AP9214L-AE-HSBR-7 Equivalent & Substitute Parts

Part Overview

The AP9214L-AE-HSBR-7 is a Battery Protection IC for single-cell Lithium Ion/Polymer applications manufactured by Diodes Incorporated. This Power Management (PMIC) component provides fault protection against over-current, over-voltage, and short-circuit conditions in a 6-UDFN Exposed Pad surface-mount package. The part is currently in Active product status with 9200 units in stock. Substitute parts are necessary when the primary part becomes unavailable, when alternative packaging formats are required, or when design revisions necessitate component qualification with equivalent functional specifications.

Substiute Parts

AP9214L-AE-HSBR-7

Diodes IncorporatedIn Stock: 9212AP9214L-AE-HSBR-7 Datasheet

Current PartRFQ

AP9214L-AK-HSBR-7

Diodes IncorporatedIn Stock: 9661AP9214L-AK-HSBR-7 Datasheet

Parametric EquivalentRFQ

AP9214L-AN-HSB-7

Diodes IncorporatedIn Stock: 3911AP9214L-AN-HSB-7 Datasheet

Parametric EquivalentRFQ

AP9214LA-AH-HSB-7

Diodes IncorporatedIn Stock: 5400AP9214LA-AH-HSB-7 Datasheet

Parametric EquivalentRFQ

AP9214LA-AM-HSBR-7

Diodes IncorporatedIn Stock: 4098AP9214LA-AM-HSBR-7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the AP9214L-AE-HSBR-7 is determined by strict equivalence across the following parameters:

• Functional Equivalence: All substitute parts maintain identical Battery Protection function for single-cell Lithium Ion/Polymer applications with Over Current, Over Voltage, and Short Circuit fault protection.
• Electrical Specifications: Operating temperature range remains -40°C ~ 85°C (TA) across all equivalents.
• Package Compatibility: All parts use the 6-UDFN Exposed Pad package (U-DFN2535-6) with Surface Mount mounting type, ensuring PCB layout compatibility.
• Regulatory Compliance: All parts maintain ROHS3 Compliant status, REACH Unaffected designation, and MSL 1 (Unlimited) moisture sensitivity level.
• Packaging Format Variation: Substitute parts differ only in packaging format (Tape & Reel versus Cut Tape) and product status (Active versus Obsolete), which do not affect electrical or mechanical compatibility.

The following parts are parametric equivalents of AP9214L-AE-HSBR-7:

• AP9214L-AK-HSBR-7 (Cut Tape packaging, Obsolete status)
• AP9214L-AN-HSB-7 (Tape & Reel packaging, Obsolete status)
• AP9214LA-AH-HSB-7 (Tape & Reel packaging, Obsolete status)
• AP9214LA-AM-HSBR-7 (Tape & Reel packaging, Obsolete status)

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: AP9214L-AE-HSBR-7 remains the recommended choice for new designs due to its Active product status, ensuring long-term availability and manufacturing support from Diodes Incorporated.

Substitute Selection Criteria:

• For Tape & Reel Packaging Requirement: AP9214L-AN-HSB-7, AP9214LA-AH-HSB-7, or AP9214LA-AM-HSBR-7 provide equivalent functionality with Tape & Reel packaging format. Note that these parts carry Obsolete product status, indicating limited future availability.

• For Cut Tape Packaging Requirement: AP9214L-AK-HSBR-7 provides equivalent functionality with Cut Tape packaging format. This part also carries Obsolete product status.

• Compliance Assurance: All substitute parts maintain identical ROHS3 Compliant status and REACH Unaffected designation, ensuring regulatory compliance equivalence with the primary part.

• Moisture Sensitivity: All parts share MSL 1 (Unlimited) rating, eliminating moisture-related handling and storage constraints.

Inventory Consideration: AP9214L-AK-HSBR-7 offers the highest inventory availability (9600 units) among substitute options, followed by AP9214LA-AH-HSB-7 (5378 units).

Frequently Asked Questions (FAQ)

Q: Can AP9214L-AK-HSBR-7 be used as a direct replacement for AP9214L-AE-HSBR-7?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, operating temperature range, fault protection capabilities, and 6-UDFN Exposed Pad package. The only difference is packaging format: AP9214L-AE-HSBR-7 uses Tape & Reel while AP9214L-AK-HSBR-7 uses Cut Tape. PCB assembly compatibility is maintained.

Q: Why are some substitute parts marked as Obsolete?

A: Product status reflects manufacturer lifecycle designation. Obsolete parts may have limited future availability but remain functionally equivalent for current applications. For long-term production programs, AP9214L-AE-HSBR-7 (Active status) is recommended.

Q: Are there electrical performance differences between the substitute parts?

A: No. All listed parts provide identical Battery Protection function for single-cell Lithium Ion/Polymer applications with Over Current, Over Voltage, and Short Circuit fault protection across the -40°C ~ 85°C operating temperature range.

Q: Does packaging format affect PCB layout or assembly?

A: Packaging format (Tape & Reel versus Cut Tape) affects component delivery and handling but not PCB layout or assembly. All parts use the same 6-UDFN Exposed Pad package footprint and Surface Mount mounting type.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 Compliant status and REACH Unaffected designation, ensuring regulatory equivalence with AP9214L-AE-HSBR-7.

Q: What is the significance of MSL 1 (Unlimited) rating?

A: MSL 1 (Unlimited) indicates the component has no moisture sensitivity constraints. Standard moisture-controlled storage and handling procedures are not required, simplifying logistics and inventory management.