AP7361C-12E-13 Equivalent & Substitute Parts

Part Overview

The AP7361C-12E-13 is a linear voltage regulator IC from Diodes Incorporated, classified as a Power Management (PMIC) component. This positive fixed output regulator delivers 1A at 1.2V and operates across an input range up to 6V, with a maximum dropout voltage of 0.7V at full load. The device is actively produced and widely stocked, with 1094 units available in new original condition. Substitute parts are identified when design requirements necessitate alternative sourcing due to inventory constraints, supply chain considerations, or specific application parameters.

Substiute Parts

AP7361C-12E-13

Diodes IncorporatedIn Stock: 1116AP7361C-12E-13 Datasheet

Current PartRFQ

AP2114H-1.2TRG1

Diodes IncorporatedIn Stock: 28633AP2114H-1.2TRG1 Datasheet

Parametric EquivalentRFQ

AP2114HA-1.2TRG1

Diodes IncorporatedIn Stock: 65118AP2114HA-1.2TRG1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the AP7361C-12E-13 are qualified based on the following critical parameters that determine functional equivalence:

• Output voltage: 1.2V fixed
• Output current capability: 1A
• Maximum input voltage: 6V
• Package type: SOT-223-3
• Output configuration: Positive fixed
• Protection features: Over Current and Over Temperature
• Operating temperature range: -40°C ~ 85°C
• Regulatory compliance: ROHS3 Compliant

The substitute parts AP2114H-1.2TRG1 and AP2114HA-1.2TRG1 meet these core electrical and mechanical requirements. Differences in dropout voltage and quiescent current specifications are within acceptable tolerances for linear regulator substitution in applications where the main part is unavailable.

Parameter Comparison

Engineering Selection Recommendations

All three parts—AP7361C-12E-13, AP2114H-1.2TRG1, and AP2114HA-1.2TRG1—are active products from Diodes Incorporated with ROHS3 compliance and identical regulatory status (REACH Unaffected, ECCN EAR99). The AP2114H-1.2TRG1 and AP2114HA-1.2TRG1 are direct parametric equivalents suitable for applications where the primary part is unavailable. Both substitute parts are available in significantly higher quantities (28,607 and 65,052 units respectively) compared to the main part (1,094 units), making them viable alternatives for high-volume production requirements.

Frequently Asked Questions (FAQ)

Q: Can AP2114H-1.2TRG1 or AP2114HA-1.2TRG1 be used as direct replacements for AP7361C-12E-13?

A: Yes. Both substitute parts deliver identical output voltage (1.2V) and current (1A) with matching package type (SOT-223-3), operating temperature range (-40°C ~ 85°C), and protection features. The primary difference is dropout voltage: the AP7361C-12E-13 specifies 0.7V maximum, while the substitutes specify 1.3V maximum at 1A. Applications with sufficient input voltage margin can accommodate this difference.

Q: What is the difference between AP2114H-1.2TRG1 and AP2114HA-1.2TRG1?

A: Both parts are electrically identical with matching output voltage, current, dropout voltage, and quiescent current specifications. The primary distinction is inventory availability: AP2114HA-1.2TRG1 has 65,052 units in stock compared to 28,607 units for AP2114H-1.2TRG1.

Q: Are there any compliance or certification differences between these parts?

A: No. All three parts carry identical regulatory certifications: ROHS3 Compliant, REACH Unaffected, and ECCN EAR99 classification.

Q: What is the impact of the higher dropout voltage in the substitute parts?

A: The AP2114H-1.2TRG1 and AP2114HA-1.2TRG1 require 0.6V additional input voltage headroom compared to the AP7361C-12E-13 to maintain regulation at 1A output current. Circuit designs must verify that available input voltage exceeds the output voltage plus the specified dropout voltage.

Q: Are the package dimensions identical across all three parts?

A: Yes. All three parts use the SOT-223-3 package with identical mechanical specifications and pinout configuration, enabling direct PCB layout compatibility.