APE30006 Equivalent & Substitute Parts

Part Overview

The APE30006 is a general purpose relay manufactured by Panasonic Electric Works, featuring a Single Pole Double Throw (SPDT) contact configuration rated for 6A at 6VDC. This through-hole mounted relay is designed for applications requiring reliable switching of AC loads up to 250VAC. The APE30006 is classified as obsolete, making identification of suitable substitute components essential for ongoing system support and new design implementations.

Substiute Parts

APE30006

Panasonic Electric WorksIn Stock: 1157APE30006 Datasheet

Current PartRFQ

APF30206

Panasonic Electric WorksIn Stock: 1474APF30206 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the APE30006 is determined by strict equivalence across the following critical parameters:

• Coil voltage specification (6VDC)
• Contact configuration (SPDT / 1 Form C)
• Current rating (6A minimum)
• Maximum switching voltage (250VAC or higher)
• Mounting technology (Through Hole)
• Operating temperature range compatibility (-40°C ~ 85°C)
• Coil resistance (212 Ohms nominal)

The APF30206 qualifies as a direct substitute based on matching all mandatory electrical and mechanical parameters. Both relays share identical contact ratings, coil voltage, contact form, and mounting methodology. The APF30206 represents an active product status alternative, ensuring continued availability and supply chain reliability.

Parameter Comparison

Engineering Selection Recommendations

The APF30206 is the qualified substitute for the APE30006. Selection of the APF30206 is supported by:

• Identical electrical specifications across all critical switching parameters
• Active product status ensuring long-term availability and supply continuity
• RoHS compliance certification, meeting current environmental and regulatory standards
• Equivalent mechanical and thermal performance characteristics
• Maintained coil resistance and switching timing specifications
• Compatible contact material composition for equivalent switching reliability

The APF30206 is suitable for direct replacement in applications currently utilizing the APE30006, with no circuit modifications required.

Frequently Asked Questions (FAQ)

Q: Can the APF30206 be used as a direct replacement for the APE30006?

A: Yes. The APF30206 meets all electrical and mechanical specifications of the APE30006, including coil voltage, contact configuration, current rating, and mounting type. Direct substitution is supported without circuit redesign.

Q: What is the difference in coil current between the two relays?

A: The APE30006 specifies 28 mA coil current, while the APF30206 specifies 28.3 mA. This 0.3 mA difference is within normal manufacturing tolerance and does not affect circuit compatibility or performance.

Q: Are there differences in contact material?

A: The APE30006 uses Silver Alloy contacts, while the APF30206 uses Silver Nickel (AgNi) contacts. Both materials provide equivalent switching performance and reliability for the specified 6A / 250VAC rating.

Q: What packaging differences exist between these relays?

A: The APE30006 is supplied in standard packaging, while the APF30206 is supplied in tube packaging. Both are through-hole mounted components with identical PCB footprints and pin configurations.

Q: Why is the APE30006 marked as obsolete?

A: The APE30006 has been discontinued by the manufacturer. The APF30206 represents the active product continuation from Panasonic Electric Works, offering equivalent functionality with current manufacturing support and compliance certifications.

Q: Is the APF30206 RoHS compliant?

A: Yes. The APF30206 carries RoHS compliance certification, meeting current environmental regulations for electronic component manufacturing and use.