APAMBJ-145 RF Antenna Equivalent & Substitute Parts

Part Overview

The APAMBJ-145 is a dual-band dome RF antenna manufactured by Abracon LLC, designed for 2.4GHz and 5.8GHz Bluetooth and Wi-Fi applications. This antenna operates across the frequency range of 5.1GHz to 5.9GHz with SMA Male panel mount termination and includes a 2.5m cable. The product is Active status and ROHS3 compliant.

Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained across the specified frequency bands, antenna type, termination style, and mounting configuration.

Key Parameters

Parameter	APAMBJ-145
Manufacturer	Abracon LLC
Antenna Type	Dome
Frequency (Center/Band)	2.4GHz, 5.8GHz
Frequency Range	5.1GHz ~ 5.9GHz
Number of Bands	2
Gain	5dBi, 2dBi
VSWR	2
Termination	SMA Male
Mounting Type	Panel Mount
Height (Max)	1.437" (36.50mm)
RF Family/Standard	Bluetooth, WiFi
RoHS Status	ROHS3 Compliant
Product Status	Active

Substitute Part Grouping Explanation

Substitution analysis for the APAMBJ-145 is constrained by the following critical parameters:

Frequency Coverage: The main part operates at 2.4GHz and 5.8GHz with a range of 5.1GHz to 5.9GHz. Substitute parts must support these specific frequency bands.
Antenna Type: Dome configuration is required for form factor and radiation pattern compatibility.
Termination: SMA Male connector is mandatory for interface compatibility.
Mounting: Panel mount configuration must be maintained.
Electrical Performance: VSWR of 2 and gain specifications (5dBi, 2dBi) define acceptable performance boundaries.

The substitute parts provided in the manufacturer list (A.30.A.301111, TLS.01.305111, MA104.C.AB.015, MA106.C.LB.001, MA510.C.CG.005) operate in different frequency bands (GPS/GLONASS navigation, cellular, and sub-GHz ISM bands). These parts do not meet the frequency coverage requirement for 2.4GHz/5.8GHz Bluetooth and Wi-Fi applications and therefore cannot serve as direct electrical substitutes for the APAMBJ-145.

Parameter Comparison

Parameter	APAMBJ-145	A.30.A.301111	A.41.A.301111	G24.A.305111	G24.A.W.305111	MA104.C.AB.015	MA106.C.LB.001	MA111.C.LB.001	MA130.A.LP.002	MA131.A.LK.002	MA410.A.LBIJ.001
Manufacturer	Abracon LLC	Taoglas Limited	Taoglas Limited	Taoglas Limited	Taoglas Limited	Taoglas Limited	Taoglas Limited	Taoglas Limited	Taoglas Limited	Taoglas Limited	Taoglas Limited
Antenna Type	Dome	Dome	Dome	Dome	Dome	Dome	Dome	Dome	Dome	Dome	Flat Bar
Frequency (Center/Band)	2.4GHz, 5.8GHz	1.575GHz, 1.602GHz	1.575GHz, 1.602GHz	850MHz, 900MHz, 1.8GHz, 1.9GHz, 2.1GHz	850MHz, 900MHz, 1.8GHz, 1.9GHz, 2.1GHz	892MHz, 1.9GHz	892MHz, 1.94GHz	850MHz, 900MHz, 1.575GHz, 1.602GHz, 1.8GHz, 1.9GHz, 2.1GHz	868MHz, 1.575GHz	915MHz, 1.575GHz, 1.602GHz	700MHz, 850MHz, 900MHz, 1.561GHz, 1.575GHz, 1.602GHz, 1.8GHz, 1.9GHz, 2.1GHz, 2.5GHz, 4.6GHz
Termination	SMA Male	SMA Male	SMA Male	SMA Male	SMA Male	SMA Male	SMA Male	SMA Male (2)	SMA Male	SMA Male (2)	SMA Male (4)
Mounting Type	Panel Mount	Panel Mount	Panel Mount	Panel Mount	Panel Mount	Panel Mount	Panel Mount	Panel Mount	Panel Mount	Panel Mount	Panel Mount
VSWR	2	2	2	-	-	4.6	4.6	2.5, 2, 2, 4.6, 3, 3	2	2	2, 4.6
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

All listed substitute parts maintain Active product status and ROHS3 compliance, consistent with the APAMBJ-145. However, frequency band coverage is the determining factor for substitution viability.

The APAMBJ-145 is optimized for 2.4GHz and 5.8GHz operation, serving Bluetooth and Wi-Fi applications. The substitute parts listed operate in alternative frequency bands:

A.30.A.301111 and A.41.A.301111: GPS/GLONASS navigation (1.575GHz, 1.602GHz)
G24.A.305111 and G24.A.W.305111: Cellular bands (850MHz, 900MHz, 1.8GHz, 1.9GHz, 2.1GHz)
MA104.C.AB.015 and MA106.C.LB.001: Cellular and navigation (892MHz, 1.9GHz, 1.94GHz)
MA111.C.LB.001: Multi-band cellular and navigation (850MHz through 2.1GHz)
MA130.A.LP.002 and MA131.A.LK.002: Sub-GHz ISM and navigation (868MHz, 915MHz, 1.575GHz)
MA410.A.LBIJ.001: Wide-band cellular and navigation (698MHz through 4.6GHz)

None of these alternatives provide the specific 2.4GHz/5.8GHz frequency coverage required for Bluetooth and Wi-Fi applications. Selection of any substitute part requires confirmation that the target application can operate within the alternative frequency bands provided by that part.

Frequently Asked Questions (FAQ)

Q: Can the listed substitute parts replace the APAMBJ-145 in a Bluetooth/Wi-Fi application?

A: No. The substitute parts operate in different frequency bands (GPS/GLONASS, cellular, or sub-GHz ISM). The APAMBJ-145 is specifically designed for 2.4GHz and 5.8GHz operation. Substitution requires an application redesign to operate in the frequency bands supported by the alternative antenna.

Q: What are the critical parameters that determine antenna substitution?

A: Frequency band coverage, antenna type (dome), termination connector (SMA Male), mounting configuration (panel mount), and electrical performance (VSWR, gain) must align between the original and substitute part. The APAMBJ-145 requires 2.4GHz and 5.8GHz support, which none of the listed alternatives provide.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All parts listed, including the APAMBJ-145, are ROHS3 compliant and maintain Active product status.

Q: What is the significance of VSWR matching?

A: VSWR (Voltage Standing Wave Ratio) indicates impedance matching efficiency. The APAMBJ-145 specifies VSWR of 2. Substitute parts with higher VSWR values (such as 4.6) indicate greater impedance mismatch and potential performance degradation in the target frequency band.

Q: Can panel mount height differences affect substitution?

A: Yes. The APAMBJ-145 has a maximum height of 1.437" (36.50mm). Substitute parts with different heights may not fit within the same mechanical envelope. Height compatibility must be verified for the specific application.

Q: What does "Number of Bands" indicate?

A: This parameter specifies how many distinct frequency bands the antenna supports. The APAMBJ-145 supports 2 bands (2.4GHz and 5.8GHz). Multi-band antennas may introduce unwanted resonances or performance trade-offs in specific bands.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message