFET (Metal Oxide) technology
Drain to Source Voltage (Vdss)
Current - Continuous Drain (Id)
Maximum Rds On at specified test conditions
Vgs(th) (Max) (Gate Threshold Voltage at test current)
Maximum Gate Charge (Qg) at specified Vgs
Maximum Input Capacitance (Ciss) at specified Vds
Surface mount configuration
Matching Supplier Device Package and JEDEC case outline (TO-268-3, D³Pak/TO-268AA)
Compliance with ROHS3 and REACH
Moisture Sensitivity Level (MSL) of 1 (Unlimited)
Active product status

Only parts meeting these key parameters are listed as substitutes.

Parameter Comparison

Parameter	APT10090SLLG	IXFT15N100Q3	IXFT16N120P
Category	Transistors, FETs, MOSFETs	Transistors, FETs, MOSFETs	Transistors, FETs, MOSFETs
FET Type	N-Channel	N-Channel	N-Channel
Technology	MOSFET (Metal Oxide)	MOSFET (Metal Oxide)	MOSFET (Metal Oxide)
Drain to Source Voltage (Vdss)	1000 V	1000 V	1200 V
Current - Continuous Drain (Id) @ 25°C	12A (Tc)	15A (Tc)	16A (Tc)
Rds On (Max) @ Id, Vgs	900mOhm @ 6A, 10V	1.05Ohm @ 7.5A, 10V	950mOhm @ 500mA, 10V
Vgs(th) (Max) @ Id	5V @ 1mA	6.5V @ 4mA	6.5V @ 1mA
Gate Charge (Qg) (Max) @ Vgs	71 nC @ 10 V	64 nC @ 10 V	120 nC @ 10 V
Input Capacitance (Ciss) (Max) @ Vds	1969 pF @ 25 V	3250 pF @ 25 V	6900 pF @ 25 V
Mounting Type	Surface Mount	Surface Mount	Surface Mount
Supplier Device Package	D3Pak	TO-268AA	TO-268AA
Package / Case	TO-268-3, D³Pak (2 Leads + Tab), TO-268AA	TO-268-3, D³Pak (2 Leads + Tab), TO-268AA	TO-268-3, D³Pak (2 Leads + Tab), TO-268AA
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
REACH Status	REACH Unaffected	REACH Unaffected	REACH Unaffected
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Active	Active	Active

Engineering Selection Recommendations

All parts in this equivalency comparison have an active product status and adhere to ROHS3 compliance and REACH standards. The Moisture Sensitivity Level is rated at 1 (Unlimited), supporting a wide range of assembly environments and storage conditions. Packaging and device outline (Surface Mount, TO-268-3/D³Pak/TO-268AA) are matched, aligning with the requirements for direct substitution within this MOSFET category.

Frequently Asked Questions (FAQ)

Q1: What are the mandatory criteria for substituting APT10090SLLG?
A1: The substitute must be an N-Channel MOSFET with the same or higher Drain to Source Voltage (Vdss), comparable Rds On, matching or superior continuous drain current, compatible gate threshold and charge levels, and identical package (TO-268-3, D³Pak/TO-268AA) for surface mount applications. Compliance with ROHS3 and REACH, MSL rating, and active status are required.

Q2: Are the listed substitutes compatible with automated surface mount assembly?
A2: Yes, all compared parts are designed for surface mount mounting and use the TO-268-3, D³Pak (2 Leads + Tab), TO-268AA case.

Q3: Is there any difference in environmental compliance between the main and substitute parts?
A3: No, all parts are ROHS3 compliant, REACH unaffected, and rated at Moisture Sensitivity Level 1 (Unlimited).

Q4: Why is matching the supplier device package important for substitution?
A4: Matched package and mounting type ensure mechanical and soldering compatibility with existing PCB layouts, supporting seamless replacement in manufacturing and field service scenarios.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message