AP7115-10WG-7 Equivalent & Substitute Parts

Part Overview

The AP7115-10WG-7 is a linear voltage regulator IC from Diodes Incorporated designed for positive fixed 1V output applications with 150mA current capacity. This Surface Mount device in SOT-25 packaging is actively produced and widely used in power management circuits requiring low-dropout regulation. Substitute parts are identified when equivalent electrical performance, output voltage matching, and compatible packaging enable direct functional replacement in target applications.

Substiute Parts

AP7115-10WG-7

Diodes IncorporatedIn Stock: 9730AP7115-10WG-7 Datasheet

Current PartRFQ

ADP1713AUJZ-1.0-R7

Analog Devices Inc.In Stock: 3934ADP1713AUJZ-1.0-R7 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the AP7115-10WG-7 are qualified based on the following critical parameters:

• Output Voltage Match: Fixed 1V output voltage
• Input Voltage Compatibility: Maximum input voltage of 5.5V or greater
• Output Configuration: Positive fixed output
• Protection Features: Over Current and Over Temperature protection minimum
• Active Product Status: Currently manufactured and available
• Regulatory Compliance: ROHS3 and REACH compliance maintained

The ADP1713AUJZ-1.0-R7 meets these substitution criteria with enhanced electrical performance characteristics while maintaining the same fixed 1V output voltage specification.

Parameter Comparison

Engineering Selection Recommendations

Both the AP7115-10WG-7 and ADP1713AUJZ-1.0-R7 are active products with ROHS3 compliance and REACH unaffected status, qualifying them for equivalent use in 1V fixed output applications. The ADP1713AUJZ-1.0-R7 provides higher output current capacity (300mA versus 150mA), lower dropout voltage, and extended operating temperature range to 125°C. Selection between these parts depends on circuit current requirements and thermal operating conditions. Both devices include Over Current and Over Temperature protection. The ADP1713AUJZ-1.0-R7 additionally provides Under Voltage Lockout (UVLO) protection and Bypass control features.

Frequently Asked Questions (FAQ)

Q: Can the ADP1713AUJZ-1.0-R7 directly replace the AP7115-10WG-7?

A: Functional replacement is possible when output current requirements do not exceed 150mA and the circuit design accommodates the different package footprint (SOT-23-5 versus SOT-25). Both devices deliver identical 1V fixed output voltage with compatible input voltage specifications.

Q: What are the package differences between these parts?

A: The AP7115-10WG-7 uses SOT-25 packaging while the ADP1713AUJZ-1.0-R7 uses SOT-23-5 (TSOT-23-5) packaging. These are different physical footprints requiring PCB layout modifications for direct substitution.

Q: Does the ADP1713AUJZ-1.0-R7 offer performance advantages?

A: The ADP1713AUJZ-1.0-R7 provides lower dropout voltage (0.23V versus 0.3V), lower quiescent current (70µA versus 80µA), higher PSRR (72dB versus 70dB), and extended temperature range (-40°C to 125°C versus -40°C to 85°C). Output current capacity is doubled to 300mA.

Q: Are both parts suitable for industrial temperature applications?

A: The AP7115-10WG-7 operates to 85°C junction temperature. The ADP1713AUJZ-1.0-R7 extends to 125°C, providing broader thermal operating range for demanding environments.

Q: What protection features are included?

A: Both parts include Over Current and Over Temperature protection. The ADP1713AUJZ-1.0-R7 additionally integrates Under Voltage Lockout (UVLO) protection.