AP7365-25YG-13 Equivalent & Substitute Parts

Part Overview

The AP7365-25YG-13 is a linear voltage regulator IC from Diodes Incorporated designed for positive fixed output applications. This Surface Mount device delivers 600mA output current at a fixed 2.5V output with a maximum dropout voltage of 0.4V at full load. The part is Active status and widely used in power management applications requiring stable low-voltage regulation. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained across the specified parameter range.

Substiute Parts

AP7365-25YG-13

Diodes IncorporatedIn Stock: 8501AP7365-25YG-13 Datasheet

Current PartRFQ

AP7365-25YRG-13

Diodes IncorporatedIn Stock: 15224AP7365-25YRG-13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The AP7365-25YG-13 has one identified parametric equivalent: AP7365-25YRG-13. This substitute relationship is established based on the following criteria:

Electrical Parameter Equivalence:

• Identical output voltage: 2.5V fixed
• Identical output current rating: 600mA
• Identical maximum input voltage: 6V
• Identical dropout voltage specification: 0.4V @ 600mA
• Identical quiescent current: 80 µA
• Identical PSRR: 65dB (1kHz)
• Identical protection features: Over Current, Over Temperature
• Identical operating temperature range: -40°C ~ 85°C

Mechanical & Packaging Equivalence:

• Identical package type: TO-243AA
• Identical mounting type: Surface Mount
• Both from same manufacturer: Diodes Incorporated
• Both Active product status

Compliance Equivalence:

• Both ROHS3 Compliant
• Both MSL 1 (Unlimited)
• Both REACH Unaffected

The only difference between these parts is the supplier device package designation (SOT-89-3 versus SOT-89R-3), which represents a packaging variant within the same physical form factor and does not affect electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the AP7365-25YG-13 and AP7365-25YRG-13 are Active products from Diodes Incorporated with full ROHS3 compliance and REACH unaffected status. Selection between these parts should be based on availability and supply chain requirements, as they are electrically and mechanically equivalent. The AP7365-25YRG-13 currently has higher inventory availability (15,200 pcs versus 8,485 pcs), which may influence procurement decisions. Both parts meet identical electrical specifications and are suitable for direct substitution in applications requiring a 2.5V, 600mA linear regulator with TO-243AA packaging.

Frequently Asked Questions (FAQ)

Q: Can AP7365-25YRG-13 be used as a direct replacement for AP7365-25YG-13?

A: Yes. Both parts are electrically and mechanically equivalent with identical output voltage, current rating, dropout voltage, quiescent current, PSRR, protection features, and operating temperature range. The difference in supplier device package designation (SOT-89-3 versus SOT-89R-3) does not affect compatibility.

Q: What is the difference between SOT-89-3 and SOT-89R-3 packaging?

A: Both designations refer to the same physical TO-243AA package form factor used for Surface Mount applications. The "R" designation in SOT-89R-3 represents a packaging variant within the same mechanical specification and does not impact pin configuration, footprint, or electrical performance.

Q: Are both parts suitable for the same PCB layout and footprint?

A: Yes. Both AP7365-25YG-13 and AP7365-25YRG-13 use identical TO-243AA packaging with Surface Mount mounting type, requiring the same PCB footprint and layout considerations.

Q: What compliance certifications apply to these parts?

A: Both parts are ROHS3 Compliant, REACH Unaffected, with MSL 1 (Unlimited) moisture sensitivity rating. Both maintain Active product status.

Q: Is there a performance difference in dropout voltage or quiescent current between these substitutes?

A: No. Both parts specify identical maximum dropout voltage of 0.4V at 600mA and identical quiescent current of 80 µA, ensuring equivalent performance in power management applications.