APDS-9130 Equivalent & Substitute Parts

Part Overview

The APDS-9130 is an infrared optical sensor module operating at 850nm wavelength with I2C digital output interface. This 8-SMD surface mount module integrates proximity detection capability and operates across a 2.2V to 3.6V supply voltage range. The product is classified as obsolete, necessitating identification of functionally compatible alternatives for ongoing design requirements and production continuity.

Substiute Parts

APDS-9130

Broadcom LimitedIn Stock: 917APDS-9130 Datasheet

Current PartRFQ

APDS-9160-003

Broadcom LimitedIn Stock: 42080APDS-9160-003 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The APDS-9160-003 is identified as a manufacturer-recommended substitute for the APDS-9130. Substitution compatibility is determined by the following critical parameters:

Common Substitution Criteria:

• Identical manufacturer (Broadcom Limited)
• Identical output interface (I2C digital communication)
• Identical mounting technology (Surface Mount, 8-SMD Module)
• Identical package form factor (8-SMD Module)
• Overlapping supply voltage range (both operate within 2.2V – 3.6V window)
• Identical proximity detection capability
• Equivalent environmental compliance (ROHS3, MSL 3)

Functional Differences:

• Sensor type: APDS-9160-003 is an ambient light sensor (550nm) versus infrared (850nm) in APDS-9130
• Operating temperature range: APDS-9160-003 extends to -40°C minimum versus -30°C for APDS-9130
• Product status: APDS-9160-003 is active production versus obsolete for APDS-9130

Parameter Comparison

Engineering Selection Recommendations

The APDS-9160-003 is the manufacturer-designated substitute for the obsolete APDS-9130. Both components maintain identical I2C interface protocol, 8-SMD module form factor, and surface mount compatibility, enabling direct PCB layout reuse without redesign.

Selection of APDS-9160-003 is supported by:

• Active production status ensuring long-term supply availability
• Extended operating temperature range (-40°C minimum) providing broader environmental coverage
• Identical RoHS3 and MSL 3 compliance certifications
• Equivalent supply voltage operating window within the 2.2V – 3.6V specification

The primary design consideration is the wavelength difference: APDS-9160-003 operates at 550nm (ambient light spectrum) versus 850nm (infrared spectrum) for APDS-9130. This wavelength shift alters the sensor's spectral response characteristics and application suitability. Applications requiring infrared detection at 850nm require evaluation of alternative infrared sensor modules rather than this ambient light sensor substitute.

Frequently Asked Questions (FAQ)

Q: Can APDS-9160-003 directly replace APDS-9130 in existing designs?

A: Direct PCB-level replacement is possible due to identical I2C interface, 8-SMD module package, and surface mount configuration. However, the wavelength difference (550nm ambient versus 850nm infrared) means the sensor responds to different light spectra. Applications dependent on infrared detection require functional validation before production deployment.

Q: What are the key compatibility parameters for substitution?

A: Substitution compatibility is determined by I2C output interface, 8-SMD module package form factor, surface mount technology, overlapping supply voltage range (2.2V – 3.6V), and proximity detection capability. Both components meet these criteria.

Q: Does APDS-9160-003 require firmware or software changes?

A: Both components use I2C communication protocol. Register-level command structures and data formats require verification against respective datasheets to confirm software compatibility. I2C address configuration may differ between components.

Q: What is the supply voltage compatibility between these parts?

A: APDS-9130 operates at 2.2V – 3.6V. APDS-9160-003 operates at 1.7V – 3.6V. The overlap range is 2.2V – 3.6V, ensuring compatibility within this window. Designs operating below 2.2V require APDS-9160-003 evaluation.

Q: Are there environmental or compliance differences?

A: Both components are ROHS3 compliant with MSL 3 rating (168 hours). APDS-9160-003 extends the operating temperature range to -40°C minimum versus -30°C for APDS-9130, providing enhanced cold-temperature performance.

Q: What packaging formats are available for APDS-9160-003?

A: APDS-9160-003 is supplied in Tape & Reel (TR) packaging. APDS-9130 packaging format is not specified in the provided data. Confirm packaging requirements for production assembly processes.