AP7365-10YG-13 Equivalent & Substitute Parts

Part Overview

The AP7365-10YG-13 is a linear voltage regulator IC from Diodes Incorporated designed for positive fixed 1V output applications. This Surface Mount device delivers 600mA output current in a compact SOT-89-3 package and is classified as Active product status. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required for design flexibility, inventory management, or supply chain continuity.

Substiute Parts

AP7365-10YG-13

Diodes IncorporatedIn Stock: 3517AP7365-10YG-13 Datasheet

Current PartRFQ

AP7365-10YRG-13

Diodes IncorporatedIn Stock: 9477AP7365-10YRG-13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The AP7365-10YG-13 has one identified parametric equivalent: AP7365-10YRG-13. Substitution is valid based on the following criteria:

• Identical output voltage specification (1V fixed)
• Identical output current rating (600mA)
• Identical maximum input voltage (6V)
• Identical voltage dropout characteristic (0.6V @ 600mA)
• Identical quiescent current (80 µA)
• Identical PSRR performance (65dB at 1kHz)
• Identical operating temperature range (-40°C ~ 85°C)
• Identical protection features (Over Current, Over Temperature)
• Same manufacturer (Diodes Incorporated)
• Same base product number (AP7365)
• Identical RoHS and REACH compliance status
• Identical MSL rating (1 - Unlimited)

The primary difference between these parts is the package variant designation: SOT-89-3 versus SOT-89R-3, both housed in TO-243AA mechanical form factor.

Parameter Comparison

Engineering Selection Recommendations

Both AP7365-10YG-13 and AP7365-10YRG-13 are Active status products from Diodes Incorporated with full ROHS3 compliance and REACH unaffected status. Selection between these parts is determined by packaging availability and supply chain requirements rather than electrical performance differences. Both parts meet identical electrical specifications and thermal operating requirements. The SOT-89R-3 variant (AP7365-10YRG-13) currently maintains higher inventory availability at 9400 pieces compared to 3455 pieces for the SOT-89-3 variant (AP7365-10YG-13).

Frequently Asked Questions (FAQ)

Q: Can AP7365-10YRG-13 be used as a direct replacement for AP7365-10YG-13?

A: Yes. Both parts deliver identical electrical performance across all specified parameters including output voltage, current rating, dropout voltage, quiescent current, and PSRR. The mechanical form factor (TO-243AA) is identical. The package designation difference (SOT-89-3 vs SOT-89R-3) reflects supplier packaging variants of the same physical component.

Q: Are there any thermal or performance differences between these substitutes?

A: No. Both parts operate across the identical temperature range (-40°C ~ 85°C) and provide identical protection features (Over Current, Over Temperature). Quiescent current, dropout voltage, and PSRR specifications are matched.

Q: What is the significance of the SOT-89-3 versus SOT-89R-3 designation?

A: Both designations refer to the same physical package form factor (TO-243AA) used for Surface Mount applications. The "R" designation in SOT-89R-3 indicates a specific supplier packaging or tape reel configuration variant. Electrical and mechanical compatibility remains unchanged.

Q: Are both parts RoHS compliant?

A: Yes. Both AP7365-10YG-13 and AP7365-10YRG-13 are ROHS3 compliant with MSL rating of 1 (Unlimited moisture sensitivity level).

Q: Which part should be selected for new designs?

A: Selection is based on supply chain availability and packaging preference. Both parts are Active status and suitable for new designs. Verify current inventory status with your supplier for lead time and availability considerations.