APG1005VGC-T-5MAV Equivalent & Substitute Parts

Part Overview

The APG1005VGC-T-5MAV is a green LED indication component manufactured by Kingbright, featuring a 527nm dominant wavelength in a 0402 (1005 Metric) surface mount package. This part is classified as Obsolete, necessitating identification of equivalent and substitute components for ongoing design requirements and procurement needs. The original part operates at 3V forward voltage with a 70mcd brightness rating and 145° viewing angle in a clear, colorless lens configuration.

Substiute Parts

APG1005VGC-T-5MAV

KingbrightIn Stock: 789APG1005VGC-T-5MAV Datasheet

Current PartRFQ

APG1005ZGC-5MAV

KingbrightIn Stock: 19058APG1005ZGC-5MAV Datasheet

MFR RecommendedRFQ

SML-A12P8TT86

Rohm SemiconductorIn Stock: 21061SML-A12P8TT86 Datasheet

SimilarRFQ

SML-P11MTT86R

Rohm SemiconductorIn Stock: 62110SML-P11MTT86R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the APG1005VGC-T-5MAV is determined by the following critical parameters:

Primary Compatibility Criteria:

• Package / Case format (0402 / 1005 Metric preferred for direct mechanical compatibility)
• Mounting Type (Surface Mount required)
• Color classification (Green or Green-Yellow acceptable within green spectrum)
• Wavelength range (515nm to 569nm acceptable for green indication applications)
• Voltage - Forward (Vf) operating range (1.9V to 3V acceptable with circuit design consideration)
• Current - Test rating (1mA to 20mA acceptable depending on circuit requirements)
• RoHS3 Compliance and MSL rating (mandatory for equivalent status)

Substitute Classification:

MFR Recommended Equivalent: APG1005ZGC-5MAV (Kingbright) - Direct form-fit-function replacement within same manufacturer series, identical package, active product status.

Similar Substitutes: SML-A12P8TT86 (Rohm Semiconductor) and SML-P11MTT86R (Rohm Semiconductor) - Alternative green spectrum LEDs with different package formats and electrical characteristics, suitable for applications where mechanical constraints permit package variation.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Preferred):

APG1005ZGC-5MAV is the primary recommended substitute. This part maintains identical mechanical compatibility (0402 package, 1.00mm x 0.50mm x 0.25mm maximum height), identical mounting type (surface mount), and identical test current (5mA). The part is manufactured by the same supplier (Kingbright) and carries Active product status with full ROHS3 compliance and MSL 3 rating. The forward voltage is slightly lower (2.85V vs. 3V), and brightness is significantly higher (280mcd vs. 70mcd), requiring circuit verification to confirm compatibility with existing current-limiting designs. The wavelength remains within the green spectrum (525nm vs. 527nm).

For Alternative Applications:

SML-A12P8TT86 (Rohm Semiconductor) is suitable where package size constraints are relaxed. This part features a larger 1611 (2-SMD, No Lead) package with right-angle mounting, lower forward voltage (2.2V), and significantly lower brightness (6.3mcd). The larger physical dimensions (1.60mm L x 1.15mm W x 0.65mm height) and different mounting orientation require PCB layout redesign.

SML-P11MTT86R (Rohm Semiconductor) is suitable for ultra-low-power applications. This part maintains the 0402 package format with minimal dimensional variation (1.00mm L x 0.60mm W x 0.25mm height). However, it operates at significantly lower current (1mA test current vs. 5mA) and brightness (2.1mcd vs. 70mcd), with a green-yellow wavelength (569nm) that may alter visual appearance. Forward voltage is substantially lower (1.9V).

All substitute parts carry ROHS3 compliance and MSL 3 (168 Hours) ratings, matching the original part's environmental and regulatory status.

Frequently Asked Questions (FAQ)

Q: Can APG1005ZGC-5MAV be used as a direct drop-in replacement for APG1005VGC-T-5MAV?

A: APG1005ZGC-5MAV provides mechanical and electrical compatibility with the following considerations: identical package (0402), mounting type (surface mount), and test current (5mA); forward voltage is 0.15V lower (2.85V vs. 3V); brightness is 4x higher (280mcd vs. 70mcd). Circuit verification is required to confirm the lower forward voltage and higher brightness do not exceed design specifications for current-limiting resistors or optical intensity requirements.

Q: What are the key differences between the MFR Recommended substitute and the Similar substitutes?

A: APG1005ZGC-5MAV (MFR Recommended) maintains identical package format (0402) and test current (5mA), requiring no PCB layout changes. SML-A12P8TT86 uses a larger 1611 package with right-angle mounting, requiring PCB redesign. SML-P11MTT86R maintains 0402 package but operates at 1mA test current and 2.1mcd brightness, suitable only for low-power indicator applications. All three are Active products with full compliance certifications.

Q: Are there viewing angle differences between substitute parts?

A: APG1005VGC-T-5MAV specifies 145° viewing angle; APG1005ZGC-5MAV specifies 140° viewing angle, a 5° reduction. SML-A12P8TT86 and SML-P11MTT86R do not provide viewing angle specifications in available data. Applications requiring specific viewing angle performance should verify optical characteristics with manufacturer datasheets.

Q: What is the impact of wavelength differences on visual appearance?

A: APG1005VGC-T-5MAV and APG1005ZGC-5MAV both operate at 527nm and 525nm respectively, within the pure green spectrum with negligible visual difference. SML-A12P8TT86 operates at 560nm (yellow-green shift). SML-P11MTT86R operates at 569nm (green-yellow), producing noticeably warmer appearance. Applications requiring consistent green color should use APG1005ZGC-5MAV.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. APG1005VGC-T-5MAV, APG1005ZGC-5MAV, SML-A12P8TT86, and SML-P11MTT86R all carry ROHS3 Compliant status. All parts also carry identical Moisture Sensitivity Level (MSL) rating of 3 (168 Hours), ensuring equivalent handling and storage requirements.

Q: What packaging formats are available for each substitute?

A: APG1005ZGC-5MAV is available in Cut Tape (CT) & Digi-Reel® packaging. SML-A12P8TT86 is available in Tape & Reel (TR) packaging. SML-P11MTT86R is available in Cut Tape (CT) & Digi-Reel® packaging. Packaging selection depends on procurement volume and assembly line requirements.