AP2501MP-13 Equivalent & Substitute Parts

Part Overview

The AP2501MP-13 is a Power Switch/Driver IC manufactured by Diodes Incorporated, designed for high-side P-channel switching applications with 1:1 input-output ratio. This component operates as a USB Switch with integrated load discharge and status flag capabilities. The AP2501MP-13 is classified as Obsolete, making identification of active equivalent parts essential for new designs and ongoing production support. The substitute part AP2511MP-13 provides functional continuity with identical electrical specifications and active product status.

Key Parameters

Parameter	Value
Manufacturer	Diodes Incorporated
Category	Power Management (PMIC)
Switch Type	USB Switch
Output Type	P-Channel
Number of Outputs	1
Ratio - Input:Output	1:1
Output Configuration	High Side
Current - Output (Max)	2.5A
Voltage - Load	2.7V ~ 5.5V
Rds On (Typ)	70mOhm
Input Type	Non-Inverting
Features	Load Discharge, Status Flag
Fault Protection	Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Operating Temperature	-40°C ~ 85°C (TA)
Package / Case	8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

The AP2511MP-13 qualifies as a parametric equivalent to the AP2501MP-13 based on strict alignment of the following critical parameters:

Switch Type: USB Switch (identical)
Output Type: P-Channel (identical)
Number of Outputs: 1 (identical)
Ratio - Input:Output: 1:1 (identical)
Output Configuration: High Side (identical)
Current - Output (Max): 2.5A (identical)
Voltage - Load: 2.7V ~ 5.5V (identical)
Rds On (Typ): 70mOhm (identical)
Input Type: Non-Inverting (identical)
Features: Load Discharge, Status Flag (identical)
Fault Protection: Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO (identical)
Operating Temperature: -40°C ~ 85°C (TA) (identical)
Package / Case: 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad (identical)
Mounting Type: Surface Mount (identical)

The primary distinction between these parts is product status: AP2501MP-13 is Obsolete, while AP2511MP-13 is Active. Both parts maintain identical electrical and mechanical specifications, enabling direct substitution in applications requiring the specified performance envelope.

Parameter Comparison

Parameter	AP2501MP-13	AP2511MP-13
Manufacturer	Diodes Incorporated	Diodes Incorporated
Product Status	Obsolete	Active
Switch Type	USB Switch	USB Switch
Output Type	P-Channel	P-Channel
Number of Outputs	1	1
Ratio - Input:Output	1:1	1:1
Output Configuration	High Side	High Side
Current - Output (Max)	2.5A	2.5A
Voltage - Load	2.7V ~ 5.5V	2.7V ~ 5.5V
Rds On (Typ)	70mOhm	70mOhm
Input Type	Non-Inverting	Non-Inverting
Features	Load Discharge, Status Flag	Load Discharge, Status Flag
Fault Protection	Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO	Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Operating Temperature	-40°C ~ 85°C (TA)	-40°C ~ 85°C (TA)
Package / Case	8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad	8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
Mounting Type	Surface Mount	Surface Mount
RoHS Status	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)
REACH Status	REACH Unaffected	REACH Unaffected
ECCN	EAR99	EAR99

Engineering Selection Recommendations

The AP2511MP-13 is the recommended substitute for the obsolete AP2501MP-13. Both parts maintain identical electrical performance characteristics, mechanical compatibility, and regulatory compliance status. The AP2511MP-13 carries Active product status, ensuring long-term availability and manufacturing support. Both components are ROHS3 Compliant, REACH Unaffected, and classified under ECCN EAR99, meeting equivalent regulatory requirements for industrial and commercial applications. The identical package specification (8-MSOP-EP with 0.118" width, 3.00mm) and surface mount configuration enable direct PCB layout compatibility without design modification.

Frequently Asked Questions (FAQ)

Q: Can AP2511MP-13 be used as a direct replacement for AP2501MP-13?

A: Yes. The AP2511MP-13 provides complete parametric equivalence to the AP2501MP-13 across all electrical and mechanical specifications. No circuit design changes are required for substitution.

Q: What is the primary reason for substituting AP2501MP-13?

A: The AP2501MP-13 is classified as Obsolete. The AP2511MP-13 is an Active product offering identical specifications with assured long-term availability and manufacturing support.

Q: Are the packages physically identical?

A: Yes. Both parts use the 8-MSOP-EP package with 0.118" width and 3.00mm height. PCB footprints are identical, and no layout modifications are necessary.

Q: Do both parts meet the same regulatory standards?

A: Yes. Both AP2501MP-13 and AP2511MP-13 are ROHS3 Compliant, REACH Unaffected, and classified as EAR99. Regulatory compliance is equivalent.

Q: What is the difference between AP2501MP-13 and AP2511MP-13?

A: The only difference is product status. AP2501MP-13 is Obsolete, while AP2511MP-13 is Active. All electrical, mechanical, and regulatory parameters are identical.

Q: Are there any performance differences in current handling or thermal characteristics?

A: No. Both parts specify identical maximum output current (2.5A), on-resistance (70mOhm typical), and operating temperature range (-40°C ~ 85°C).

Q: What packaging options are available for AP2511MP-13?

A: AP2511MP-13 is available in Tape & Reel (TR) packaging. Both parts use the same 8-MSOP-EP component package.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message