AP9214L-AA-HSBR-7 Equivalent & Substitute Parts

Part Overview

The AP9214L-AA-HSBR-7 is a Battery Protection IC for single-cell Lithium Ion/Polymer applications manufactured by Diodes Incorporated. This Surface Mount device in 6-UDFN Exposed Pad packaging provides Over Current, Over Voltage, and Short Circuit protection. The part is currently Active in product status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1).

Substitute parts are necessary when the primary part reaches end-of-life status, inventory constraints occur, or alternative packaging formats are required for manufacturing flexibility.

Substiute Parts

AP9214L-AA-HSBR-7

Diodes IncorporatedIn Stock: 1028AP9214L-AA-HSBR-7 Datasheet

Current PartRFQ

AP9214L-AK-HSBR-7

Diodes IncorporatedIn Stock: 9661AP9214L-AK-HSBR-7 Datasheet

Parametric EquivalentRFQ

AP9214L-AN-HSB-7

Diodes IncorporatedIn Stock: 3911AP9214L-AN-HSB-7 Datasheet

Parametric EquivalentRFQ

AP9214LA-AH-HSB-7

Diodes IncorporatedIn Stock: 5400AP9214LA-AH-HSB-7 Datasheet

Parametric EquivalentRFQ

AP9214LA-AM-HSBR-7

Diodes IncorporatedIn Stock: 4098AP9214LA-AM-HSBR-7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AP9214L-AA-HSBR-7 is determined by the following parameters:

Critical Parameters (Must Match):

• Battery Chemistry: Lithium Ion/Polymer
• Number of Cells: 1
• Fault Protection: Over Current, Over Voltage, Short Circuit
• Package / Case: 6-UDFN Exposed Pad
• Supplier Device Package: U-DFN2535-6
• Operating Temperature Range: -40°C ~ 85°C (TA)
• Mounting Type: Surface Mount
• RoHS Status: ROHS3 Compliant

Variable Parameters (Allowed to Differ):

• Packaging Format: Tape & Reel (TR) or Cut Tape (CT)
• Product Status: Active or Obsolete
• Inventory Availability

All qualified substitutes maintain identical electrical and mechanical specifications while differing only in packaging delivery format and product lifecycle status.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection (Active Status): AP9214L-AA-HSBR-7 remains the preferred choice for new designs. This part maintains Active product status with confirmed ROHS3 compliance and unlimited moisture sensitivity rating.

Secondary Selection (Obsolete Status with Available Inventory): AP9214L-AK-HSBR-7, AP9214L-AN-HSB-7, AP9214LA-AH-HSB-7, and AP9214LA-AM-HSBR-7 are electrically and mechanically equivalent substitutes. These parts are classified as Obsolete but maintain full ROHS3 compliance and REACH Unaffected status. Selection among these alternatives depends on packaging format requirements:

• Cut Tape (CT) format: AP9214L-AK-HSBR-7
• Tape & Reel (TR) format: AP9214L-AN-HSB-7, AP9214LA-AH-HSB-7, or AP9214LA-AM-HSBR-7

All substitutes share identical electrical protection characteristics, operating temperature range, and package dimensions, ensuring direct functional replacement in existing PCB designs.

Frequently Asked Questions (FAQ)

Q: Can AP9214L-AK-HSBR-7 replace AP9214L-AA-HSBR-7 in production? A: Yes. Both parts are electrically and mechanically identical. The primary difference is packaging format: AP9214L-AK-HSBR-7 uses Cut Tape (CT) delivery while AP9214L-AA-HSBR-7 uses Tape & Reel (TR). Verify your assembly equipment compatibility with the selected packaging format.

Q: Why are some substitute parts marked Obsolete? A: Obsolete status indicates the manufacturer has discontinued active production. However, these parts remain functionally equivalent and are available through existing inventory channels. They maintain full compliance certifications and are suitable for production use.

Q: Are all substitutes ROHS3 compliant? A: Yes. All listed substitute parts carry ROHS3 Compliant status and REACH Unaffected designation, meeting current environmental and regulatory requirements.

Q: What is the difference between Tape & Reel and Cut Tape packaging? A: Tape & Reel (TR) packaging provides continuous reel format suitable for high-speed automated assembly. Cut Tape (CT) packaging provides individual tape segments for lower-volume or manual assembly processes. Both formats contain identical components in the same 6-UDFN Exposed Pad package.

Q: Can I mix packaging formats in a single production run? A: Packaging format selection should align with your assembly equipment capabilities. Mixing formats within a single production run may require equipment reconfiguration and is not recommended without process validation.

Q: Are there any electrical performance differences between substitute parts? A: No. All substitute parts provide identical Over Current, Over Voltage, and Short Circuit protection for single-cell Lithium Ion/Polymer batteries with the same -40°C ~ 85°C operating temperature range.