AP7350D-27CF4-7 Equivalent & Substitute Parts

Part Overview

The AP7350D-27CF4-7 is a linear voltage regulator IC from Diodes Incorporated, classified as a Power Management (PMIC) component. This device delivers a fixed positive output of 2.7V at 150mA with integrated current limiting protection and enable control features. The part is currently in active production status with 1157 units available in new original inventory. Alternative part numbers are necessary to support supply chain flexibility, design revisions, and procurement optimization while maintaining identical electrical and mechanical specifications.

Substiute Parts

AP7350D-27CF4-7

Diodes IncorporatedIn Stock: 1239AP7350D-27CF4-7 Datasheet

Current PartRFQ

AP7350-27CF4-7

Diodes IncorporatedIn Stock: 1050AP7350-27CF4-7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AP7350D-27CF4-7 is determined by strict equivalence across the following critical parameters:

• Output voltage specification: 2.7V fixed
• Output current rating: 150mA
• Input voltage maximum: 5.25V
• Dropout voltage: 0.44V @ 150mA
• Package configuration: 4-XFBGA, WLBGA (X2-WLB0606-4)
• Control and protection features: Enable control with current limit protection
• Operating temperature range: -40°C to 85°C
• Regulatory compliance: ROHS3 Compliant, REACH Unaffected

Only parts meeting all these parameters without deviation qualify as direct substitutes. The AP7350-27CF4-7 satisfies all equivalence criteria and is classified as a parametric equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the AP7350D-27CF4-7 and AP7350-27CF4-7 are active production parts from Diodes Incorporated with identical electrical and mechanical specifications. Selection between these parts is based on inventory availability and procurement lead times rather than technical differentiation. The AP7350D-27CF4-7 currently maintains 1157 units in stock, while the AP7350-27CF4-7 has 1027 units available. Both parts carry ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements for industrial and commercial applications. The MSL rating of 1 (Unlimited) indicates no moisture sensitivity constraints during storage and handling.

Frequently Asked Questions (FAQ)

Q: Are AP7350D-27CF4-7 and AP7350-27CF4-7 pin-compatible?

A: Yes. Both parts use the identical 4-XFBGA, WLBGA package configuration (X2-WLB0606-4 supplier device package) with matching pinout and electrical characteristics.

Q: Can I substitute AP7350-27CF4-7 for AP7350D-27CF4-7 in existing designs?

A: Yes. The parts are parametric equivalents with identical output voltage (2.7V), output current (150mA), dropout voltage (0.44V @ 150mA), and all control/protection features. No design modifications are required.

Q: What is the difference between these two part numbers?

A: The parts are functionally and electrically identical. The difference in part numbering reflects internal Diodes Incorporated product designation conventions and does not indicate any technical variation.

Q: Are both parts RoHS compliant?

A: Yes. Both AP7350D-27CF4-7 and AP7350-27CF4-7 are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory standards.

Q: What is the operating temperature range for these regulators?

A: Both parts operate across -40°C to 85°C (TA), suitable for industrial and commercial temperature environments.

Q: Do these parts require special handling for moisture sensitivity?

A: No. Both parts carry MSL rating 1 (Unlimited), indicating no moisture sensitivity constraints. Standard handling procedures apply.