AP7353-30CV4-7 Equivalent & Substitute Parts

Part Overview

The AP7353-30CV4-7 is a linear voltage regulator IC from Diodes Incorporated, classified as a Power Management (PMIC) component. This device delivers a fixed 3V positive output with 250mA current capacity and is designed for surface mount applications in the 4-XFBGA, WLBGA package format. The part is currently active in production status with 760 units in stock. Alternative equivalent parts may be required due to inventory constraints, supply chain considerations, or specific manufacturing lot requirements.

Substiute Parts

AP7353-30CV4-7

Diodes IncorporatedIn Stock: 870AP7353-30CV4-7 Datasheet

Current PartRFQ

AP7353D-30CV4-7

Diodes IncorporatedIn Stock: 4263AP7353D-30CV4-7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the AP7353-30CV4-7 is determined by strict equivalence across the following critical parameters:

• Output voltage specification: 3V fixed
• Output current capacity: 250mA
• Input voltage maximum rating: 5.5V
• Voltage dropout characteristic: 0.147V @ 250mA
• Package format: 4-XFBGA, WLBGA (X1-WLB0707-4 Type A1)
• Mounting configuration: Surface Mount
• Control and protection features: Enable control, Over Current, Over Temperature, Short Circuit protection
• Operating temperature range: -40°C ~ 85°C

The AP7353D-30CV4-7 meets all these criteria and is classified as a parametric equivalent. Both parts share identical electrical specifications, output configuration, and package designation, differing only in manufacturing lot designation and moisture sensitivity level classification.

Parameter Comparison

Engineering Selection Recommendations

Both the AP7353-30CV4-7 and AP7353D-30CV4-7 are active production parts from Diodes Incorporated with full ROHS3 compliance and REACH unaffected status. The parts are electrically and functionally identical across all specified parameters. Selection between these parts is based on inventory availability and moisture sensitivity level requirements. The AP7353-30CV4-7 carries MSL 1 classification (unlimited moisture exposure tolerance), while the AP7353D-30CV4-7 carries MSL 3 classification (168-hour moisture exposure limit). Applications requiring extended storage or exposure to high-humidity environments prior to assembly should prioritize the MSL 1 rated part. For standard manufacturing environments with controlled moisture conditions, either part is suitable for direct substitution.

Frequently Asked Questions (FAQ)

Q: Can AP7353D-30CV4-7 be used as a direct replacement for AP7353-30CV4-7?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, output voltage, current capacity, dropout voltage, and package format. The primary difference is moisture sensitivity level classification.

Q: What does the difference in Moisture Sensitivity Level (MSL) mean for component selection?

A: MSL 1 (AP7353-30CV4-7) allows unlimited exposure to moisture prior to assembly. MSL 3 (AP7353D-30CV4-7) restricts moisture exposure to 168 hours before assembly. Selection depends on storage conditions and manufacturing timeline. Parts with MSL 3 require controlled humidity storage and must be assembled within the specified timeframe after exposure to ambient conditions.

Q: Are the package formats identical between these parts?

A: Yes. Both parts use the 4-XFBGA, WLBGA package format with supplier device package designation X1-WLB0707-4 (Type A1). PCB footprints and assembly processes are identical.

Q: Do these parts have the same protection features?

A: Yes. Both parts include Over Current, Over Temperature, and Short Circuit protection with Enable control features.

Q: What is the operating temperature range for both parts?

A: Both parts operate across -40°C to 85°C (TA), suitable for industrial and commercial temperature environments.