AP9214L-AH-HSBR-7 Equivalent & Substitute Parts

Part Overview

The AP9214L-AH-HSBR-7 is a Battery Protection IC for single-cell Lithium Ion/Polymer applications manufactured by Diodes Incorporated. This Surface Mount device in 6-UDFN Exposed Pad packaging provides over-current, over-voltage, and short-circuit protection. The part is currently Active in product status with 1015 units in stock. Equivalent and substitute parts are necessary when the primary part becomes unavailable, when alternative packaging formats are required, or when inventory constraints necessitate component alternatives that maintain identical electrical and mechanical specifications.

Key Parameters

Parameter	Value
Manufacturer	Diodes Incorporated
Category	Power Management (PMIC)
Function	Battery Protection
Battery Chemistry	Lithium Ion/Polymer
Number of Cells	1
Fault Protection	Over Current, Over Voltage, Short Circuit
Operating Temperature	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount
Package / Case	6-UDFN Exposed Pad
Supplier Device Package	U-DFN2535-6
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
REACH Status	REACH Unaffected

Substitute Part Grouping Explanation

Substitution of the AP9214L-AH-HSBR-7 is determined by strict equivalence across the following parameters:

Battery Chemistry: Lithium Ion/Polymer
Number of Cells: 1
Fault Protection: Over Current, Over Voltage, Short Circuit
Operating Temperature Range: -40°C ~ 85°C (TA)
Mounting Type: Surface Mount
Package / Case: 6-UDFN Exposed Pad
Supplier Device Package: U-DFN2535-6
RoHS Status: ROHS3 Compliant
Moisture Sensitivity Level: 1 (Unlimited)
REACH Status: REACH Unaffected

All substitute parts listed maintain identical electrical specifications and mechanical compatibility. Packaging format (Tape & Reel or Cut Tape) and product status variations do not affect functional equivalence.

Parameter Comparison

Part Number	Manufacturer	Packaging	Product Status	Battery Chemistry	Cells	Fault Protection	Operating Temp	Package Type	Inventory (Pcs)	RoHS Status
AP9214L-AH-HSBR-7	Diodes Incorporated	Tape & Reel (TR)	Active	Lithium Ion/Polymer	1	Over Current, Over Voltage, Short Circuit	-40°C ~ 85°C	6-UDFN Exposed Pad	1015	ROHS3 Compliant
AP9214L-AK-HSBR-7	Diodes Incorporated	Cut Tape (CT)	Obsolete	Lithium Ion/Polymer	1	Over Current, Over Voltage, Short Circuit	-40°C ~ 85°C	6-UDFN Exposed Pad	9600	ROHS3 Compliant
AP9214L-AN-HSB-7	Diodes Incorporated	Tape & Reel (TR)	Obsolete	Lithium Ion/Polymer	1	Over Current, Over Voltage, Short Circuit	-40°C ~ 85°C	6-UDFN Exposed Pad	3898	ROHS3 Compliant
AP9214LA-AH-HSB-7	Diodes Incorporated	Tape & Reel (TR)	Obsolete	Lithium Ion/Polymer	1	Over Current, Over Voltage, Short Circuit	-40°C ~ 85°C	6-UDFN Exposed Pad	5378	ROHS3 Compliant
AP9214LA-AM-HSBR-7	Diodes Incorporated	Tape & Reel (TR)	Obsolete	Lithium Ion/Polymer	1	Over Current, Over Voltage, Short Circuit	-40°C ~ 85°C	6-UDFN Exposed Pad	3999	ROHS3 Compliant

Engineering Selection Recommendations

The AP9214L-AH-HSBR-7 is the recommended primary selection due to Active product status and established supply availability. All listed substitute parts maintain full electrical and mechanical compatibility with identical fault protection capabilities and operating specifications.

For applications requiring immediate availability, AP9214L-AK-HSBR-7 offers the highest inventory level (9600 units) with identical electrical performance. This part differs only in packaging format (Cut Tape versus Tape & Reel) and obsolete product status.

AP9214L-AN-HSB-7 and AP9214LA-AH-HSB-7 provide alternative Tape & Reel packaging options with adequate inventory levels. AP9214LA-AM-HSBR-7 offers Tape & Reel packaging with Tape & Reel format compatibility.

All substitute parts carry ROHS3 compliance and REACH Unaffected status, meeting regulatory requirements equivalent to the primary part.

Frequently Asked Questions (FAQ)

Q: Can AP9214L-AK-HSBR-7 be used as a direct replacement for AP9214L-AH-HSBR-7?

A: Yes. Both parts are electrically and mechanically equivalent. The primary difference is packaging format: AP9214L-AK-HSBR-7 is supplied in Cut Tape (CT) format while AP9214L-AH-HSBR-7 is supplied in Tape & Reel (TR) format. Functional performance and pin compatibility are identical.

Q: What is the significance of the product status difference between Active and Obsolete parts?

A: Product status indicates lifecycle phase. Active parts (AP9214L-AH-HSBR-7) are in current production with ongoing manufacturer support. Obsolete parts remain functionally equivalent but are no longer manufactured. Selection should prioritize Active status when available for long-term supply assurance.

Q: Are all substitute parts compatible with the same PCB layout?

A: Yes. All substitute parts use identical 6-UDFN Exposed Pad packaging (U-DFN2535-6 supplier device package) with matching pin configurations and mechanical dimensions. PCB layout and footprint remain unchanged across all listed equivalents.

Q: What determines whether a part qualifies as a substitute for the AP9214L-AH-HSBR-7?

A: Substitution is based on strict equivalence across battery chemistry (Lithium Ion/Polymer), cell count (1), fault protection capabilities (Over Current, Over Voltage, Short Circuit), operating temperature range (-40°C ~ 85°C), package type (6-UDFN Exposed Pad), and regulatory compliance (ROHS3, REACH Unaffected).

Q: Can parts with different packaging formats be mixed in the same production run?

A: Functionally yes, as electrical and mechanical specifications are identical. However, manufacturing processes may differ between Tape & Reel and Cut Tape formats. Verify with your assembly partner regarding handling and placement equipment compatibility.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message