Request Quote
(Ships tomorrow)
AP2511AS-13 Equivalent & Substitute Parts
Part Overview
The AP2511AS-13 is an active power switch IC manufactured by Diodes Incorporated, classified as a Power Management (PMIC) device. This component functions as a P-Channel power switch with 1:1 input-to-output ratio, designed for USB switching applications requiring high-side load control. The device is currently in active production status with 7800 units available in inventory. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to supply constraints, design flexibility, or inventory optimization.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Manufacturer Part Number | AP2511AS-13 |
| Manufacturer | Diodes Incorporated |
| Category | Power Management (PMIC) |
| Switch Type | USB Switch |
| Output Type | P-Channel |
| Output Configuration | High Side |
| Current - Output (Max) | 2A |
| Voltage - Load | 2.7V ~ 5.5V |
| Rds On (Typ) | 70mOhm |
| Package / Case | 8-SOIC (0.154", 3.90mm Width) |
| Operating Temperature | -40°C ~ 85°C (TA) |
| RoHS Status | ROHS3 Compliant |
| Product Status | Active |
Substitute Part Grouping Explanation
Substitute parts for the AP2511AS-13 are qualified based on the following critical parameters that determine functional and mechanical interchangeability:
- Output Type: P-Channel configuration
- Output Configuration: High Side switching topology
- Current Rating: 2A maximum output current
- Voltage Range: 2.7V ~ 5.5V load voltage compatibility
- On-Resistance: 70mOhm typical Rds(on)
- Package: 8-SOIC form factor with identical 0.154" width and 3.90mm dimensions
- Fault Protection: Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
- Features: Load Discharge, Slew Rate Controlled, Status Flag
- Compliance: ROHS3 Compliant, REACH Unaffected
The substitute parts AP2311AS-13 and AP2411AS-13 maintain identical electrical specifications and mechanical packaging, enabling direct substitution in applications requiring P-Channel USB power switching with 2A output capability.
Parameter Comparison
| Parameter | AP2511AS-13 | AP2311AS-13 | AP2411AS-13 |
|---|---|---|---|
| Manufacturer | Diodes Incorporated | Diodes Incorporated | Diodes Incorporated |
| Category | Power Management (PMIC) | Power Management (PMIC) | Power Management (PMIC) |
| Switch Type | USB Switch | USB Switch | USB Switch |
| Output Type | P-Channel | P-Channel | P-Channel |
| Output Configuration | High Side | High Side | High Side |
| Current - Output (Max) | 2A | 2A | 2A |
| Voltage - Load | 2.7V ~ 5.5V | 2.7V ~ 5.5V | 2.7V ~ 5.5V |
| Rds On (Typ) | 70mOhm | 70mOhm | 70mOhm |
| Package / Case | 8-SOIC (0.154", 3.90mm Width) | 8-SOIC (0.154", 3.90mm Width) | 8-SOIC (0.154", 3.90mm Width) |
| Operating Temperature | -40°C ~ 85°C (TA) | -40°C ~ 85°C (TA) | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount | Surface Mount | Surface Mount |
| RoHS Status | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) |
| REACH Status | REACH Unaffected | REACH Unaffected | REACH Unaffected |
| Product Status | Active | Active | Active |
| Inventory (Pcs) | 7800 | 2700 | 7700 |
Engineering Selection Recommendations
All three parts—AP2511AS-13, AP2311AS-13, and AP2411AS-13—are active production components from Diodes Incorporated with identical electrical and mechanical specifications. Selection between these parts is based on availability and supply chain requirements rather than technical differentiation.
All parts maintain ROHS3 compliance and REACH unaffected status, meeting regulatory requirements for industrial and consumer applications. The 8-SOIC package format is consistent across all variants, ensuring PCB layout compatibility without design modification.
Inventory levels vary: AP2511AS-13 (7800 units), AP2411AS-13 (7700 units), and AP2311AS-13 (2700 units). Component selection should prioritize availability aligned with production schedules and supply chain optimization.
Frequently Asked Questions (FAQ)
Q: Can AP2311AS-13 or AP2411AS-13 be used as direct replacements for AP2511AS-13?
A: Yes. All three parts share identical electrical specifications including 2A output current, 70mOhm on-resistance, 2.7V–5.5V load voltage range, and 8-SOIC packaging. Direct substitution is supported without circuit modification.
Q: Are there any differences in fault protection between these parts?
A: No. All three variants include identical fault protection: Current Limiting (Fixed), Over Temperature, Reverse Current, and UVLO (Under Voltage Lock Out).
Q: Do these parts require different PCB layouts or footprints?
A: No. All parts use the 8-SOIC package with 0.154" width and 3.90mm dimensions, enabling identical PCB footprints and assembly processes.
Q: What is the operating temperature range for all substitute parts?
A: All parts operate across -40°C to 85°C (TA), supporting industrial and commercial temperature requirements.
Q: Are all parts RoHS and REACH compliant?
A: Yes. All three parts are ROHS3 compliant and REACH unaffected, meeting environmental and regulatory standards.
Q: Which part should be selected based on availability?
A: Selection should be based on current inventory levels and supply chain requirements. AP2511AS-13 and AP2411AS-13 have higher inventory (7800 and 7700 units respectively) compared to AP2311AS-13 (2700 units).
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts

