AP7365-33ERG-13 Equivalent & Substitute Parts

Part Overview

The AP7365-33ERG-13 is a linear voltage regulator IC from Diodes Incorporated designed for positive fixed 3.3V output applications. This Surface Mount device delivers 600mA output current with a maximum dropout voltage of 0.4V at rated load, making it suitable for low-power supply regulation in embedded systems and portable electronics. The part is Active status and ROHS3 compliant, with unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when packaging or distribution format differs while maintaining identical electrical performance and mechanical compatibility.

Substiute Parts

AP7365-33ERG-13

Diodes IncorporatedIn Stock: 8142AP7365-33ERG-13 Datasheet

Current PartRFQ

AP7365-33EG-13

Diodes IncorporatedIn Stock: 98623AP7365-33EG-13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the AP7365-33ERG-13 is determined by equivalence in the following critical parameters:

• Output voltage specification (3.3V fixed)
• Output current capability (600mA)
• Maximum input voltage rating (6V)
• Dropout voltage performance (0.4V @ 600mA)
• Quiescent current draw (80 µA)
• PSRR performance (65dB at 1kHz)
• Operating temperature range (-40°C ~ 85°C)
• Surface Mount package compatibility (SOT-223 family)
• Protection feature set (Over Current, Over Temperature)
• Regulatory compliance (ROHS3, REACH Unaffected)

The identified substitute part AP7365-33EG-13 maintains identical electrical specifications and differs only in packaging format (Cut Tape & Digi-Reel versus Tape & Reel distribution).

Parameter Comparison

Engineering Selection Recommendations

Both AP7365-33ERG-13 and AP7365-33EG-13 are Active products from Diodes Incorporated with identical electrical and thermal specifications. Selection between these parts is based on procurement and inventory requirements rather than functional performance.

The AP7365-33ERG-13 is supplied in Tape & Reel format, suitable for high-volume automated assembly operations. The AP7365-33EG-13 is supplied in Cut Tape and Digi-Reel format, appropriate for lower-volume applications or when component-level flexibility is required.

Both parts maintain ROHS3 compliance and REACH Unaffected status, meeting regulatory requirements for industrial and consumer applications. The identical PSRR, dropout voltage, and protection features ensure functional interchangeability in circuit designs.

Frequently Asked Questions (FAQ)

Q: Are AP7365-33ERG-13 and AP7365-33EG-13 electrically identical?

A: Yes. Both parts deliver 3.3V at 600mA with 0.4V maximum dropout voltage, 80 µA quiescent current, and 65dB PSRR. Electrical performance is identical across all specified parameters.

Q: What is the difference between these parts?

A: The primary difference is packaging format. AP7365-33ERG-13 uses Tape & Reel distribution, while AP7365-33EG-13 uses Cut Tape and Digi-Reel format. The physical component package (SOT-223 family) remains compatible.

Q: Can I use AP7365-33EG-13 as a direct replacement for AP7365-33ERG-13?

A: Yes, for circuit design and functional application. The component is mechanically and electrically equivalent. Verify that your assembly process accommodates the different packaging format.

Q: Are both parts suitable for -40°C to 85°C operating environments?

A: Yes. Both parts are rated for -40°C to 85°C operation and include Over Current and Over Temperature protection.

Q: Do both parts meet RoHS compliance requirements?

A: Yes. Both AP7365-33ERG-13 and AP7365-33EG-13 are ROHS3 compliant and REACH Unaffected.